FS100R12W2T7
EasyPACK™ module
EasyPACK™ module with TRENCHSTOP™IGBT7 and emitter controlled 7 diode and NTC
Features
• Electrical features
- VCES = 1200 V
- IC nom = 100 A / ICRM = 200 A
- Low VCE,sat
- Overload operation up to 175°C
- TRENCHSTOPTM IGBT7
• Mechanical features
- Solder contact technology
- High power density
- Compact design
- 2.5 kV AC 1 minute insulation
- Al2O3 substrate with low thermal resistance
Potential applications
•
•
•
•
•
Air conditioning
Auxiliary inverters
Motor drives
Servo drives
UPS systems
Product validation
• Qualified for industrial applications according to the relevant tests of IEC 60747, 60749 and 60068
Description
J
Datasheet
www.infineon.com
Please read the sections "Important notice" and "Warnings" at the end of this document
Revision 1.00
2023-05-19
FS100R12W2T7
EasyPACK™ module
Table of contents
Table of contents
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Potential applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Product validation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1
Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
IGBT, Inverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3
Diode, Inverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4
NTC-Thermistor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
5
Characteristics diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6
Circuit diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7
Package outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
8
Module label code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Datasheet
2
Revision 1.00
2023-05-19
FS100R12W2T7
EasyPACK™ module
1 Package
1
Package
Table 1
Insulation coordination
Parameter
Symbol Note or test condition
Isolation test voltage
VISOL
Values
Unit
2.5
kV
basic insulation (class 1, IEC 61140)
Al2O3
RMS, f = 50 Hz, t = 1 min
Internal isolation
Creepage distance
dCreep
terminal to heatsink
11.5
mm
Creepage distance
dCreep
terminal to terminal
6.3
mm
Clearance
dClear
terminal to heatsink
10.0
mm
Clearance
dClear
terminal to terminal
5.0
mm
> 200
140
°C
Values
Unit
Comparative tracking
index
CTI
Relative thermal index
(electrical)
RTI
housing
Table 2
Characteristic values
Parameter
Symbol Note or test condition
Stray inductance module
Module lead resistance,
terminals - chip
Storage temperature
LsCE
RCC'+EE'
Min.
Typ.
Max.
20
nH
TH = 25 °C, per switch
4
mΩ
Tstg
-40
125
°C
Mounting force per clamp
F
40
80
N
Weight
G
39
g
Note:
2
Table 3
The current under continuous operation is limited to 30 A rms per connector pin.
IGBT, Inverter
Maximum rated values
Parameter
Symbol Note or test condition
Unit
1200
V
100
A
80
A
Collector-emitter voltage
VCES
Implemented collector
current
ICN
Continuous DC collector
current
ICDC
Tvj max = 175 °C
Repetitive peak collector
current
ICRM
tp limited by Tvj op
200
A
Gate-emitter peak voltage
VGES
±20
V
Datasheet
Tvj = 25 °C
Values
TH = 65 °C
3
Revision 1.00
2023-05-19
FS100R12W2T7
EasyPACK™ module
2 IGBT, Inverter
Table 4
Characteristic values
Parameter
Collector-emitter
saturation voltage
Gate threshold voltage
Gate charge
Symbol Note or test condition
VCE sat
VGEth
QG
Values
Unit
Min.
Typ.
Max.
Tvj = 25 °C
1.50
1.80
Tvj = 125 °C
1.64
Tvj = 175 °C
1.72
5.15
5.80
6.45
V
VGE = ±15 V, VCC = 600 V
1.8
µC
IC = 100 A, VGE = 15 V
IC = 2.5 mA, VCE = VGE, Tvj = 25 °C
V
Internal gate resistor
RGint
Tvj = 25 °C
1.5
Ω
Input capacitance
Cies
f = 100 kHz, Tvj = 25 °C, VCE = 25 V, VGE = 0 V
21.7
nF
Reverse transfer
capacitance
Cres
f = 100 kHz, Tvj = 25 °C, VCE = 25 V, VGE = 0 V
0.075
nF
Collector-emitter cut-off
current
ICES
VCE = 1200 V, VGE = 0 V
0.009
mA
Gate-emitter leakage
current
IGES
VCE = 0 V, VGE = 20 V, Tvj = 25 °C
100
nA
Turn-on delay time
(inductive load)
tdon
IC = 100 A, VCC = 600 V,
VGE = ±15 V, RGon = 1.8 Ω
Tvj = 25 °C
0.150
µs
Tvj = 125 °C
0.166
Tvj = 175 °C
0.174
Tvj = 25 °C
0.041
Tvj = 125 °C
0.045
Tvj = 175 °C
0.047
Tvj = 25 °C
0.300
Tvj = 125 °C
0.380
Tvj = 175 °C
0.420
Tvj = 25 °C
0.100
Tvj = 125 °C
0.180
Tvj = 175 °C
0.250
Tvj = 25 °C
6
Tvj = 125 °C
8.4
Tvj = 175 °C
10.1
Tvj = 25 °C
6
Tvj = 125 °C
9.6
Tvj = 175 °C
12
Rise time (inductive load)
Turn-off delay time
(inductive load)
Fall time (inductive load)
Turn-on energy loss per
pulse
Turn-off energy loss per
pulse
tr
tdoff
tf
Eon
Eoff
IC = 100 A, VCC = 600 V,
VGE = ±15 V, RGon = 1.8 Ω
IC = 100 A, VCC = 600 V,
VGE = ±15 V, RGoff = 1.8 Ω
IC = 100 A, VCC = 600 V,
VGE = ±15 V, RGoff = 1.8 Ω
IC = 100 A, VCC = 600 V,
Lσ = 35 nH, VGE = ±15 V,
RGon = 1.8 Ω, di/dt =
1700 A/µs (Tvj = 175 °C)
IC = 100 A, VCC = 600 V,
Lσ = 35 nH, VGE = ±15 V,
RGoff = 1.8 Ω, dv/dt =
2850 V/µs (Tvj = 175 °C)
Tvj = 25 °C
µs
µs
µs
mJ
mJ
(table continues...)
Datasheet
4
Revision 1.00
2023-05-19
FS100R12W2T7
EasyPACK™ module
3 Diode, Inverter
Table 4
(continued) Characteristic values
Parameter
Symbol Note or test condition
SC data
ISC
VGE ≤ 15 V, VCC = 800 V,
VCEmax=VCES-LsCE*di/dt
Values
Min.
Typ.
Max.
tP ≤ 8 µs,
Tvj=150 °C
370
tP ≤ 7 µs,
Tvj=175 °C
350
0.700
K/W
-40
175
°C
Thermal resistance,
junction to heat sink
RthJH
per IGBT, λgrease = 1 W/(m·K)
Temperature under
switching conditions
Tvj op
Note:
3
Unit
A
Tvj op > 150°C is allowed for operation at overload conditions. For detailed specifications, please refer to AN
2018-14.
Diode, Inverter
Table 5
Maximum rated values
Parameter
Symbol Note or test condition
Unit
1200
V
Repetitive peak reverse
voltage
VRRM
Continuous DC forward
current
IF
100
A
Repetitive peak forward
current
IFRM
tP = 1 ms
200
A
Tvj = 125 °C
970
A²s
Tvj = 175 °C
860
I2t - value
Table 6
I2t
Tvj = 25 °C
Values
tP = 10 ms, VR = 0 V
Characteristic values
Parameter
Forward voltage
Peak reverse recovery
current
Symbol Note or test condition
VF
IRM
IF = 100 A, VGE = 0 V
VCC = 600 V, IF = 100 A,
VGE = -15 V, -diF/dt =
1700 A/µs (Tvj = 175 °C)
Values
Unit
Min.
Typ.
Max.
Tvj = 25 °C
1.72
2.10
Tvj = 125 °C
1.59
Tvj = 175 °C
1.52
Tvj = 25 °C
60
Tvj = 125 °C
79
Tvj = 175 °C
91
V
A
(table continues...)
Datasheet
5
Revision 1.00
2023-05-19
FS100R12W2T7
EasyPACK™ module
4 NTC-Thermistor
Table 6
(continued) Characteristic values
Parameter
Symbol Note or test condition
Recovered charge
Qr
Reverse recovery energy
Erec
Values
Typ.
Max.
Tvj = 25 °C
7.1
Tvj = 125 °C
12.7
Tvj = 175 °C
17.3
VCC = 600 V, IF = 100 A,
VGE = -15 V, -diF/dt =
1700 A/µs (Tvj = 175 °C)
Tvj = 25 °C
2.4
Tvj = 125 °C
3.9
Tvj = 175 °C
5.6
0.966
K/W
-40
175
°C
RthJH
per diode, λgrease = 1 W/(m·K)
Temperature under
switching conditions
Tvj op
4
Min.
VCC = 600 V, IF = 100 A,
VGE = -15 V, -diF/dt =
1700 A/µs (Tvj = 175 °C)
Thermal resistance,
junction to heat sink
Note:
Unit
µC
mJ
Tvj op > 150°C is allowed for operation at overload conditions. For detailed specifications, please refer to AN
2018-14.
NTC-Thermistor
Table 7
Characteristic values
Parameter
Symbol Note or test condition
Rated resistance
Unit
Min.
Typ.
Max.
5
kΩ
-5
5
%
Power dissipation
ΔR/R
TNTC = 25 °C
TNTC = 25 °C
20
mW
B-value
B25/50
R2 = R25 exp[B25/50(1/T2-1/(298,15 K))]
3375
K
B-value
B25/80
R2 = R25 exp[B25/80(1/T2-1/(298,15 K))]
3411
K
B-value
B25/100
R2 = R25 exp[B25/100(1/T2-1/(298,15 K))]
3433
K
Deviation of R100
Note:
Datasheet
R25
Values
P25
TNTC = 100 °C, R100 = 493 Ω
Specification according to the valid application note.
6
Revision 1.00
2023-05-19
FS100R12W2T7
EasyPACK™ module
5 Characteristics diagrams
5
Characteristics diagrams
Output characteristic (typical), IGBT, Inverter
IC = f(VCE)
VGE = 15 V
Output characteristic field (typical), IGBT, Inverter
IC = f(VCE)
Tvj = 175 °C
200
200
175
175
150
150
125
125
100
100
75
75
50
50
25
25
0
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
0.0
Transfer characteristic (typical), IGBT, Inverter
IC = f(VGE)
VCE = 20 V
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
Gate charge characteristic (typical), IGBT, Inverter
VGE = f(QG)
IC = 100 A, Tvj = 25 °C
200
15
175
10
150
5
125
100
0
75
-5
50
-10
25
0
-15
5
Datasheet
6
7
8
9
10
11
12
13
0.0
7
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
Revision 1.00
2023-05-19
FS100R12W2T7
EasyPACK™ module
5 Characteristics diagrams
Capacity characteristic (typical), IGBT, Inverter
C = f(VCE)
f = 100 kHz, VGE = 0 V, Tvj = 25 °C
Switching times (typical), IGBT, Inverter
t = f(IC)
RGoff = 1.8 Ω, RGon = 1.8 Ω, VGE = ±15 V, VCC = 600 V, Tvj = 175
°C
1000
10
100
1
10
1
0.1
0.1
0.01
0.01
0.001
0.001
0
10
20
30
40
50
60
70
80
90
100
0
Switching times (typical), IGBT, Inverter
t = f(RG)
VGE = ±15 V, IC = 100 A, VCC = 600 V, Tvj = 175 °C
50
100
150
200
Voltage slope (typical), IGBT, Inverter
dv/dt = f(RG)
IC = 100 A, VCC = 600 V, VGE = ±15 V, Tvj = 25 °C
10
7
6
5
1
4
3
0.1
2
1
0
0.01
0
Datasheet
2
4
6
8
10
12
14
16
18
20
0
8
2
4
6
8
10
12
14
16
18
20
Revision 1.00
2023-05-19
FS100R12W2T7
EasyPACK™ module
5 Characteristics diagrams
Switching losses (typical), IGBT, Inverter
E = f(IC)
RGoff = 1.8 Ω, RGon = 1.8 Ω, VGE = ±15 V, VCC = 600 V
Switching losses (typical), IGBT, Inverter
E = f(RG)
VGE = ±15 V, IC = 100 A, VCC = 600 V
35
50
45
30
40
25
35
30
20
25
15
20
15
10
10
5
5
0
0
0
25
50
75
100
125
150
175
200
0
Reverse bias safe operating area (RBSOA), IGBT,
Inverter
IC = f(VCE)
RGoff = 1.8 Ω, VGE = ±15 V, Tvj = 175 °C
2
4
6
8
10
12
14
16
18
20
Transient thermal impedance, IGBT, Inverter
Zth = f(t)
1
250
200
150
0.1
100
50
0
0
Datasheet
200
400
600
800
1000
1200
0.01
0.001
1400
9
0.01
0.1
1
10
Revision 1.00
2023-05-19
FS100R12W2T7
EasyPACK™ module
5 Characteristics diagrams
Forward characteristic (typical), Diode, Inverter
IF = f(VF)
Switching losses (typical), Diode, Inverter
Erec = f(IF)
RGon = 1.8 Ω, VCC = 600 V
200
8
175
7
150
6
125
5
100
4
75
3
50
2
25
1
0
0.00
0
0.50
1.00
1.50
2.00
2.50
0
Switching losses (typical), Diode, Inverter
Erec = f(RG)
IF = 100 A, VCC = 600 V
25
50
75
100
125
150
175
200
Transient thermal impedance, Diode, Inverter
Zth = f(t)
10
7
6
5
1
4
3
0.1
2
1
0
0
Datasheet
2
4
6
8
10
12
14
16
18
0.01
0.001
20
10
0.01
0.1
1
10
Revision 1.00
2023-05-19
FS100R12W2T7
EasyPACK™ module
5 Characteristics diagrams
Temperature characteristic (typical), NTC-Thermistor
R = f(TNTC)
100000
10000
1000
100
10
0
Datasheet
25
50
75
100
125
150
175
11
Revision 1.00
2023-05-19
FS100R12W2T7
EasyPACK™ module
6 Circuit diagram
6
Circuit diagram
J
Figure 1
Datasheet
12
Revision 1.00
2023-05-19
FS100R12W2T7
EasyPACK™ module
7 Package outlines
7
Package outlines
In fin e o n
Figure 2
Datasheet
13
Revision 1.00
2023-05-19
FS100R12W2T7
EasyPACK™ module
8 Module label code
8
Module label code
Module label code
Code format
Data Matrix
Barcode Code128
Encoding
ASCII text
Code Set A
Symbol size
16x16
23 digits
Standard
IEC24720 and IEC16022
IEC8859-1
Code content
Content
Module serial number
Module material number
Production order number
Date code (production year)
Date code (production week)
Digit
1–5
6 - 11
12 - 19
20 – 21
22 – 23
Example
71549
142846
55054991
15
30
Example
71549142846550549911530
71549142846550549911530
Figure 3
2
Datasheet
14
Revision 1.00
2023-05-19
FS100R12W2T7
EasyPACK™ module
Revision history
Revision history
Document revision
Date of release
Description of changes
V2.0
2019-08-12
Preliminary datasheet
n/a
2020-09-01
Datasheet migrated to a new system with a new layout and new revision
number schema: target or preliminary datasheet = 0.xy; final datasheet =
1.xy
1.00
2023-05-19
Final datasheet
Datasheet
15
Revision 1.00
2023-05-19
Trademarks
All referenced product or service names and trademarks are the property of their respective owners.
Edition 2023-05-19
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2023 Infineon Technologies AG
All Rights Reserved.
Do you have a question about any
aspect of this document?
Email: erratum@infineon.com
Document reference
IFX-AAY219-002
Important notice
The information given in this document shall in no
event be regarded as a guarantee of conditions or
characteristics (“Beschaffenheitsgarantie”).
With respect to any examples, hints or any typical
values stated herein and/or any information regarding
the application of the product, Infineon Technologies
hereby disclaims any and all warranties and liabilities
of any kind, including without limitation warranties of
non-infringement of intellectual property rights of any
third party.
In addition, any information given in this document is
subject to customer’s compliance with its obligations
stated in this document and any applicable legal
requirements, norms and standards concerning
customer’s products and any use of the product of
Infineon Technologies in customer’s applications.
The data contained in this document is exclusively
intended for technically trained staff. It is the
responsibility of customer’s technical departments to
evaluate the suitability of the product for the intended
application and the completeness of the product
information given in this document with respect to such
application.
Warnings
Due to technical requirements products may contain
dangerous substances. For information on the types
in question please contact your nearest Infineon
Technologies office.
Except as otherwise explicitly approved by Infineon
Technologies in a written document signed by
authorized representatives of Infineon Technologies,
Infineon Technologies’ products may not be used in
any applications where a failure of the product or
any consequences of the use thereof can reasonably
be expected to result in personal injury.