IRF9Z34NSTRLPBF

PD- 95769 IRF9Z34NSPbF IRF9Z34NLPbF • Lead-Free www.irf.com 1 04/25/05 IRF9Z34NS/LPbF 2 www.irf.com IRF9Z34NS/LPbF www.irf.com 3 IRF9Z34NS/LPbF 4 www.irf.com IRF9Z34NS/LPbF www.irf.com 5 IRF9Z34NS/LPbF 6 www.irf.com IRF9Z34NS/LPbF www.irf.com 7 IRF9Z34NS/LPbF D2Pak Package Outline (Dimensions are shown in millimeters (inches) D2Pak Part Marking Information T HIS IS AN IRF 530S WIT H LOT CODE 8024 ASSEMBLE D ON WW 02, 2000 IN T HE ASSE MBLY LINE "L" INT ERNAT IONAL RECT IFIER LOGO AS SEMBLY LOT CODE PART NUMBER F 530S DAT E CODE YEAR 0 = 2000 WEEK 02 LINE L OR INTE RNAT IONAL RECT IFIER LOGO ASS EMBLY LOT CODE 8 PART NUMBER F530S DAT E CODE P = DES IGNAT E S LEAD - FREE PRODUCT (OPT IONAL) YE AR 0 = 2000 WEEK 02 A = ASSE MBLY S IT E CODE www.irf.com IRF9Z34NS/LPbF TO-262 Package Outline (Dimensions are shown in millimeters (inches) TO-262 Part Marking Information EXAMPLE: T HIS IS AN IRL3103L LOT CODE 1789 ASSE MBLED ON WW 19, 1997 IN THE ASS EMBLY LINE "C" Note: "P" in as s embly line pos ition indicates "Lead-Free" INTE RNATIONAL RECT IFIER LOGO AS SEMBLY LOT CODE PART NUMBER DAT E CODE YEAR 7 = 1997 WE EK 19 LINE C OR INT ERNAT IONAL RECT IF IER LOGO ASSEMBLY LOT CODE www.irf.com PART NUMBER DAT E CODE P = DES IGNATE S LEAD-FREE PRODUCT (OPT IONAL) YEAR 7 = 1997 WEEK 19 A = ASS EMB LY SITE CODE 9 IRF9Z34NS/LPbF D2Pak Tape & Reel Information Dimensions are shown in millimeters (inches) TRR 1.60 (.063) 1.50 (.059) 4.10 (.161) 3.90 (.153) FEED DIRECTION 1.85 (.073) 1.60 (.063) 1.50 (.059) 11.60 (.457) 11.40 (.449) 1.65 (.065) 0.368 (.0145) 0.342 (.0135) 15.42 (.609) 15.22 (.601) 24.30 (.957) 23.90 (.941) TRL 1.75 (.069) 1.25 (.049) 10.90 (.429) 10.70 (.421) 4.72 (.136) 4.52 (.178) 16.10 (.634) 15.90 (.626) FEED DIRECTION 13.50 (.532) 12.80 (.504) 27.40 (1.079) 23.90 (.941) 4 330.00 (14.173) MAX. 60.00 (2.362) MIN. NOTES : 1. COMFORMS TO EIA-418. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION MEASURED @ HUB. 4. INCLUDES FLANGE DISTORTION @ OUTER EDGE. 30.40 (1.197) MAX. 26.40 (1.039) 24.40 (.961) 3 4 Data and specifications subject to change without notice. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. 04/05 10 www.irf.com Note: For the most current drawings please refer to the IR website at: http://www.irf.com/package/ IMPORTANT NOTICE The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”) . With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Infineon Technologies in customer’s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. For further information on the product, technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies office (www.infineon.com). WARNINGS Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.