Diod e
Silicon Carbide Schottky Diode
IDH02G120C5
5th Generation CoolSiC™ 1200 V SiC Schottky Diode
Final Da ta sheet
Rev. 2.2 2021-03-01
Indust rial Po wer C o ntrol
IDH02G120C5
5th Generation CoolSiC™ 1200 V SiC Schottky Diode
CoolSiCTM SiC Schottky Diode
Features:
Revolutionary semiconductor material - Silicon Carbide
No reverse recovery current / No forward recovery
Temperature independent switching behavior
Low forward voltage even at high operating temperature
Tight forward voltage distribution
Excellent thermal performance
Extended surge current capability
Specified dv/dt ruggedness
Qualified according to JEDEC1) for target applications
Pb-free lead plating; RoHS compliant
Benefits
System efficiency improvement over Si diodes
Enabling higher frequency / increased power density solutions
System size / cost savings due to reduced heatsink requirements and smaller magnetics
Reduced EMI
Highest efficiency across the entire load range
Robust diode operation during surge events
High reliability
RelatedLinks: www.infineon.com/sic
Applications
Solar inverters
Uninterruptable power supplies
Motor drives
Power Factor Correction
Package pin definitions
Pin 1 and backside – cathode
Pin 2 – anode
Key Performance and Package Parameters
Type
IDH02G120C5
VDC
IF
QC
Tj,max
Marking
Package
1200V
2A
14nC
175°C
D0212C5
PG-TO220-2-1
1) J-STD20 and JESD22
Final Data Sheet
2
Rev. 2.2, 2021-03-01
IDH02G120C5
5th Generation CoolSiC™ 1200 V SiC Schottky Diode
Table of Contents
Description .................................................................................................................................................. 2
Table of Contents ........................................................................................................................................ 3
Maximum Ratings ....................................................................................................................................... 4
Thermal Resistances .................................................................................................................................. 4
Electrical Characterics ................................................................................................................................ 5
Electrical Characteristics Diagram .............................................................................................................. 6
Package Drawings ...................................................................................................................................... 9
Revision History ........................................................................................................................................ 10
Disclaimer ................................................................................................................................................. 11
Final Data Sheet
3
Rev. 2.2, 2021-03-01
IDH02G120C5
5th Generation CoolSiC™ 1200 V SiC Schottky Diode
Maximum ratings
Parameter
Symbol
Value
Unit
Repetitive peak reverse voltage
VRRM
1200
V
Continues forward current for Rth(j-c,max)
TC = 168°C, D=1
TC = 135°C, D=1
TC = 25°C, D=1
Surge non-repetitive forward current,
sine halfwave
TC=25°C, tp=10ms
TC=150°C, tp=10ms
Non-repetitive peak forward current
TC = 25°C, tp=10 µs
i²t value
TC = 25°C, tp=10 ms
TC = 150°C, tp=10 ms
Diode dv/dt ruggedness
VR=0…960V
Power dissipation
TC = 25°C
2
5.7
11.8
IF
IF,SM
Soldering temperature,
wavesoldering only allowed at leads,
1.6mm (0.063 in.) from case for 10 s
Mounting torque
M3 and M4 screws
A
37
31
IF,max
344
A
∫ i²dt
7
4.9
A²s
dv/dt
150
V/ns
Ptot
75
W
-55…175
°C
Tsold
260
°C
M
0.7
Nm
Tj;Tstg
Operating and storage temperature
A
Thermal Resistances
Parameter
Value
Symbol Conditions
Unit
min.
typ.
max.
-
1.54
2
K/W
-
-
62
K/W
Characteristic
Diode thermal resistance,
junction – case
Thermal resistance,
junction – ambient
Final Data Sheet
Rth(j-c)
Rth(j-a)
leaded
4
Rev. 2.2, 2021-03-01
IDH02G120C5
5th Generation CoolSiC™ 1200 V SiC Schottky Diode
Electrical Characterics
Static Characteristics, at Tj=25°C, unless otherwise specified
Parameter
Value
Symbol Conditions
min.
typ.
max.
1200
-
1.4
1.7
1.2
6
1.65
2.3
18
90
Unit
Static Characteristic
DC blocking voltage
VDC
Diode forward voltage
VF
Reverse current
IR
Tj = 25°C
IF= 2A, Tj=25°C
IF= 2A, Tj=150°C
VR=1200V, Tj=25°C
VR=1200V, Tj=150°C
V
V
µA
Dynamic Characteristics, at Tj=25°C, unless otherwise specified
Parameter
Value
Symbol Conditions
Unit
min.
typ.
max.
-
14
-
nC
-
182
13
10
-
pF
Dynamic Characteristics
VR=800V, Tj=150°C
Total capacitive charge
QC
VR
QC C (V )dV
0
Total Capacitance
Final Data Sheet
C
VR=1 V, f=1 MHz
VR=400 V, f=1 MHz
VR=800 V, f=1 MHz
5
Rev. 2.2, 2021-03-01
IDH02G120C5
5th Generation CoolSiC™ 1200 V SiC Schottky Diode
Electrical Characteristics Diagram
Figure 1. Power dissipation as a function
of case temperature, Ptot=f(TC),
Rth(j-c),max
Figure 2. Diode forward current as function
of temperature, Tj≤175°C,
Rth(j-c),max, parameter D=duty cycle,
Vth, Rdiff @ Tj=175°C
Figure 3. Typical forward characteristics,
IF=f(VF), tp= 10 µs, parameter: Tj
Figure 4. Typical forward characteristics in surge
current, IF=f(VF), tp= 10 µs,
parameter: Tj
Final Data Sheet
6
Rev. 2.2, 2021-03-01
IDH02G120C5
5th Generation CoolSiC™ 1200 V SiC Schottky Diode
Figure 5. Typical capacitive charge as function
of current slope1, QC=f(dIF/dt), Tj=150°C
Figure 6. Typical reverse current as function
of reverse voltage, IR=f(VR), parameter: Tj
1) Only capacitive charge, guaranteed by design.
Figure 7. Max. transient thermal impedance,
Zth,jc=f(tP), parameter: D=tP/T
Final Data Sheet
Figure 8. Typical capacitance as function of
reverse voltage, C=f(VR); Tj=25°C; f=1 MHz
7
Rev. 2.2, 2021-03-01
IDH02G120C5
5th Generation CoolSiC™ 1200 V SiC Schottky Diode
Figure 9. Typical capacitively stored energy as
function of reverse voltage,
VR
EC C (V )VdV
0
Final Data Sheet
8
Rev. 2.2, 2021-03-01
IDH02G120C5
5th Generation CoolSiC™ 1200 V SiC Schottky Diode
Package Drawings
Final Data Sheet
9
Rev. 2.2, 2021-03-01
IDH02G120C5
5th Generation CoolSiC™ 1200 V SiC Schottky Diode
Revision History
IIDH02G120C5
Revision:2021-03-01, Rev. 2.2
Previous Revision:
Revision
Date
Subjects (major changes since last version)
2.0
2015-07-22 Final data sheet
2.1
2017-07-21 Editorial change
2.2
2021-03-01 Increased dv/dt ruggedness
Disclaimer
We Listen to Your Comments
Any information within this document that you feel is wrong, unclear or missing at all?
Your feedback will help us to continuously improve the quality of this document.
Please send your proposal (including a reference to this document) to: erratum@infineon.com
Final Data Sheet
10
Rev. 2.2, 2021-03-01
IDH02G120C5
5th Generation CoolSiC™ 1200 V SiC Schottky Diode
Published by
Infineon Technologies AG
81726 München, Germany
© Infineon Technologies AG 2021.
All Rights Reserved.
IMPORTANT NOTICE
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics (“Beschaffenheitsgarantie”). With respect to any examples, hints or any typical values stated
herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims
any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of
intellectual property rights of any third party.
In addition, any information given in this document is subject to customer’s compliance with its obligations
stated in this document and any applicable legal requirements, norms and standards concerning customer’s
products and any use of the product of Infineon Technologies in customer’s applications.
The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of
customer’s technical departments to evaluate the suitability of the product for the intended application and the
completeness of the product information given in this document with respect to such application.
For further information on the product, technology, delivery terms and conditions and prices please contact your
nearest Infineon Technologies office (www.infineon.com).
Please note that this product is not qualified according to the AEC Q100 or AEC Q101 documents of the
Automotive Electronics Council.
WARNINGS
Due to technical requirements products may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies office.
Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized
representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications
where a failure of the product or any consequences of the use thereof can reasonably be expected to result in
personal injury.
Final Data Sheet
11
Rev. 2.2, 2021-03-01