IDH20G65C6XKSA1

IDH20G65C6 6 th Generation CoolSiC™ 650V SiC Schottky Diode The CoolSiC™ generation 6 (G6) is the leading edge technology from Infineon for the SiC Schottky barrier diodes. The Infineon proprietary innovative G5 technology was enhanced in G6 by introducing further advancements like a novel Schottky metal system. The result is a family of products with improved efficiency over all load conditions, resulting from a lower figure of merit (Qc x VF). The CoolSiC™ Schottky diode 650 V G6 has been designed to complement our 600 V and 650 V CoolMOS™ 7 families, meeting the most stringent application requirements in this voltage range. Table 1 Parameter Value Unit VRRM 650 V QC (VR = 400 V) 26.8 nC EC (VR = 400 V) 5.3 µJ IF (TC ≤ 135 °C, D = 1) 20 A VF (IF = 20 A, Tj = 25 °C) 1.25 V Table 2 PG-TO220-2 Key performance parameters CASE 1 2 1) Cathode 2) Anode Package information Type / ordering Code Package Marking IDH20G65C6 PG-TO220-2 D2065C6 Features Best in class forward voltage (1.25 V)  Best in class figure of merit (Qc x VF)  High dv/dt ruggedness (150 V/ns)  Benefits System efficiency improvement  System cost and size savings due to the reduced cooling requirements  Enabling higher frequency and increased power density  Potential Applications Power factor correction in SMPS  Solar inverter  Uninterruptible power supply  Product Validation  Qualified for industrial applications according to the relevant tests of JEDEC (J-STD20 and JESD22) Final Datasheet Please read the Important Notice and Warnings at the end of this document Rev. 2.0, 2017-05-23 6th Generation CoolSiCTM IDH20G65C6 Table of Content 1 Maximum ratings ............................................................................................................................... 3 2 Thermal characteristics ..................................................................................................................... 3 3 3.1 3.2 Electrical characteristics .................................................................................................................... 4 Static characteristics ............................................................................................................................... 4 AC characteristics .................................................................................................................................... 4 4 Diagrams ............................................................................................................................................ 5 5 Simplified forward characteristic ....................................................................................................... 7 6 Package outlines ................................................................................................................................ 8 Final Datasheet 2 Rev. 2.0, 2017-05-23 6th Generation CoolSiCTM IDH20G65C6 1 Maximum ratings Table 3 Maximum ratings Parameter Symbol Continuous forward current IF Values Unit Note/Test condition Min. Typ. Max. – – 20 TC ≤ 135 °C, D = 1 – – 22 TC ≤ 125 °C, D = 1 – – 41 TC ≤ 25 °C, D = 1 – – 87 – – 99 TC = 25 °C, tp = 10 ms – – 79 TC = 150 °C, tp = 10 ms – – 780 TC = 25 °C, tp = 10 µs – – 49 – – 31 Surge-repetitive forward current, sine halfwave1 IF,RM Surge non-repetitive forward current, sine halfwave IF,SM Non-repetitive peak forward current IF,max i²t value ∫ i²dt Repetitive peak reverse voltage VRRM – – 650 V TC = 25 °C Diode dv/dt ruggedness dv/dt – – 150 V/ns VR = 0..480 V Power dissipation Ptot – – 108 W TC = 25°C, RthJC,max Operating and storage temperature Tj Tstg -55 – 175 °C – Mounting torque – – – 70 Ncm M3 screw Unit Note/Test condition 2 Table 4 A A²s TC = 25 °C, tp = 10 ms TC = 25 °C, tp = 10 ms TC = 150 °C, tp = 10 ms Thermal characteristics Thermal characteristics (PG-TO-220-2) Values Parameter Symbol Thermal resistance, junctioncase RthJC Thermal resistance, junctionambient RthJA – – 62 Soldering temperature, wavesoldering only allowed at leads Tsold – – 260 Min. Typ. Max. – 0.8 1.3 – K/W leaded °C 1.6 mm (0.063 in.) from case for 10 s The surge-repetitive forward current test was performed with 1000 pulses (half-wave rectified sine with the 10 ms period). Final Datasheet 3 Rev. 2.0, 2017-05-23 1 6th Generation CoolSiCTM IDH20G65C6 3 Electrical characteristics 3.1 Table 5 Static characteristics Static characteristics Parameter Symbol DC blocking voltage VDC Diode forward voltage VF Reverse current 3.2 Table 6 IR Unit Note/Test condition Min. Typ. Max. 650 – – – 1.25 1.35 – 1.5 – IF = 20 A, Tj = 150 °C – 2.0 67 VR = 420 V, Tj = 25 °C – 66 – – 153 – Tj = 25 °C V µA IF = 20 A, Tj = 25 °C VR = 420 V, Tj = 125 °C VR = 420 V, Tj = 150 °C AC characteristics AC characteristics Parameter Symbol Total capacitive charge Qc Total capacitance Final Datasheet Values C Values Min. Typ. Max. – 26.8 – – 970 – – 57 – – 55 – 4 Unit Note/Test Condition nC VR = 400 V, Tj = 150 °C, di/dt = 200 A/µs, IF ≤ IF,MAX VR = 1 V, f = 1 MHz, Tj = 25 °C pF VR = 300 V, f = 1 MHz, Tj = 25 °C VR = 600 V, f = 1 MHz, Tj = 25 °C Rev. 2.0, 2017-05-23 6th Generation CoolSiCTM IDH20G65C6 4 Diagrams Ptot = f(TC) Figure 1 Power dissipation IF = f(TC); RthJC,max ; Tj ≤ 175 °C; parameter: D = tP/T Figure 2 IF = f(VF); tp = 10 µs; parameter: Tj Figure 3 Typ. forward characteristics Final Datasheet Max. forward current IF = f(VF); tp = 10 µs; parameter: Tj Figure 4 5 Typ. forward characteristics in surge current Rev. 2.0, 2017-05-23 6th Generation CoolSiCTM IDH20G65C6 QC = f(diF/dt); Tj = 150 °C; VR = 400 V; IF ≤ IF,max Figure 5 Typ. cap. charge vs. current slope IR = f(VR); parameter: Tj Figure 6 Zth,jc = f(tP); parameter: D = tP/T Figure 7 Max. transient thermal impedance Final Datasheet Typ. reverse current vs. reverse voltage C = f(VR); Tj = 25 °C; f = 1 MHz Figure 8 6 Typ. capacitance vs. reverse voltage Rev. 2.0, 2017-05-23 6th Generation CoolSiCTM IDH20G65C6 EC = f(VR) Figure 9 Typ. capacitance stored energy 5 Simplified forward characteristic VF  VTH  RDIFF  I F Treshold voltage (VTH): VTH T j   0.001  T j  0.766 V Differential resistance (RDIFF): 2 RDIFF T j   A  T j  B  T j  C  A  6.19  10-7 DIFF B  4.50  10 -5 TH C  2.38  10-2 VF = f(IF) Figure 10 Tj [°C]; -55 °C ≤ Tj ≤ 175 °C; IF ≤ 20 A Equivalent forward current curve Final Datasheet Figure 11 7 Mathematical Equation Rev. 2.0, 2017-05-23 6th Generation CoolSiCTM IDH20G65C6 6 Package outlines Figure 12 Outlines of the package PG-TO220-2, dimensions in mm/inches Final Datasheet 8 Rev. 2.0, 2017-05-23 6th Generation CoolSiCTM IDH20G65C6 Revision History Major changes since the last revision Revision Date Subject (major changes since last revision) 2.0 2017-05-23 Release of final version Final Datasheet 9 Rev. 2.0, 2017-05-23 Other Trademarks All referenced product or service names and trademarks are the property of their respective owners. Edition 2017-05-23 Published by Infineon Technologies AG 81726 München, Germany owners. © 2017 Infineon Technologies AG. All Rights Reserved. Do you have a question about this document? Email: erratum@infineon.com Document reference IMPORTANT NOTICE The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Infineon Technologies in customer’s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. For further information on the product, technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies office (www.infineon.com). WARNINGS Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.