PD - 95260
IRF9410PbF
l
l
l
l
l
l
l
HEXFET® Power MOSFET
Generation V Technology
Ultra Low On-Resistance
N-Channel MOSFET
Surface Mount
Very Low Gate Charge and
Switching Losses
Fully Avalanche Rated
Lead-Free
A
A
D
1
8
S
2
7
D
S
3
6
D
4
5
D
S
G
VDSS = 30V
RDS(on) = 0.030Ω
Top View
Description
Fifth Generation HEXFETs from International Rectifier
utilize advanced processing techniques to achieve
extremely low on-resistance per silicon area. This
benefit, combined with the fast switching speed and
ruggedized device design that HEXFET Power
MOSFETs are well known for, provides the designer
with an extremely efficient and reliable device for use
in a wide variety of applications.
Recommended upgrade: IRF7403 or IRF7413
Lower profile/smaller equivalent: IRF7603
The SO-8 has been modified through a customized
leadframe for enhanced thermal characteristics and
multiple-die capability making it ideal in a variety of
power applications. With these improvements, multiple
devices can be used in an application with dramatically
reduced board space. The package is designed for
vapor phase, infra red, or wave soldering techniques.
SO-8
Absolute Maximum Ratings ( TA = 25°C Unless Otherwise Noted)
Drain-Source Voltage
Gate-Source Voltage
Continuous Drain Current
TA = 25°C
TA = 70°C
Pulsed Drain Current
Continuous Source Current (Diode Conduction)
TA = 25°C
Maximum Power Dissipation
TA = 70°C
Single Pulse Avalanche Energy
Avalanche Current
Repetitive Avalanche Energy
Peak Diode Recovery dv/dt
Junction and Storage Temperature Range
Symbol
Maximum
VDS
V GS
30
± 20
7.0
5.8
37
2.8
2.5
1.6
70
4.2
0.25
5.0
-55 to + 150
ID
IDM
IS
PD
EAS
IAR
EAR
dv/dt
TJ, TSTG
Units
V
A
W
mJ
A
mJ
V/ ns
°C
Thermal Resistance Ratings
Parameter
Maximum Junction-to-Ambient
www.irf.com
Symbol
Limit
Units
RθJA
50
°C/W
1
09/21/04
IRF9410PbF
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
∆V(BR)DSS/∆TJ
Parameter
Drain-to-Source Breakdown Voltage
Breakdown Voltage Temp. Coefficient
RDS(on)
Static Drain-to-Source On-Resistance
V GS(th)
g fs
Gate Threshold Voltage
Forward Transconductance
IDSS
Drain-to-Source Leakage Current
V (BR)DSS
I GSS
Qg
Qgs
Qgd
t d(on)
tr
t d(off)
tf
C iss
Coss
C rss
Gate-to-Source Forward Leakage
Gate-to-Source Reverse Leakage
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain ("Miller") Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Min.
30
1.0
Typ.
0.024
0.024
0.032
0.037
14
18
2.4
4.9
7.3
8.3
23
17
550
260
100
Max. Units
Conditions
V
VGS = 0V, ID = 250µA
V/°C Reference to 25°C, ID = 1mA
0.030
VGS = 10V, ID = 7.0A
0.040
Ω
VGS = 5.0V, ID = 4.0A
0.050
VGS = 4.5V, ID = 3.5A
V
VDS = VGS, ID = 250µA
S
VDS = 15V, I D = 7.0A
2.0
VDS = 24V, VGS = 0V
µA
25
VDS = 24V, VGS = 0V, TJ = 55°C
100
VGS = 20V
nA
-100
VGS = -20V
27
ID = 2.0A
3.6
nC VDS = 15V
7.4
VGS = 10V, See Fig. 10
15
VDD = 25V
17
ID = 1.0A
ns
46
RG = 6.0Ω, V GS = 10V
34
RD = 25Ω
VGS = 0V
pF
VDS = 25V
= 1.0MHz, See Fig. 9
Source-Drain Ratings and Characteristics
IS
I SM
VSD
trr
Qrr
Parameter
Continuous Source Current
(Body Diode)
Pulsed Source Current
(Body Diode)
Diode Forward Voltage
Reverse Recovery Time
Reverse RecoveryCharge
Min. Typ. Max. Units
2.8
37
A
0.78
40
63
1.0
80
130
V
ns
nC
Conditions
MOSFET symbol
showing the
G
integral reverse
p-n junction diode.
TJ = 25°C, IS = 2.0A, VGS = 0V
TJ = 25°C, IF = 2.0A
di/dt = 100A/µs
D
S
Notes:
Repetitive rating; pulse width limited by
max. junction temperature. ( See fig. 11 )
Starting TJ = 25°C, L = 6.6mH
RG = 25Ω, IAS = 4.6A.
ISD ≤ 4.6A, di/dt ≤ 120A/µs, VDD ≤ V(BR)DSS,
TJ ≤ 150°C
Pulse width ≤ 300µs; duty cycle ≤ 2%.
Surface mounted on FR-4 board, t ≤ 10sec.
2
www.irf.com
IRF9410PbF
100
100
VGS
15V
10V
7.0V
5.5V
4.5V
4.0V
3.5V
BOTTOM 3.0V
VGS
15V
10V
7.0V
5.5V
4.5V
4.0V
3.5V
BOTTOM 3.0V
TOP
I D, Drain-to-Source Current (A)
I D , Drain-to-Source Current (A)
TOP
10
3.0V
1
0.1
20µs PULSE WIDTH
TJ = 25°C
A
1
10
3.0V
20µs PULSE WIDTH
TJ = 150°C
A
1
10
0.1
V DS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
10
Fig 2. Typical Output Characteristics
100
ISD , Reverse Drain Current (A)
100
I D , Drain-to-Source Current (A)
1
VDS , Drain-to-Source Voltage (V)
TJ = 25°C
TJ = 150°C
10
V DS = 10V
20µs PULSE WIDTH
1
3.0
3.5
4.0
4.5
5.0
VGS , Gate-to-Source Voltage (V)
Fig 3. Typical Transfer Characteristics
www.irf.com
A
5.5
10
TJ = 150°C
TJ = 25°C
1
VGS = 0V
0.1
0.4
0.6
0.8
1.0
A
1.2
VSD , Source-to-Drain Voltage (V)
Fig 4. Typical Source-Drain Diode
Forward Voltage
3
R DS(on) , Drain-to-Source On Resistance
(Normalized)
2.0
ID = 7.0A
1.5
1.0
0.5
VGS = 10V
0.0
-60 -40 -20
0
20
40
60
80 100 120 140 160
R DS(on) , Drain-to-Source On Resistance (Ω)
IRF9410PbF
0.05
0.04
VGS = 4.5V
0.03
VGS = 10V
0.02
0
TJ , Junction Temperature ( °C)
E AS , Single Pulse Avalanche Energy (mJ)
RDS (on) , Drain-to-Source On Resistance (Ω)
0.12
0.10
0.08
0.06
I D = 7.0A
0.02
0.00
A
6
9
12
VGS -Gate-to-Source Voltage (V)
Fig 7. Typical On-Resistance Vs. Gate
Voltage
4
15
20
25
A
Fig 6. Typical On-Resistance Vs. Drain
Current
0.14
3
10
I D , Drain Current (A)
Fig 5. Normalized On-Resistance
Vs. Temperature
0.04
5
15
200
TOP
BOTTOM
160
ID
2.1A
3.7A
4.6A
120
80
40
A
0
25
50
75
100
125
150
Starting T J , Junction Temperature (°C)
Fig 8. Maximum Avalanche Energy
Vs. Drain Current
www.irf.com
IRF9410PbF
1000
VGS , Gate-to-Source Voltage (V)
800
C, Capacitance (pF)
20
V GS = 0V,
f = 1MHz
C iss = Cgs + C gd , Cds SHORTED
C rss = C gd
C oss = C ds + C gd
Ciss
600
Coss
400
Crss
200
0
A
1
10
100
ID = 2.0A
VDS = 15V
16
12
8
4
0
0
6
12
18
24
30
QG , Total Gate Charge (nC)
VDS , Drain-to-Source Voltage (V)
Fig 9. Typical Capacitance Vs.
Drain-to-Source Voltage
Fig 10. Typical Gate Charge Vs.
Gate-to-Source Voltage
Thermal Response (Z thJA )
100
0.50
10
0.20
0.10
0.05
PDM
0.02
1
t1
0.01
t2
Notes:
1. Duty factor D = t 1 / t 2
2. Peak T J = P DM x Z thJA + TA
SINGLE PULSE
(THERMAL RESPONSE)
0.1
0.00001
0.0001
0.001
0.01
0.1
1
10
100
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Ambient
www.irf.com
5
IRF9410PbF
SO-8 Package Outline
Dimensions are shown in millimeters (inches)
D
5
A
8
7
6
5
6
H
0.25 [.010]
1
2
3
A
4
MAX
MIN
.0532
.0688
1.35
1.75
A1 .0040
.0098
0.10
0.25
b
.013
.020
0.33
0.51
c
.0075
.0098
0.19
0.25
D
.189
.1968
4.80
5.00
E
.1497
.1574
3.80
4.00
e
.050 BASIC
1.27 BASIC
e1
6X
e
e1
C
.025 BASIC
0.635 BASIC
H
.2284
.2440
5.80
6.20
K
.0099
.0196
0.25
0.50
L
.016
.050
0.40
1.27
y
0°
8°
0°
8°
y
0.10 [.004]
0.25 [.010]
MAX
K x 45°
A
8X b
MILLIMETERS
MIN
A
E
INCHES
DIM
B
A1
8X L
8X c
7
C A B
F OOTPRINT
NOT ES :
1. DIMENS IONING & TOLERANCING PER ASME Y14.5M-1994.
8X 0.72 [.028]
2. CONT ROLLING DIMENS ION: MILLIMET ER
3. DIMENS IONS ARE SHOWN IN MILLIMETERS [INCHES].
4. OUTLINE CONFORMS TO JEDEC OUTLINE MS -012AA.
5 DIMENS ION DOES NOT INCLUDE MOLD PROT RUSIONS .
MOLD PROTRUS IONS NOT TO EXCEED 0.15 [.006].
6 DIMENS ION DOES NOT INCLUDE MOLD PROT RUSIONS .
MOLD PROTRUS IONS NOT TO EXCEED 0.25 [.010].
6.46 [.255]
7 DIMENS ION IS T HE LENGT H OF LEAD FOR SOLDERING TO
A S UBST RAT E.
3X 1.27 [.050]
8X 1.78 [.070]
SO-8 Part Marking
EXAMPLE: T HIS IS AN IRF7101 (MOSFET )
INT ERNAT IONAL
RECT IFIER
LOGO
XXXX
F7101
DAT E CODE (YWW)
P = DES IGNAT ES LEAD-FREE
PRODUCT (OPT IONAL)
Y = LAS T DIGIT OF T HE YEAR
WW = WEEK
A = AS S EMBLY S IT E CODE
LOT CODE
PART NUMBER
6
www.irf.com
IRF9410PbF
SO-8 Tape and Reel
Dimensions are shown in millimeters (inches)
TERMINAL NUMBER 1
12.3 ( .484 )
11.7 ( .461 )
8.1 ( .318 )
7.9 ( .312 )
FEED DIRECTION
NOTES:
1. CONTROLLING DIMENSION : MILLIMETER.
2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS(INCHES).
3. OUTLINE CONFORMS TO EIA-481 & EIA-541.
330.00
(12.992)
MAX.
14.40 ( .566 )
12.40 ( .488 )
NOTES :
1. CONTROLLING DIMENSION : MILLIMETER.
2. OUTLINE CONFORMS TO EIA-481 & EIA-541.
Data and specifications subject to change without notice.
This product has been designed and qualified for the Consumer market.
Qualifications Standards can be found on IR’s Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.09/04
www.irf.com
7
IMPORTANT NOTICE
The information given in this document shall in no
event be regarded as a guarantee of conditions or
characteristics (“Beschaffenheitsgarantie”) .
With respect to any examples, hints or any typical
values stated herein and/or any information
regarding the application of the product, Infineon
Technologies hereby disclaims any and all
warranties and liabilities of any kind, including
without limitation warranties of non-infringement
of intellectual property rights of any third party.
In addition, any information given in this document
is subject to customer’s compliance with its
obligations stated in this document and any
applicable legal requirements, norms and
standards concerning customer’s products and any
use of the product of Infineon Technologies in
customer’s applications.
The data contained in this document is exclusively
intended for technically trained staff. It is the
responsibility of customer’s technical departments
to evaluate the suitability of the product for the
intended application and the completeness of the
product information given in this document with
respect to such application.
For further information on the product, technology,
delivery terms and conditions and prices please
contact your nearest Infineon Technologies office
(www.infineon.com).
WARNINGS
Due to technical requirements products may
contain dangerous substances. For information on
the types in question please contact your nearest
Infineon Technologies office.
Except as otherwise explicitly approved by Infineon
Technologies in a written document signed by
authorized
representatives
of
Infineon
Technologies, Infineon Technologies’ products may
not be used in any applications where a failure of
the product or any consequences of the use thereof
can reasonably be expected to result in personal
injury.
