IRAMX16UP60A

PD-94684 RevF Integrated Power Hybrid IC for Appliance Motor Drive Applications. IRAMX16UP60A Series 16A, 600V Description International Rectifier's IRAMX16UP60A is an Integrated Power Module developed and optimized for electronic motor control in appliance applications such as washing machines and variable speed compressor drives for in-room air-conditioning systems and commercial refrigerators. Plug N Drive technology offers an extremely compact, high performance AC motor-driver in a single isolated package for a very simple design. An open emitter configuration of the low side IGBT switches offer easy current feedback and overcurrent monitor for high precision and reliable control. A built-in temperature monitor and over-current protection, along with the short-circuit rated IGBTs and integrated under-voltage lockout function, deliver high level of protection and fail-safe operation. The integration of the bootstrap diodes for the high-side driver section, and the single polarity power supply required to drive the internal circuitry, simplify the utilization of the module and deliver further cost reduction advantages. Features • Integrated Gate Drivers and Bootstrap Diodes. • Temperature Monitor • Temperature and Overcurrent shutdown • Fully Isolated Package. • Low VCE (on) Non Punch Through IGBT Technology. • Undervoltage lockout for all channels • Matched propagation delay for all channels • Low side IGBT emitter pins for current control • Schmitt-triggered input logic • Cross-conduction prevention logic • Lower di/dt gate driver for better noise immunity • Motor Power range 0.75~2kW / 85~253 Vac • Isolation 2000VRMS min Absolute Maximum Ratings Parameter Description VCES / VRRM IGBT/Diode Blocking Voltage Value 600 V+ Positive Bus Input Voltage 450 IO @ TC=25°C RMS Phase Current (Note 1) 16 IO @ TC=100°C RMS Phase Current (Note 1) 8 IO Pulsed RMS Phase Current (Note 2) 30 FPWM PWM Carrier Frequency 20 PD Power dissipation per IGBT @ TC =25°C 31 W VISO Isolation Voltage (1min) 2000 VRMS TJ (IGBT & Diodes) Operating Junction temperature Range -40 to +150 TJ (Driver IC) Operating Junction temperature Range -40 to +150 T Mounting torque Range (M3 screw) 0.5 to 1.0 Units V A kHz °C Nm Note 1: Sinusoidal Modulation at V+=400V, TJ=150°C, FPWM=16kHz, Modulation Depth=0.8, PF=0.6, See Figure 3. Note 2: tP