IPB80N04S3-03

IPB80N04S3-03 IPI80N04S3-03, IPP80N04S3-03 OptiMOS®-T Power-Transistor Product Summary V DS 40 V R DS(on),max (SMD version) 3.2 mΩ ID 80 A Features • N-channel - Enhancement mode PG-TO263-3-2 • Automotive AEC Q101 qualified PG-TO262-3-1 PG-TO220-3-1 • MSL1 up to 260°C peak reflow • 175°C operating temperature • Green package (RoHS compliant) • Ultra low Rds(on) • 100% Avalanche tested Type Package Marking IPB80N04S3-03 PG-TO263-3-2 3N0403 IPI80N04S3-03 PG-TO262-3-1 3N0403 IPP80N04S3-03 PG-TO220-3-1 3N0403 Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Symbol Continuous drain current1) ID Conditions T C=25 °C, V GS=10 V T C=100 °C, V GS=10 V2) Value 80 Unit A 80 Pulsed drain current2) I D,pulse T C=25 °C 320 Avalanche energy, single pulse E AS I D=80 A 526 mJ Gate source voltage V GS ±20 V Power dissipation P tot 188 W Operating and storage temperature T j, T stg -55 ... +175 °C T C=25 °C IEC climatic category; DIN IEC 68-1 Rev. 1.0 55/175/56 page 1 2007-05-03 IPB80N04S3-03 IPI80N04S3-03, IPP80N04S3-03 Parameter Symbol Values Conditions Unit min. typ. max. Thermal characteristics2) Thermal resistance, junction - case R thJC - - 0.8 Thermal resistance, junction ambient, leaded R thJA - - 62 SMD version, device on PCB R thJA minimal footprint - - 62 6 cm2 cooling area3) - - 40 K/W Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage V (BR)DSS V GS=0 V, I D= 1 mA 40 - - Gate threshold voltage V GS(th) V DS=V GS, I D=120 µA 2.1 3.0 4.0 Zero gate voltage drain current I DSS V DS=40 V, V GS=0 V, T j=25 °C - - 1 - - 100 V DS=40 V, V GS=0 V, T j=125 °C2) V µA Gate-source leakage current I GSS V GS=20 V, V DS=0 V - - 100 nA Drain-source on-state resistance RDS(on) V GS=10 V, I D=80 A - 2.8 3.5 mΩ V GS=10 V, I D=80 A, SMD version - 2.5 3.2 Rev. 1.0 page 2 2007-05-03 IPB80N04S3-03 IPI80N04S3-03, IPP80N04S3-03 Parameter Symbol Values Conditions Unit min. typ. max. - 5600 7300 - 1540 2000 Dynamic characteristics2) Input capacitance C iss Output capacitance C oss Reverse transfer capacitance Crss - 240 350 Turn-on delay time t d(on) - 25 - Rise time tr - 17 - Turn-off delay time t d(off) - 39 - Fall time tf - 14 - Gate to source charge Q gs - 30 40 Gate to drain charge Q gd - 20 35 Gate charge total Qg - 83 110 Gate plateau voltage V plateau - 5.4 - V - - 80 A - - 320 V GS=0 V, V DS=25 V, f =1 MHz V DD=20 V, V GS=10 V, I D=80 A, R G=3.5 Ω pF ns Gate Charge Characteristics2) V DD=32 V, I D=80 A, V GS=0 to 10 V nC Reverse Diode Diode continous forward current2) IS Diode pulse current2) I S,pulse Diode forward voltage V SD V GS=0 V, I F=80 A, T j=25 °C - 1 1.3 V Reverse recovery time2) t rr V R=20 V, I F=I S, di F/dt =100 A/µs - 46 - ns Reverse recovery charge2) Q rr - 73 - nC T C=25 °C 1) Current is limited by bondwire; with an R thJC = 0.8K/W the chip is able to carry 182A at 25°C. For detailed information see Application Note ANPS071E at www.infineon.com/optimos 2) Defined by design. Not subject to production test. 3) Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm 2 (one layer, 70 µm thick) copper area for drain connection. PCB is vertical in still air. Rev. 1.0 page 3 2007-05-03 IPB80N04S3-03 IPI80N04S3-03, IPP80N04S3-03 1 Power dissipation 2 Drain current P tot = f(T C); V GS ≥ 6 V I D = f(T C); V GS ≥ 6 V 100 200 180 80 160 140 60 I D [A] P tot [W] 120 100 80 40 60 40 20 20 0 0 0 50 100 150 0 200 50 100 T C [°C] 150 200 T C [°C] 3 Safe operating area 4 Max. transient thermal impedance I D = f(V DS); T C = 25 °C; D = 0; SMD Z thJC = f(t p) parameter: t p parameter: D =t p/T 1000 101 1 µs 10 µs 100 100 µs 0.5 100 I D [A] Z thJC [K/W] 1 ms 10-1 0.1 0.05 10 0.01 10-2 single pulse 10-3 1 0.1 1 10 100 10-5 10-4 10-3 10-2 10-1 100 t p [s] V DS [V] Rev. 1.0 10-6 page 4 2007-05-03 IPB80N04S3-03 IPI80N04S3-03, IPP80N04S3-03 5 Typ. output characteristics 6 Typ. drain-source on-state resistance I D = f(V DS); T j = 25 °C; SMD R DS(on) = f(I D); T j = 25 °C; SMD parameter: V GS parameter: V GS 20 320 10 V 7V 5V 5.5 V 6V 6.5 V 18 280 16 240 6.5 V 14 160 R DS(on) [mΩ] I D [A] 200 6V 120 12 10 7V 8 5.5 V 80 6 40 5V 4 10 V 2 0 0 2 4 6 0 8 80 160 240 320 I D [A] V DS [V] 7 Typ. transfer characteristics 8 Typ. drain-source on-state resistance I D = f(V GS); V DS = 6V R DS(on) = f(T j); I D = 80 A; V GS = 10 V; SMD parameter: T j 320 5 -55 °C 280 25 °C 240 4 175 °C R DS(on) [mΩ] I D [A] 200 160 120 80 3 2 40 0 2 3 4 5 6 7 8 V GS [V] Rev. 1.0 1 -60 -20 20 60 100 140 180 T j [°C] page 5 2007-05-03 IPB80N04S3-03 IPI80N04S3-03, IPP80N04S3-03 9 Typ. gate threshold voltage 10 Typ. capacitances V GS(th) = f(T j); V GS = V DS C = f(V DS); V GS = 0 V; f = 1 MHz parameter: I D 104 4 Ciss 3.5 V GS(th) [V] C [pF] 1200 µA 3 120 µA Coss 103 2.5 2 Crss 1.5 102 1 -60 -20 20 60 100 140 0 180 5 10 15 20 25 30 V DS [V] T j [°C] 11 Typical forward diode characteristicis 12 Typ. avalanche characteristics IF = f(VSD) I A S= f(t AV) parameter: T j parameter: T j(start) 100 103 150 °C 100 °C 25 °C I F [A] I AV [A] 102 175 °C 101 25 °C 100 1 0 0.2 0.4 0.6 0.8 1 1.2 1.4 V SD [V] Rev. 1.0 10 1 10 100 1000 t AV [µs] page 6 2007-05-03 IPB80N04S3-03 IPI80N04S3-03, IPP80N04S3-03 13 Typical avalanche energy 14 Typ. drain-source breakdown voltage E AS = f(T j) V BR(DSS) = f(T j); I D = 1 mA parameter: I D 2500 55 2000 50 20 A V BR(DSS) [V] E AS [mJ] 1500 1000 45 40 40 A 500 35 80 A 30 0 25 75 125 -60 175 -20 T j [°C] 20 60 100 140 180 T j [°C] 15 Typ. gate charge 16 Gate charge waveforms V GS = f(Q gate); I D = 80 A pulsed parameter: V DD 12 V GS 8V 10 Qg 32 V V GS [V] 8 6 V g s(th) 4 2 Q g (th) Q sw Q gs 0 0 20 40 60 80 Q gate Q gd 100 Q gate [nC] Rev. 1.0 page 7 2007-05-03 IPB80N04S3-03 IPI80N04S3-03, IPP80N04S3-03 Published by Infineon Technologies AG 81726 Munich, Germany © Infineon Technologies AG 2007 All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non‑infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev. 1.0 page 8 2007-05-03 IPB80N04S3-03 IPI80N04S3-03, IPP80N04S3-03 Revision History Version Rev. 1.0 Date Changes page 9 2007-05-03