IPC100N04S5L-1R9

IPC100N04S5L-1R9 OptiMOS™-5 Power-Transistor Product Summary VDS 40 V RDS(on),max 1.9 mW ID 100 A Features • OptiMOS™ - power MOSFET for automotive applications PG-TDSON-8-34 • N-channel - Enhancement mode - Logic Level • AEC Q101 qualified • MSL1 up to 260°C peak reflow 1 • 175°C operating temperature 1 • Green Product (RoHS compliant) • 100% Avalanche tested Type Package Marking IPC100N04S5L-1R9 PG-TDSON-8-34 5N04L1R9 Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Symbol Continuous drain current1) ID Conditions Value T C=25°C, V GS=10V 100 T C=100°C, V GS=10V2) 100 Unit A Pulsed drain current2) I D,pulse T C=25°C 400 Avalanche energy, single pulse2) E AS I D=50A 130 mJ Avalanche current, single pulse I AS - 100 A Gate source voltage V GS - ±16 V Power dissipation P tot T C=25°C 100 W Operating and storage temperature T j, T stg - -55 ... +175 °C Rev. 1.3 page 1 2017-08-03 IPC100N04S5L-1R9 Parameter Symbol Values Conditions Unit min. typ. max. Thermal characteristics2) Thermal resistance, junction - case R thJC - - - 1.5 Thermal resistance, junction ambient R thJA 6 cm2 cooling area3) - - 50 K/W Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage V (BR)DSS V GS=0V, I D= 1mA 40 - - Gate threshold voltage V GS(th) V DS=V GS, I D=50µA 1.2 1.6 2.0 Zero gate voltage drain current I DSS V DS=40V, V GS=0V, T j=25°C - - 1 T j=125°C2) - - 100 V DS=40V, V GS=0V, V µA Gate-source leakage current I GSS V GS=16V, V DS=0V - - 100 nA Drain-source on-state resistance R DS(on) V GS=4.5V, I D=50A - 1.8 2.5 mW V GS=10V, I D=50A - 1.4 1.9 Rev. 1.3 page 2 2017-08-03 IPC100N04S5L-1R9 Parameter Symbol Values Conditions Unit min. typ. max. - 3240 4310 - 730 970 Dynamic characteristics2) Input capacitance C iss Output capacitance C oss Reverse transfer capacitance Crss - 48 72 Turn-on delay time t d(on) - 5 - Rise time tr - 5 - Turn-off delay time t d(off) - 29 - Fall time tf - 22 - Gate to source charge Q gs - 9 12 Gate to drain charge Q gd - 13 19 Gate charge total Qg - 61 81 Gate plateau voltage V plateau - 2.7 - V - - 100 A - - 400 V GS=0V, V DS=25V, f =1MHz V DD=20V, V GS=10V, I D=100A, R G=3.5W pF ns Gate Charge Characteristics2) V DD=32V, I D=100A, V GS=0 to 10V nC Reverse Diode Diode continous forward current2) IS Diode pulse current2) I S,pulse Diode forward voltage V SD V GS=0V, I F=50A, T j=25°C - 0.8 1.1 V Reverse recovery time2) t rr V R=20V, I F=50A, di F/dt =100A/µs - 51 - ns Reverse recovery charge2) Q rr - 54 - nC T C=25°C 1) Current is limited by package; with an R thJC = 1.5 K/W the chip is able to carry 160A at 25°C. 2) The parameter is not subject to production test- verified by design/characterization. 3) Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm 2 (one layer, 70 µm thick) copper area for drain connection. PCB is vertical in still air. Rev. 1.3 page 3 2017-08-03 IPC100N04S5L-1R9 2 Drain current P tot = f(T C); V GS = 10 V I D = f(T C); V GS = 10 V 120 120 100 100 80 80 ID [A] Ptot [W] 1 Power dissipation 60 60 40 40 20 20 0 0 0 50 100 150 200 0 50 100 TC [°C] 150 200 TC [°C] 3 Safe operating area 4 Max. transient thermal impedance I D = f(V DS); T C = 25 °C; D = 0 Z thJC = f(t p) parameter: t p parameter: D =t p/T 1000 101 1 µs 10 µs 100 0.5 ZthJC [K/W] 100 ID [A] 100 µs 0.1 10-1 0.05 150 µs 10 single pulse -2 10 0.01 1 10-3 0.1 1 10 100 VDS [V] Rev. 1.3 10-6 10-5 10-4 10-3 10-2 10-1 100 tp [s] page 4 2017-08-03 IPC100N04S5L-1R9 5 Typ. output characteristics 6 Typ. drain-source on-state resistance I D = f(V DS); T j = 25 °C R DS(on) = f(I D); T j = 25 °C parameter: V GS parameter: V GS 400 12 360 10 320 280 2.5 V 8 10 V 2.75 V 3.5 V RDS(on) [mW] ID [A] 240 200 160 3V 6 3V 4 120 3.5 V 2.75 V 80 2 10 V 40 2.5 V 0 0 1 2 0 3 0 50 100 150 VDS [V] 200 250 300 350 400 ID [A] 7 Typ. transfer characteristics 8 Typ. drain-source on-state resistance I D = f(V GS); V DS = 6V R DS(on) = f(T j); I D = 50 A; V GS = 10 V parameter: T j 400 3.5 350 300 2.5 RDS(on) [mW] ID [A] 250 200 150 1.5 100 175°C 50 -55°C 25°C 0 1.5 2 2.5 3 3.5 4 VGS [V] Rev. 1.3 0.5 -60 -20 20 60 100 140 180 Tj [°C] page 5 2017-08-03 IPC100N04S5L-1R9 9 Typ. gate threshold voltage 10 Typ. capacitances V GS(th) = f(T j); V GS = V DS C = f(V DS); V GS = 0 V; f = 1 MHz parameter: I D 104 2 Ciss 1.5 500 µA Coss C [pF] 50 µA VGS(th) [V] 103 1 Crss 102 0.5 101 0 -60 -20 20 60 100 140 0 180 10 20 30 VDS [V] Tj [°C] 11 Typical forward diode characteristicis 12 Avalanche characteristics IF = f(VSD) I A S= f(t AV) parameter: T j parameter: Tj(start) 103 1000 102 100 175 °C IAV [A] IF [A] 25 °C 25 °C 101 150 °C 10 100 0 0.2 0.4 0.6 0.8 1 1.2 1.4 VSD [V] Rev. 1.3 100 °C 1 1 10 100 1000 tAV [µs] page 6 2017-08-03 IPC100N04S5L-1R9 13 Avalanche energy 14 Drain-source breakdown voltage E AS = f(T j) V BR(DSS) = f(T j); I D = 1 mA 46 300 250 44 25 A VBR(DSS) [V] EAS [mJ] 200 150 50 A 42 40 100 38 100 A 50 36 0 25 75 125 -60 175 -20 Tj [°C] 20 60 100 140 180 Tj [°C] 15 Typ. gate charge 16 Gate charge waveforms V GS = f(Q gate); I D = 100 A pulsed parameter: V DD 10 V GS 9 Qg 8 8V 32 V 7 VGS [V] 6 5 V gs(th) 4 3 2 Q g(th) Q sw Q gate 1 Q gs 0 0 10 20 30 40 50 Q gd 60 Qgate [nC] Rev. 1.3 page 7 2017-08-03 IPC100N04S5L-1R9 Published by Infineon Technologies AG 81726 Munich, Germany © Infineon Technologies AG 2017 All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev. 1.3 page 8 2017-08-03 IPC100N04S5L-1R9 Revision History Version Date Changes Revision 1.0 14.03.2016 Final Data Sheet Revision 1.1 07.09.2016 Detailed package name added Revision 1.2 06.12.2016 Update the IDSS for Tj=25°C Update the Qrr and trr test 03.08.2017 condition to IF=50A Revision 1.3 Rev. 1.3 page 9 2017-08-03