IPD90N08S405ATMA1

IPD90N08S4-05 OptiMOS™-T2 Power-Transistor Product Summary VDS 80 V RDS(on),max 5.3 mW ID 90 A Features PG-TO252-3-313 • N-channel - Enhancement mode • AEC Q101 qualified • MSL1 up to 260°C peak reflow • 175°C operating temperature • Green Product (RoHS compliant) • 100% Avalanche tested Type Package Marking IPD90N08S4-05 PG-TO252-3-313 4N0805 Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Symbol Continuous drain current1) ID Conditions Value T C=25°C, V GS=10V 90 T C=100°C, V GS=10V2) 90 Unit A Pulsed drain current2) I D,pulse T C=25°C 360 Avalanche energy, single pulse2) E AS I D=45A 240 mJ Avalanche current, single pulse I AS - 75 A Gate source voltage V GS - ±20 V Power dissipation P tot T C=25°C 144 W Operating and storage temperature T j, T stg - -55 ... +175 °C Rev. 1.1 page 1 2015-09-22 IPD90N08S4-05 Parameter Symbol Values Conditions Unit min. typ. max. Thermal characteristics2) Thermal resistance, junction - case R thJC - - - 1.0 SMD version, device on PCB R thJA minimal footprint - - 62 6 cm2 cooling area3) - - 40 K/W Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage V (BR)DSS V GS=0V, I D= 1mA 80 - - Gate threshold voltage V GS(th) V DS=V GS, I D=90µA 2.0 3.0 4.0 Zero gate voltage drain current I DSS V DS=80V, V GS=0V, T j=25°C - 0.01 1 T j=125°C2) - 5 100 V DS=80V, V GS=0V, V µA Gate-source leakage current I GSS V GS=20V, V DS=0V - - 100 nA Drain-source on-state resistance R DS(on) V GS=10V, I D=90A - 4.5 5.3 mW Rev. 1.1 page 2 2015-09-22 IPD90N08S4-05 Parameter Symbol Values Conditions Unit min. typ. max. - 3600 4800 - 1400 1860 Dynamic characteristics2) Input capacitance C iss Output capacitance C oss Reverse transfer capacitance Crss - 75 150 Turn-on delay time t d(on) - 12 - Rise time tr - 7 - Turn-off delay time t d(off) - 20 - Fall time tf - 23 - Gate to source charge Q gs - 19 24 Gate to drain charge Q gd - 11 23 Gate charge total Qg - 52 68 Gate plateau voltage V plateau - 5.2 - V - - 90 A - - 360 V GS=0V, V DS=25V, f =1MHz V DD=40V, V GS=10V, I D=90A, R G=3.5W pF ns Gate Charge Characteristics2) V DD=64V, I D=90A, V GS=0 to 10V nC Reverse Diode Diode continous forward current2) IS Diode pulse current1) I S,pulse Diode forward voltage V SD V GS=0V, I F=90A, T j=25°C - 0.95 1.3 V Reverse recovery time1) t rr V R=40V, I F=50A, di F/dt =100A/µs - 93 - ns Reverse recovery charge1) Q rr - 57 - nC T C=25°C 1) Current is limited by bondwire; with an R thJC = 1K/W the chip is able to carry 120A at 25°C. 2) Specified by design. Not subject to production test. 3) Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm2 (one layer, 70 µm thick) copper area for drain connection. PCB is vertical in still air. Rev. 1.1 page 3 2015-09-22 IPD90N08S4-05 1 Power dissipation 2 Drain current P tot = f(T C); V GS ≥ 6 V I D = f(T C); V GS = 10 V 150 100 125 80 100 ID [A] Ptot [W] 60 75 40 50 20 25 0 0 0 50 100 150 200 0 50 100 TC [°C] 150 200 TC [°C] 3 Safe operating area 4 Max. transient thermal impedance I D = f(V DS); T C = 25 °C; D = 0 Z thJC = f(t p) parameter: t p parameter: D =t p/T 1000 101 1 µs 100 10 µs 100 0.5 100 µs ID [A] ZthJC [K/W] 1 ms 0.1 10-1 0.05 10 0.01 10-2 1 10-3 0.1 1 10 100 VDS [V] Rev. 1.1 single pulse 10-6 10-5 10-4 10-3 10-2 10-1 100 tp [s] page 4 2015-09-22 IPD90N08S4-05 5 Typ. output characteristics 6 Typ. drain-source on-state resistance I D = f(V DS); T j = 25 °C R DS(on) = f(I D); T j = 25 °C parameter: V GS parameter: V GS 360 12 10 V 7V 5V 300 10 180 RDS(on) [mW] ID [A] 240 6V 120 8 5.5 V 5.5 V 6V 6 60 5V 7V 10 V 0 0 2 4 4 6 0 30 VDS [V] 60 90 ID [A] 7 Typ. transfer characteristics 8 Typ. drain-source on-state resistance I D = f(V GS); V DS = 6V R DS(on) = f(T j); I D = 90 A; V GS = 10 V parameter: T j 360 9 8 240 7 RDS(on) [mW] ID [A] -55 °C 25 °C 175 °C 300 180 120 5 60 4 0 2.5 4.5 3 6.5 -60 VGS [V] Rev. 1.1 6 -20 20 60 100 140 180 Tj [°C] page 5 2015-09-22 IPD90N08S4-05 9 Typ. gate threshold voltage 10 Typ. capacitances V GS(th) = f(T j); V GS = V DS C = f(V DS); V GS = 0 V; f = 1 MHz parameter: I D 104 3.5 Ciss 3 900 µA C [pF] Coss VGS(th) [V] 2.5 103 90 µA 2 Crss 102 1.5 101 1 -60 -20 20 60 100 140 0 180 10 20 30 40 50 60 70 80 VDS [V] Tj [°C] 11 Typical forward diode characteristicis 12 Avalanche characteristics IF = f(VSD) I A S= f(t AV) parameter: T j parameter: Tj(start) 100 103 25 °C 100 °C 150 °C IF [A] IAV [A] 102 175 °C 175 °C 10 25 °C 25 °C 101 100 0 0.2 0.4 0.6 0.8 1 1.2 1.4 VSD [V] Rev. 1.1 1 1 10 100 1000 tAV [µs] page 6 2015-09-22 IPD90N08S4-05 13 Avalanche energy 14 Drain-source breakdown voltage E AS = f(T j) V BR(DSS) = f(T j); I D = 1 mA 90 1000 88 900 800 86 700 84 600 82 VBR(DSS) [V] EAS [mJ] 19 A 500 38 A 400 80 78 76 300 75 A 200 74 72 100 70 0 25 75 125 -55 175 -15 Tj [°C] 25 65 105 145 Tj [°C] 15 Typ. gate charge 16 Gate charge waveforms V GS = f(Q gate); I D = 90 A pulsed parameter: V DD 10 V GS 9 Qg 8 16 V 64 V 7 VGS [V] 6 5 V g s(th) 4 3 2 Q g (th) Q sw Q gate 1 Q gs 0 0 20 40 Q gd 60 Qgate [nC] Rev. 1.1 page 7 2015-09-22 IPD90N08S4-05 Published by Infineon Technologies AG 81726 Munich, Germany © Infineon Technologies AG 2014 All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev. 1.1 page 8 2015-09-22 IPD90N08S4-05 Revision History Version Date Changes Revision 1.0 2014-06-20 Final data sheet Revision 1.1 2015-09-22 Update of ZthJC diagram Rev. 1.1 page 9 2015-09-22