IR25607STRPBF

IR25607SPBF High and Low Side Driver Features              Product Summary Floating channel designed for bootstrap operation Fully operational to +600V Tolerant to negative transient voltage dV/dt immune Gate drive supply range from 10 to 20V Undervoltage lockout for both channels 3.3V logic compatible Separate logic supply range from 3.3V to 20V Logic and power ground ±5V offset CMOS Schmitt-triggered inputs with pull-down Cycle by cycle edge-triggered shutdown logic Matched propagation delay for both channels Outputs in phase with inputs VOFFSET 600V max. IO+/- 2A / 2A VOUT 10 – 20V Ton/off (typ.) 120 & 94 ns Delay Matching (typ.) 20 ns Package Options Description The IR25607 is a high voltage, high speed power MOSFET and IGBT driver with independent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. Logic inputs are compatible with standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600 V. 16 Lead SOIC Wide Body Ordering Information Standard Pack Base Part Number Package Type Form Quantity IR25607SPBF SO16W Tube 45 IR25607SPBF SO16W Tape and Reel 1000 1 www.irf.com © 2013 International Rectifier Orderable Part Number IR25607SPBF IR25607STRPBF March 26, 2013 IR25607SPBF Typical Connection Diagram up to 600V 2 www.irf.com © 2013 International Rectifier March 26, 2013 IR25607SPBF Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Symbol VB VS VHO VCC VLO VDD VSS VIN dVs/dt PD RthJA TJ TS TL Definition High side floating supply voltage High side floating supply offset voltage High side floating output voltage Low side and logic fixed supply voltage Low side output voltage Logic supply voltage Logic supply offset voltage Logic input voltage (HIN, LIN & SD ) Min. -0.3 Max. 625 VB - 25 VS - 0.3 -0.3 -0.3 -0.3 VB + 0.3 VB + 0.3 25 Units V VCC – 25 VSS -0.3 — VCC + 0.3 VSS + 25 VCC + 0.3 VDD + 0.3 50 V/ns Package power dissipation @ TA ≤ +25°C — 1.25 W Thermal resistance, junction to ambient — 100 °C/W Junction temperature Storage temperature Lead temperature (soldering, 10 seconds) — -55 — 150 150 300 °C Allowable offset supply voltage transient Recommended Operating Conditions For proper operation the device should be used within the recommended conditions. The VS and VSS offset ratings are tested with all supplies biased at 15V differential. Symbol VB VS VHO VCC VLO VDD VSS VIN TA Definition High side floating supply absolute voltage High side floating supply offset voltage High side floating output voltage Low side fixed supply voltage Low side output voltage Logic supply voltage Logic supply offset voltage Logic input voltage (HIN, LIN & SD ) Ambient temperature Min. Max. VS + 10 † VS + 20 600 VS 10 VB 20 0 VSS + 3 -5 †† VCC VSS + 20 5 VSS -40 VDD 125 Units V °C † Logic operational for VS of -5 to +600V. Logic state held for VS of -5V to -VBS. (Please refer to Design Tip DT97-3 for more details). †† When VDD < 5V, the minimum VSS offset is limited to -VDD. 3 www.irf.com © 2013 International Rectifier March 26, 2013 IR25607SPBF Dynamic Electrical Characteristics VBIAS (VCC, VBS, VDD) = 15V, CL = 1000 pF, VSS = COM and TA = 25°C unless otherwise specified. Symbol Definition Min. Typ. Max. Units Test Conditions ton Turn-on propagation delay — 120 150 VS = 0V toff Turn-off propagation delay — 94 125 VS = 600V tsd tr tf MT Shutdown propagation delay Turn-on rise time Turn-off fall time Delay matching, HS & LS turn-on/off — — — — 110 25 17 — 140 35 25 20 ns VS = 600V Static Electrical Characteristics VBIAS (VCC, VBS, VDD) = 15V, VSS = COM and TA = 25°C unless otherwise specified. The VIN, VTH and IIN parameters are referenced to VSS and are applicable to all three logic input leads: HIN, LIN and SD. The VO and IO parameters are referenced to COM and are applicable to the respective output leads: HO and LO. Symbol VIH VIL VOH VOL ILK IQBS IQCC IQDD IIN+ IINVBSUV+ VBSUVVCCUV+ VCCUVIO+ IO- 4 Definition Logic ―1‖ input voltage Logic ―0‖ input voltage High level output voltage, VBIAS - VO Low level output voltage, VO Offset supply leakage current Quiescent VBS supply current Quiescent VCC supply current Quiescent VCC supply current Logic ―1‖ input bias current Logic ―0‖ input bias current VBS supply undervoltage positive going threshold VBS supply undervoltage negative going threshold VCC supply undervoltage positive going threshold VCC supply undervoltage negative going threshold Output high short circuit pulsed current Output low short circuit pulsed current www.irf.com © 2013 International Rectifier Min. Typ. Max. 9.5 — — — — — — — — — — — — — — 125 180 15 20 — — 6.0 1.2 0.1 50 230 340 30 40 1 7.5 8.6 9.7 7.0 8.2 9.4 7.4 8.5 9.6 7.0 8.2 9.4 2 2.5 — Units V μA 2.5 — IO = 0A IO = 0A VB = VS = 600V VIN = 0V or VDD VIN = 0V or VDD VIN = 0V or VDD VIN = VDD VIN = 0V V A 2 Test Conditions VO = 0V, VIN = VDD PW ≤ 10 μs VO = 15V, VIN = VDD PW ≤ 10 μs March 26, 2013 IR25607SPBF Functional Block Diagram 5 www.irf.com © 2013 International Rectifier March 26, 2013 IR25607SPBF Lead Definitions Symbol Description Logic supply Logic input for high side gate driver output (HO), in phase Logic input for shutdown Logic input for low side gate driver output (LO), in phase Logic ground High side floating supply High side gate drive output High side floating supply return Low side and logic fixed supply Low side gate drive output Low side return VDD HIN SD LIN VSS VB HO VS VCC LO COM Lead Assignments 6 www.irf.com © 2013 International Rectifier March 26, 2013 IR25607SPBF Application Information and Additional Details Figure 1. Input/Output Timing Diagram Figure 2. Switching Time Waveform Definitions Figure 3. Shutdown Waveform Definitions Figure 4. Delay matching Waveform Definitions 7 www.irf.com © 2013 International Rectifier March 26, 2013 IR25607SPBF Figure 5A. Turn On Time vs. Temperature Figure 5B. Turn On Time vs. VCC/VBS Supply Voltage Figure 5C. Turn On Time vs. VDD Supply Voltage Figure 6A. Turn Off Time vs. Temperature Figure 6B. Turn Off Time vs. VCC/VBS Supply Voltage Figure 6C. Turn Off Time vs. VDD Supply Voltage 8 www.irf.com © 2013 International Rectifier March 26, 2013 IR25607SPBF Figure 7A. Shutdown Time vs. Temperature Figure 7B. Shutdown Time vs. VCC/VBS Supply Voltage Figure 7C. Shutdown Time vs. VDD Supply Voltage Figure 8A. Turn On Rise Time vs. Temperature Figure 8B. Turn On Rise Time vs. Voltage Figure 9A. Turn Off Fall Time vs. Temperature 9 www.irf.com © 2013 International Rectifier March 26, 2013 IR25607SPBF Figure 9B. Turn Off Fall Time vs. Voltage Figure 10A. logic ‘1’ Input Threshold vs. Temperature Figure 10B. Logic ‘1’ Input Threshold vs. Voltage Figure 11A. Logic ‘0’ Input Threshold vs. Temperature Figure 11B. Logic ‘0’ Input Threshold vs. Voltage Figure 12A. High Level Output vs. Temperature 10 www.irf.com © 2013 International Rectifier March 26, 2013 IR25607SPBF Figure 12B. High Level Output vs. Voltage Figure 13A. Low Level Output vs. Temperature Figure 13B. Low Level Output vs. Voltage Figure 14A. Offset Supply Current vs. Temperature Figure 14B. Offset Supply Current vs. Voltage Figure 15A. VBS Supply Current vs. Temperature 11 www.irf.com © 2013 International Rectifier March 26, 2013 IR25607SPBF Figure 15B. VBS Supply Current vs. Voltage Figure 16A. VCC Supply Current vs. Temperature Figure 16B. VCC Supply Current vs. Voltage Figure 17A. VDD Supply Current vs. Temperature Figure 17B. VDD Supply Current vs. VDD Voltage Figure 18A. Logic ‘1’ Input Current vs. Temperature 12 www.irf.com © 2013 International Rectifier March 26, 2013 IR25607SPBF Figure 18B. Logic ‘1’ Input Current vs. VDD Voltage Figure 19A. Logic ‘0’ Input Current vs. Temperature Figure 19B. Logic ‘0’ Input Current vs. VDD Voltage Figure 20. VBS Undervoltage (+) vs. Temperature Figure 21 VBS Undervoltage (-) vs. Temperature Figure 22. VCC Undervoltage (+) vs. Temperature 13 www.irf.com © 2013 International Rectifier March 26, 2013 IR25607SPBF Figure 23. VCC Undervoltage (-) vs. Temperature Figure 24A. Output Source Current vs. Temperature Figure 24B. Output Source Current vs. Voltage Figure 25A. Output Sink Current vs. Temperature Figure 25B. Output Sink Current vs. Voltage Figure 26. Maximum VS Negative Offset vs. VBS Supply Voltage 14 www.irf.com © 2013 International Rectifier March 26, 2013 IR25607SPBF Figure 27. Maximum VSS Positive Offset vs. VCC Supply Voltage 15 www.irf.com © 2013 International Rectifier March 26, 2013 IR25607SPBF Package Details 16 www.irf.com © 2013 International Rectifier March 26, 2013 IR25607SPBF Tape and Reel Details LOADED TAPE FEED DIRECTION A B H D F C NOTE : CONTROLLING DIMENSION IN MM E G CARRIER TAPE DIMENSION FOR 16SOICN Metric Imperial Code Min Max Min Max A 7.90 8.10 0.311 0.318 B 3.90 4.10 0.153 0.161 C 15.70 16.30 0.618 0.641 D 7.40 7.60 0.291 0.299 E 6.40 6.60 0.252 0.260 F 10.20 10.40 0.402 0.409 G 1.50 n/a 0.059 n/a H 1.50 1.60 0.059 0.062 F D C B A E G H REEL DIMENSIONS FOR 16SOICN Metric Imperial Code Min Max Min Max A 329.60 330.25 12.976 13.001 B 20.95 21.45 0.824 0.844 C 12.80 13.20 0.503 0.519 D 1.95 2.45 0.767 0.096 E 98.00 102.00 3.858 4.015 F n/a 22.40 n/a 0.881 G 18.50 21.10 0.728 0.830 H 16.40 18.40 0.645 0.724 17 www.irf.com © 2013 International Rectifier March 26, 2013 IR25607SPBF Part Marking Information IRxxxxx Part number YWW ? Date code Pin 1 Identifier ? XXXX ? MARKING CODE P Lead Free Released Non-Lead Free Released 18 www.irf.com IR logo © 2013 International Rectifier Lot Code (Prod mode – 4 digit SPN code) Assembly site code Per SCOP 200-002 March 26, 2013 IR25607SPBF Qualification Information † †† Industrial (per JEDEC JESD 47) Comments: This family of ICs has passed JEDEC’s Industrial qualification. IR’s Consumer qualification level is granted by extension of the higher Industrial level. ††† MSL3 (per IPC/JEDEC J-STD-020) Yes Qualification Level Moisture Sensitivity Level RoHS Compliant † †† Qualification standards can be found at International Rectifier’s web site http://www.irf.com/ Higher qualification ratings may be available should the user have such requirements. Please contact your International Rectifier sales representative for further information. ††† Higher MSL ratings may be available for the specific package types listed here. Please contact your International Rectifier sales representative for further information. The information provided in this document is believed to be accurate and reliable. However, International Rectifier assumes no responsibility for the consequences of the use of this information. International Rectifier assumes no responsibility for any infringement of patents or of other rights of third parties which may result from the use of this information. No license is granted by implication or otherwise under any patent or patent rights of International Rectifier. The specifications mentioned in this document are subject to change without notice. This document supersedes and replaces all information previously supplied. For technical support, please contact IR’s Technical Assistance Center http://www.irf.com/technical-info/ WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 19 www.irf.com © 2013 International Rectifier March 26, 2013