EVALM10565DTOBO1

Product Brief iMOTION™ MADK platform Complete and scalable system solution for motor drives Infineon Technolgies introduces the new iMOTION™ Modular Application Design Kit (MADK) platform for evaluation and testing compact and flexible 3 phase motor drive system solutions. Key benefits ››Easy to set up a complete motor drive system in less than 1 hour The iMOTION™ MADK evaluation platform covers 115/230 V motor drive applications up to 300 W. The platform is offering a modular and scalable system solution with 2 different control board options and a range of power boards. One control board option is a standard ARM® Cortex®-M0 Microcontroller XMC1302 with tailored motor control peripherals and MATH hardware accelerator. Another option is an iMOTION™ IRMCK099 digital motion control IC with integrated Motor Control Engine (MCE). The first iMOTION™ MADK evaluation kits combine two control board options with four different power bards. Using iMOTION™ MADK standardized M1 platform Interface, different control and power boards can be combined in a system that perfectly matches the requirements of the application. This modular approach with a standardized interface between the different controller and bower boards allows users to mix and match for a maximum flexibility and scalability during evaluation and development phase at affordable cost. Block diagram with XMC1302 based MADK Your PC MADK control software Control board J-link Power board Microcontroller XMC1302 Hall sensor/ 3D magnetic sensor interface www.infineon.com/MADK Rectifier 20-pin connector Grid connector with EMI filter DC-link Your motor 3-phase inverter µIPM™ M ››Fast time to market – reduced design time & effort ››Standard MADK platform M1 inter- face enables modularity, flexibility and scalability ››Scalable power levels with µIPM™ and µIPM™-DIP Key features ››MCU control card with XMC1302 MCU and SEGGER J-Link debug interface ––µC Probe-based GUI for motor paramet­rization and tuning with XMC1302 ––FOC motor control Software for XMC1302 ––Fully supported by Infineon’s freeof-charge DAVE™ IDE and other 3rd party ARM® IDEs (For XMC 1302) ››Alternatively IRMCK099 Control Card with MCE TOOL V2 ––MCE Designer GUI for motor parametrization and tuning with IRMCK099 ––Hardware implemented FOC algorithm 4 different power boards with µIPM™ ›› or µIPM™-DIP with intregrated 500 V or 250 V MOSFET & 600 V Gate-Driver Product Brief iMOTION™ MADK platform Complete and scalable system solution for motor drives Controller board Power board EVAL-M1-099M IRMCK099 control card M1 platform interface Board EVAL-M1-36-84A µIPM™ power board IRSM836-084MA 250 V EVAL-M1-1302 XMC1302 control card EVAL-M1-36-45A µIPM™ power board IRSM836-045MA 500 V EVAL-M1-05-84D µIPM™-DIP power board IRSM505-084DA2 250 V EVAL-M1-05-65D µIPM™-DIP power board IRSM505-065DA2 500 V EVAL-M1-1302_36-84A XMC1302 control card / powerstage based on IRSM836-084MA, µIPM™, 250 V Kit EVAL-M1-1302_36-45A XMC1302 control card / powerstage based on IRSM836-045MA, µIPM™, 500 V EVAL-M1-1302_05-84D XMC1302 control card / powerstage based on IRSM505-084DA2, µIPM™-DIP, 250 V EVAL_M1-1302_05-65D XMC1302 control card / powerstage based on IRSM505-065DA2, µIPM™-DIP, 500 V Full compatibility within M1 platform interface MADK platform evaluation boards & kits Evaluation board/kit Content OPN SP number Eval-M1-05-65D IRSM505-065DA2 µIPM-DIP, mounted on the board ,3-pole & 5-pole connector EVALM10565DTOBO1 SP001591474 Eval-M1-05-84D IRSM505-084DA2 µIPM-DIP, mounted on the board, 3-pole & 5-pole connector EVALM10584DTOBO1 SP001591850 Eval-M1-36-45A IRSM836-045A µIPM, mounted on the board EVALM13645ATOBO1 SP001592052 Eval-M1-36-84A IRSM836-084A µIPM, mounted on the board EVALM13684ATOBO1 SP001592062 Eval-M1-099M IRMCK099 mounted on the board & MCE TOOL V2 & required. wires EVALM1099MTOBO1 SP001591856 Eval-M1-1302 XMC1302, mounted on the board EVALM11302TOBO1 SP001591894 Eval-M1-1302_05-65D Eval-M1-1302, Eval-M1-05-65D, USB cable, 3-pole & 5-pole connector EVALM113020565DTOBO1 SP001591902 Eval-M1-1302_05-84D Eval-M1-1302, Eval-M1-05-84D, USB cable, 3-pole & 5-pole connector EVALM113020584DTOBO1 SP001591814 Eval-M1-1302_36-45A Eval-M1-1302, Eval-M1-36-45A, USB cable EVALM113023645ATOBO1 SP001592034 Eval-M1-1302_36-84A Eval-M1-1302, Eval-M1-36-84A, USB cable EVALM113023684ATOBO1 SP001592044 Published by Infineon Technologies AG 81726 Munich, Germany Evaluation boards & kits are not commercial products and are solely intended to be used for evaluation and testing purposes. They shall not to be used for reliability testing or production. © 2016 Infineon Technologies AG. All Rights Reserved. The customer shall ensure that each evaluation board & kit is handled in a way which is compliant with all relevant requirements and standards in the country in which it is operated. Order Number: B133-I0296-V1-7600-EU-EC-P Date: 05 / 2016 Please note! Evaluation boards & kits are provided “as is”. We disclaim any and all warranties, express or implied, including but not limited to any warranties of non-compliance with any specification, non-infringement of third party rights and implied warranties of fitness for any purpose or for merchantability. The customer accepts the entire risk arising out of the use of the evaluation boards & kits for any purpose for which the evaluation boards & kits are not intended, including but not limited to any further processing or distribution of the evaluation board & kits. This document is for information purposes only and any information given herein shall in no event be regarded as a warranty, guarantee or description of any functionality, conditions and/ or quality of the evaluation boards & kits or any suitability for a particular purpose. We reserve the right to change this document and/or the information given herein at any time. For further information, please contact your nearest Infineon Technologies office (www.infineon.com) Warnings Due to technical requirements, our products may contain dangerous substances. For information on the types in question, please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by us in a written document signed by authorized representatives of Infineon Technologies, our products may not be used in any life-­ endangering applications, including but not limited to medical, nuclear, military, life-critical or any other applications where a failure of the product or any consequences of the use thereof can result in personal injury.