ESD218B102ELE6327XTMA1

Protection Device TVS (Transient Voltage Suppressor) ESD218-B1 Series Bi-directional, 24 V, 3 pF, 0201, 0402, RoHS and Halogen Free compliant ESD218-B1-02ELS ESD218-B1-02EL Data Sheet Revision 1.1, 2015-01-13 Final Power Management & Multimarket Edition 2015-01-13 Published by Infineon Technologies AG 81726 Munich, Germany © 2015 Infineon Technologies AG All Rights Reserved. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com) Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. ESD218-B1 Series Product Overview 1 Product Overview 1.1 Features • • • • • • ESD / transient protection according to: – IEC61000-4-2 (ESD): ±20 kV (air), ±18 kV (contact) – IEC61000-4-4 (EFT): ±2 kV / 40 A (5/50 ns) – IEC61000-4-5 (Surge): ±1.5 A (8/20 μs) Bi-directional, working voltage up to VRWM = ±24 V Low capacitance: CL = 3 pF (typical) Low clamping voltage: VCL = 51 V (typical) at ITLP = 16 A Very low reverse current. IR = < 1nA (typical) Pb-free (RoHS compliant) and halogen free package 1.2 • • • • Application Examples ESD protection of USB-battery charger interface LCD Backlight protection NFC antenna protection Protection of high speed bus rated up to ±24 V 1.3 Product Description Pin 1 marking (lasered) Pin 1 Pin 1 Pin 2 Pin 2 PinConf_and_SchematicDiag.vsd Figure 1-1 Pin Configuration and Schematic Diagram Table 1-1 Part Information Type Package Configuration Marking code ESD218-B1-02ELS TSSLP-2-4 1 line, bi-directional 4 ESD218-B1-02EL TSLP-2-20 1 line, bi-directional AA Final Data Sheet 3 Revision 1.1, 2015-01-13 ESD218-B1 Series Maximum Ratings 2 Maximum Ratings Table 2-1 Maximum Ratings at TA = 25 °C, unless otherwise specified 1) Parameter Symbol 2) Values Unit ESD air discharge ESD contact discharge2) VESD ±20 ±18 kV Peak pulse power3) PPK 67 W Peak pulse current3) IPP ±1.5 A Operating temperature range TOP -55 to 150 °C Storage temperature Tstg -65 to 150 °C 1) Device is electrically symmetrical 2) VESD according to IEC61000-4-2 3) Non-repetitive current pulse 8/20µs exponential decay waveform according to IEC61000-4-5 Attention: Stresses above the max. values listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the integrated circuit. 3 Electrical Characteristics     

   
             
  




  
 
     




  $%  
 & %'
 &
 %( 
   &  &(          !"  !! #   Figure 3-1 Definitions of electrical characteristics Final Data Sheet 4 Revision 1.1, 2015-01-13 ESD218-B1 Series Electrical Characteristics Table 3-1 DC Characteristics at TA = 25 °C, unless otherwise specified 1) Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Reverse working voltage VRWM -24 – 24 V Breakdown voltage VBR 24.3 25.5 30 V IT = 1 mA Reverse leakage current IR –