IR3590MIB01TRP

  Digital Multi-Phase Redundant Controller FEATURES     IR3590 DESCRIPTION 6-phase single loop configurable PWM Controller Serial I2C control for Vout changes Programmable Constant Current Protection Dead-phase Protection and Flag  Min/Max Telemetry registers and real-time monitoring via I2C (IIN, VIN, IOUT, VOUT, Temp)  Programmable 1-phase or 2-phase for Light Loads and Active Diode Emulation for Very Light Loads  IR Adaptive Transient Algorithm (ATA) minimizes output bulk capacitors and system cost  IR Efficiency Shaping Features including Variable Gate Drive and Dynamic Phase Control The IR3590 is a 6-phase digital, single loop, multiphase buck controller with a feature set optimized to support redundant power supply systems. The IR3590 includes IR’s Efficiency Shaping Technology to deliver exceptional efficiency at minimum cost across the entire load range. IR Variable Gate Drive optimizes the MOSFET gate drive voltage based on real-time load current. IR’s Dynamic Phase Control adds/drops phases based upon load current. The IR3590 can be configured to enter 1-phase operation and active diode emulation mode automatically or by command. IR’s unique Adaptive Transient Algorithm (ATA), based on proprietary non-linear digital PWM algorithms, minimizes output bulk capacitors, and improves transient response and form factor.  Auto-Phase Detection with auto-compensation  Fault Protection: Output OVP, UVP, OC Warn, OCP, OT Warn, OTP  Multiple Time Programming (MTP) with integrated charge pump for easy custom configuration  Compatible with IR ATL and 3.3V tri-state Drivers  200kHz to 2MHz switching frequency per phase  +3.3V supply voltage; -40°C to 85°C Ambient The I2C interface can communicate with up to 127 IR3590-based VR loops. Device configuration and fault parameters are easily defined using the IR Digital Power Design Center (DPDC) GUI and stored in on-chip MTP. MTP storage saves pins and enables a small package size. The IR3590 extensive fault protection includes output OV, UV and OC protection, a thermistor based OT protection input with a VRHOT signal output, and a selectable and separate Over Current warning flag through the ALERT#  Pb-Free, Halogen Free, RoHS, 5x5mm, 40-pin, 0.4mm pitch QFN   APPLICATIONS  Supports Phase Redundant based Server systems  Server CPU  Server Memory ORDERING INFORMATION Base Part Number Package Type IR3590 Standard Pack Form Quantity Orderable Part Number QFN 5 mm x 5 mm Tape and Reel 3000 IR3590MxxyyTRP IR3590 QFN 5 mm x 5 mm Tape and Reel 3000 IR3590MTRPBF IR3590 QFN 5 mm x 5 mm Tray 4900 IR3590MTYPBF 2 1 1 Notes: 1. Unprogrammed/blank parts will not start up until programmed in order to ensure a safe power up. 2. Customer Specific Configuration File, where xx = Customer ID and yy = Configuration File (Codes assigned by IR Marketing).   1 www.irf.com | © 2014 International Rectifier February 4, 2014 | V2.05