IRAM136-1060B

PD-97280 RevA IRAM136-1060B Series 10A, 600V Integrated Power Hybrid IC for Appliance Motor Drive Applications with Internal Shunt Resistor Description International Rectifier's IRAM136-1060B is a 10A, 600V Integrated Power Hybrid IC designed for advanced Appliance Motor Drives applications. Typical applications include energy efficient Washing Machine, Fans, Air Conditions and Refrigerator Compressor Drivers. This module offers an extremely compact, high performance AC motor-driver in an isolated package that simplifies design. Several built-in protection features such as over current, temperature monitoring, shoot through prevention and under voltage lockout makes this a very robust solution. The combination of highly efficient Trench IGBT technology and the industry benchmark 3-phase HVIC driver (3.3V/5V input compatible) and a fully isolated thermally enhanced package makes this a highly competitive solution. The compact Single in line (SIP05) package minimizes PCB space. Features x x x x x x x x x x x Internal Shunt Resistor and current feedback Integrated gate drivers and bootstrap diodes Temperature feedback Programmable over current protection pin High efficiency Trench IGBT technology Under-voltage lockout for all channels Matched propagation delay for all channels 3.3V/5V Schmitt-triggered input logic Cross-conduction prevention logic Motor Power range 0.25~0.75kW / 85~253 Vac Isolation 2000VRMS min and CTI> 600 Absolute Maximum Ratings VCES / VRRM IGBT/ FW Diode Blocking Voltage 600 V+ Io @ TC=25°C Positive Bus Input Voltage 450 RMS Phase Current (Note 1) 10 Io @ TC=100°C RMS Phase Current (Note 1) 5 Ipk Maximum Peak Phase Current (Note 2) 13 Fp Maximum PWM Carrier Frequency 20 Pd Maximum Power dissipation per IGBT @ TC =25°C 25 W VRMS VISO Isolation Voltage (1min) 2000 TJ (IGBT & Diode & IC) Maximum Operating Junction Temperature +150 TC Operating Case Temperature Range -20 to +100 TSTG Storage Temperature Range -40 to +125 T Mounting torque Range (M3 screw) 0.8 to 1.0 V A kHz °C Nm Note 1: Sinusoidal Modulation at V+=400V, TJ=150°C, FPWM=16kHz, Modulation Depth=0.8, PF=0.6, See Figure 3. Note 2: tP 400ns TITRIP ITRIP to six switch turn-off propagation delay (see fig. 2) --- --- 1.75 μs IC=5A, V+=300V TFLT-CLR FAULT clear time (see fig. 2) --- 32.0 --- ms TC = 25°C www.irf.com Units Conditions μs IC=5A, V+=300V 5 IRAM136-1060B Thermal and Mechanical Characteristics Symbol Parameter Min Typ Max Rth(J-C) Thermal resistance, per IGBT --- 4.6 5.0 Rth(J-C) Thermal resistance, per Diode --- 6.9 7.6 --- Units Conditions Inverter Operating Condition Flat, greased surface. Heatsink °C/W compound thermal conductivity 1W/mK Rth(C-S) Thermal resistance, C-S --- 0.1 CD Creepage Distance, from pins to backside of module 3.2 --- --- mm CTI Comparative Tracking Index 600 --- --- - See outline Drawings Internal NTC - Thermistor Characteristics Parameter Definition Min Typ Max R25 Resistance 97 100 103 Units Conditions k TC = 25°C R125 Resistance 2.25 2.52 2.80 k TC = 125°C B B-constant (25-50°C) 4165 4250 4335 k Temperature Range -40 --- 125 °C Typ. Dissipation constant --- 1 --- R2 = R1e [B(1/T2 - 1/T1)] mW/°C TC = 25°C Internal Current Sensing Resistor - Shunt Characteristics Symbol Parameter Min Typ Max Units Conditions RShunt Resistance 32.9 33.3 33.7 m 0 --- 200 ppm/°C TCoeff Temperature Coefficient PShunt Power Dissipation --- --- 2.2 W TRange Temperature Range -40 --- 125 °C TC = 25°C -40°C< TC