ESD3V3U4ULCE6327XTSA1

TVS Diodes Transient Voltage Suppressor Diodes ESD3V3U4ULC Ultra-low Capacitance ESD / Transient Protection Array ESD3V3U4ULC Data Sheet Rev. 1.6, 2013-02-20 Final Power Management & Multimarket Edition 2013-02-20 Published by Infineon Technologies AG 81726 Munich, Germany © 2013 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. ESD3V3U4ULC Revision History Revision 1.5, 2012-12-05 Page or Item Subjects (major changes since previous revision) Rev. 1.6, 2013-02-20 6 Small updateds in Table 3 Trademarks of Infineon Technologies AG AURIX™, BlueMoon™, COMNEON™, C166™, CROSSAVE™, CanPAK™, CIPOS™, CoolMOS™, CoolSET™, CORECONTROL™, DAVE™, EasyPIM™, EconoBRIDGE™, EconoDUAL™, EconoPACK™, EconoPIM™, EiceDRIVER™, EUPEC™, FCOS™, HITFET™, HybridPACK™, ISOFACE™, I²RF™, IsoPACK™, MIPAQ™, ModSTACK™, my-d™, NovalithIC™, OmniTune™, OptiMOS™, ORIGA™, PROFET™, PRO-SIL™, PRIMARION™, PrimePACK™, RASIC™, ReverSave™, SatRIC™, SIEGET™, SINDRION™, SMARTi™, SmartLEWIS™, TEMPFET™, thinQ!™, TriCore™, TRENCHSTOP™, X-GOLD™, XMM™, X-PMU™, XPOSYS™. Other Trademarks Advance Design System™ (ADS) of Agilent Technologies, AMBA™, ARM™, MULTI-ICE™, PRIMECELL™, REALVIEW™, THUMB™ of ARM Limited, UK. AUTOSAR™ is licensed by AUTOSAR development partnership. Bluetooth™ of Bluetooth SIG Inc. CAT-iq™ of DECT Forum. COLOSSUS™, FirstGPS™ of Trimble Navigation Ltd. EMV™ of EMVCo, LLC (Visa Holdings Inc.). EPCOS™ of Epcos AG. FLEXGO™ of Microsoft Corporation. FlexRay™ is licensed by FlexRay Consortium. HYPERTERMINAL™ of Hilgraeve Incorporated. IEC™ of Commission Electrotechnique Internationale. IrDA™ of Infrared Data Association Corporation. ISO™ of INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. MATLAB™ of MathWorks, Inc. MAXIM™ of Maxim Integrated Products, Inc. MICROTEC™, NUCLEUS™ of Mentor Graphics Corporation. Mifare™ of NXP. MIPI™ of MIPI Alliance, Inc. MIPS™ of MIPS Technologies, Inc., USA. muRata™ of MURATA MANUFACTURING CO., MICROWAVE OFFICE™ (MWO) of Applied Wave Research Inc., OmniVision™ of OmniVision Technologies, Inc. Openwave™ Openwave Systems Inc. RED HAT™ Red Hat, Inc. RFMD™ RF Micro Devices, Inc. SIRIUS™ of Sirius Sattelite Radio Inc. SOLARIS™ of Sun Microsystems, Inc. SPANSION™ of Spansion LLC Ltd. Symbian™ of Symbian Software Limited. TAIYO YUDEN™ of Taiyo Yuden Co. TEAKLITE™ of CEVA, Inc. TEKTRONIX™ of Tektronix Inc. TOKO™ of TOKO KABUSHIKI KAISHA TA. UNIX™ of X/Open Company Limited. VERILOG™, PALLADIUM™ of Cadence Design Systems, Inc. VLYNQ™ of Texas Instruments Incorporated. VXWORKS™, WIND RIVER™ of WIND RIVER SYSTEMS, INC. ZETEX™ of Diodes Zetex Limited. Last Trademarks Update 2010-06-09 Final Data Sheet 3 Rev. 1.6, 2013-02-20 ESD3V3U4ULC Ultra-low Capacitance ESD / Transient Protection Array 1 Ultra-low Capacitance ESD / Transient Protection Array 1.1 Features • • • • • • • ESD / transient protection of high speed data lines exceeding: – IEC61000-4-2 (ESD): ±20 kV (air/contact) – IEC61000-4-4 (EFT): ±2.5 kV (5/50ns) – IEC61000-4-5 (Surge): ±3 A (8/20μs) Maximum working voltage: VRWM = 3.3 V Ultra low capacitance CL = 0.4 pF I/O to GND (typical) Very low clamping voltage: VCL = 8 V (typical) at IPP = 16 A Very low dynamic resistance: RDYN = 0.19 Ω (typical) TSLP-9-1 package with pad pitch 0.5 mm, optimized pad design to simplify PCB layout Pb-free and halogen free package (RoHS compliant) 1.2 • • • Application Examples USB 3.0, 10/100/1000 Ethernet, Firewire DVI, HDMI, S-ATA, DisplayPort Mobile HDMI Link, MDDI, MIPI, etc. 1.3 Product Description Pin 9 Pin 8 Pin 1 Pin 2 Pin 3 Pin 7 Pin 6 Pin 4 Pin 5 Pin 1 Pin 2 Pin 4 Pin 5 GND Pin 3 a) Pin configuration b) Schematic diagram PG-TSLP-9-1_PinConf_and_SchematicDiag.vsd Figure 1 Pin Configuration and Schematic Diagram Table 1 Ordering Information Type Package Configuration ESD3V3U4ULC TSLP-9-1 4 lines, uni-directional Final Data Sheet 4 Marking code Z2 Rev. 1.6, 2013-02-20 ESD3V3U4ULC Characteristics 2 Characteristics Table 2 Maximum Rating at TA = 25 °C, unless otherwise specified Parameter Symbol Values Unit Min. Typ. Max. VESD -20 – 20 kV IPP -3 – 3 A Operating temperature TOP -40 – 125 °C Storage temperature 1) VESD according to IEC61000-4-2 2) IPP according to IEC61000-4-5 Tstg -65 – 150 °C ESD contact discharge 1) Peak pulse current (tp = 8/20 μs) 2.1 2) Electrical Characteristics at TA = 25 °C, unless otherwise specified    

 
   

      

   




     
     Figure 2
  

  
 & 
 

 
 





                    " %  !    
      !#$   " $  !#$         Definitions of electrical characteristics[1] Final Data Sheet 5 Rev. 1.6, 2013-02-20 ESD3V3U4ULC Characteristics Table 3 DC Characteristics at TA = 25 °C, unless otherwise specified Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. VRWM – – 3.3 V I/O to GND Reverse current IR – 1 50 nA I/O to GND, VR = 3.3 V Breakdown voltage1) VBR – 6.2 – V I/O to GND, Vt1 – 6.2 – V I/O to GND, Vh 3.35 4 4.4 V I/O to GND, IR = 10 mA Reverse working voltage 1) 1) Reverse trigger voltage2) Reverse holding voltage 2) 1) Voltage forced 2) Current forced Table 4 RF Characteristics at TA = 25 °C, unless otherwise specified Parameter Symbol 1) Line capacitance CL Values Unit Note / Test Condition Min. Typ. Max. – 0.4 0.65 pF VR = 0 V, f = 1 MHz, I/O to GND – 0.2 0.35 pF VR = 0 V, f = 1 MHz, I/O to I/O Channel capacitance matching between I/O to GND ∆Ci/o-GND – 0.035 – pF VR = 0 V, f = 1 MHz, I/O to GND Channel capacitance matching between I/O to I/O ∆Ci/o-i/o – 0.017 – pF VR = 0 V, f = 1 MHz, I/O to I/O 1) Total capacitance line to ground Final Data Sheet 6 Rev. 1.6, 2013-02-20 ESD3V3U4ULC Characteristics Table 5 ESD Characteristics at TA = 25 °C, unless otherwise specified Parameter Symbol 1) Clamping volage VCL Values Min. Typ. Max. – 4.8 – – 6.2 – Unit Note / Test Condition V IPP = 1 A, tp = 8/20µs from I/O to GND IPP = 3 A, tp = 8/20µs from I/O to GND 2) Clamping voltage Forward clamping voltage1) VCL VFC – 8 – ITLP = 16 A, from I/O to GND – 11 – ITLP = 30 A, from I/O to GND – 1.4 – IPP = 1 A, tp = 8/20µs from GND to I/O Forward clamping voltage2) Dynamic resistance2) VFC RDYN – 2.3 – IPP = 3 A, tp = 8/20µs from GND to I/O – 6 – ITLP = 16 A, from GND to I/O – 9 – ITLP = 30 A, from GND to I/O – 0.19 – Ω I/O to GND – 0.23 – Ω GND to any I/O 1) IPP according to IEC61000-4-5 2) Please refer to Application Note AN210. TLP parameter: Z0 = 50 Ω , tp = 100ns, tr = 300ps, averaging window: t1 = 30 ns to t2 = 60 ns, extraction of dynamic resistance using least squares fit of TLP characteristic between IPP1 = 10 A and IPP2 = 40 A [2]. Final Data Sheet 7 Rev. 1.6, 2013-02-20 ESD3V3U4ULC Typical Characteristics at TA = 25 °C, unless otherwise specified Typical Characteristics at TA = 25 °C, unless otherwise specified IR [A] 3 -7 10 -8 10 -9 10 -10 10 -11 10 -12 0 1 2 VR [V] 3 4 Reverse current, IR = (VR) 10 -6 10 -7 10 -8 IR [A] Figure 3 10 10-9 25 50 75 100 125 150 TA [°C] Figure 4 Reverse current: IR = f(TA), VR = 3.3 V Final Data Sheet 8 Rev. 1.6, 2013-02-20 ESD3V3U4ULC Typical Characteristics at TA = 25 °C, unless otherwise specified 0.8 1MHz 1GHz 0.7 CL [pF] 0.6 0.5 0.4 0.3 0.2 Figure 5 0 0.5 1 1.5 2 VR [V] 2.5 3 3.5 Line capacitance: CL = f(VR), f = 1MHz, from I/O to GND Final Data Sheet 9 Rev. 1.6, 2013-02-20 ESD3V3U4ULC Typical Characteristics at TA = 25 °C, unless otherwise specified 50 ESD3V3U4UCL RDYN 20 40 15 30 RDYN = 0.19 Ω ITLP [A] 10 5 0 0 -10 -5 -20 Equivalent VIEC [kV] 10 20 -10 RDYN = 0.23 Ω -30 -15 -40 -20 -50 -20 -15 -10 -5 0 5 10 15 20 VTLP [V] Figure 6 Clamping voltage (TLP): ITLP = f(VTLP) according ANSI/ESD STM5.5.1- Electrostatic Discharge Sensitivity Testing using Transmission Line Pulse (TLP) Model. TLP conditions: Z0 = 50 Ω, tp = 100 ns, tr = 0.6 ns, ITLP and VTLP averaging window: t1 = 30 ns to t2 = 60 ns, extraction of dynamic resistance using squares fit to TLP characteristics between ITLP1 = 10 A and ITLP2 = 40 A. Please refer to Application Note AN210[2] Final Data Sheet 10 Rev. 1.6, 2013-02-20 ESD3V3U4ULC Typical Characteristics at TA = 25 °C, unless otherwise specified 5 ESD3V3U4ULC RDYN 4 3 RDYN = 0.70 Ω 2 IPP [A] 1 0 -1 -2 RDYN = 0.44 Ω -3 -4 -5 -10 Figure 7 -8 -6 -4 -2 0 VCL [V] 2 4 6 8 10 Pulse current (IEC61000-4-5) versus clamping voltage: IPP = f(VCL) Final Data Sheet 11 Rev. 1.6, 2013-02-20 ESD3V3U4ULC Typical Characteristics at TA = 25 °C, unless otherwise specified 100 Scope: 6 GHz, 20 GS/s 80 VCL [V] 60 VCL-max-peak = 89 V 40 VCL-30ns-peak = 8 V 20 0 -20 Figure 8 0 100 200 300 tp [ns] 400 500 600 Clamping voltage at +8 kV discharge according IEC61000-4-2 (R = 330 Ω, C = 150 pF) 20 Scope: 6 GHz, 20 GS/s 0 VCL [V] -20 -40 VCL-max-peak = -86 V -60 VCL-30ns-peak = -6 V -80 -100 Figure 9 0 100 200 tp [ns] 300 400 Clamping voltage at -8 kV discharge according IEC61000-4-2 (R = 330 Ω, C = 150 pF) Final Data Sheet 12 Rev. 1.6, 2013-02-20 ESD3V3U4ULC Typical Characteristics at TA = 25 °C, unless otherwise specified 150 Scope: 6 GHz, 20 GS/s 125 100 VCL [V] 75 VCL-max-peak = 124 V 50 VCL-30ns-peak = 12 V 25 0 -25 -50 Figure 10 0 100 200 tp [ns] 300 400 Clamping voltage at +15 kV discharge according IEC61000-4-2 (R = 330 Ohm, C = 150 pF) 50 Scope: 6 GHz, 20 GS/s 25 0 VCL [V] -25 -50 -75 VCL-max-peak = -121 V -100 VCL-30ns-peak = -9 V -125 -150 Figure 11 0 100 200 tp [ns] 300 400 Clamping voltage at -15 kV discharge according IEC61000-4-2 (R = 330 Ω, C = 150 pF) Final Data Sheet 13 Rev. 1.6, 2013-02-20 ESD3V3U4ULC Application Information 4 Application Information To design USB3.0 link for best system level ESD performance and error free Signal Integrity is mandatory. To bring both requirements together, the ESD protection devices has to provide excellent ESD and a very low device capacitance. The Infineon ESD3V3U4ULC in “array” configuration, combined with a clear and straight forward “full through” layout fulfills these requirements in the best way. TVS ESD diodes TX+ TX+ TX+ + - SuperSpeed Data IN RXTX- USB3.0: SS-Hub e.g. PC TXmated connector + RX+ RX- SuperSpeed Data OUT + - TXUSB3.0 cable SS transmission channel RX+ SuperSpeed Data OUT RX+ mated connector USB3.0: SS-Device e.g. storage RX+ TX+ TX- RX- + - SuperSpeed Data IN RX- TVS ESD diodes Figure 12 USB3.0 structure with ESD protection devices [3] Final Data Sheet 14 Rev. 1.6, 2013-02-20 ESD3V3U4ULC Ordering Information Scheme 5 ESD Ordering Information Scheme 0P1 RF - XX YY Package XX = Pin number (i.e.: 02 = 2 pins; 03 = 3 pins) YY = Package family: LS = TSSLP LRH = TSLP For Radio Frequency Applications Line Capacitance C L in pF: (i.e.: 0P1 = 0.1pF) ESD 5V3 U n U - XX YY Package or Application XX = Pin number (i.e.: 02 = 2 pins; 03 = 3 pins) YY = Package family: LS = TSSLP LRH = TSLP S = SOT363 U = SC74 XX = Application family: LC = Low Clamp HDMI Uni- / Bi-directional or Rail to Rail protection Number of protected lines (i.e.: 1 = 1 line; 4 = 4 lines) Capacitance: Standard (>10pF), Low (