FM0-100L-S6E1B8

FM0-100L-S6E1B8 - ARM® Cortex®-M0+ MCU Starter Kit with USB and SD Card Interface Last Updated: Nov 30, 2015 Version: ** The FM0-100L-S6E1B8 MCU Starter Kit is a low cost development platform for Cypress's FM0+ S6E1B-Series, ® ® a Flexible Microcontroller family with an ultra-low-power 32-bit ARM Cortex -M0+ CPU. This kit enables rapid development of embedded systems with onboard interfaces including USB, micro SD Card and an ™ Arduino Uno-compatible form-factor to prototype with Arduino shields. Coming Soon in December 2015! ® Featuring the FM0+ S6E1B-Series: ARM  Cortex-M0+ MCU ® • 40MHz ARM Cortex-M0+ MCU with 64-channel DMA • 560KB flash, 64KB SRAM and 82 GPIOs ® • High efficiency 52µA/CoreMark Score  • Ultra-low-power consumption: Active - 65µA/MHz and Standby - 0.6µA • Advanced peripherals: USB host and device, AES Encryption, HDMI-CEC and 8x Serial Interfaces Flexible Arduino Uno Form-factor with Onboard sensors and CMSIS-DAP Debugger • Arduino Uno form-factor to prototype with shields • Includes onboard accelerometer, SD card interface, stereo codec, potentiometer and an RGB LED ® • ARM  CMSIS-DAP interface for programming and debugging of the S6E1B8 device Kit Contents: • FM0+ S6E1B-Series Starter Board • USB Standard-A to Micro-B cable • Quick Start Guide http://www.cypress.com/documentation/development-kitsboards/fm0-100l-s6e1b8-arm-cor... 1/20/2016