IRL3803STRLPBF

PD-95101A IRL3803SPbF IRL3803LPbF • Lead-Free www.irf.com 1 12/9/04 IRL3803S/LPbF 2 www.irf.com IRL3803S/LPbF www.irf.com 3 IRL3803S/LPbF 4 www.irf.com IRL3803S/LPbF www.irf.com 5 IRL3803S/LPbF 6 www.irf.com IRL3803S/LPbF www.irf.com 7 IRL3803S/LPbF D2Pak Package Outline Dimensions are shown in millimeters (inches) 8 www.irf.com IRL3803S/LPbF TO-262 Package Outline Dimensions are shown in millimeters (inches) TO-262 Part Marking Information EXAMPLE : THIS IS AN IRL3103L LOT CODE 1789 AS SE MBL ED ON WW 19, 1997 IN THE AS SEMBLY LINE "C" Note: "P" in as sembly line pos ition indicates "Lead-Free" INT ERNATIONAL RECTIFIE R LOGO AS SE MBLY LOT CODE PART NUMBER DAT E CODE YEAR 7 = 1997 WE EK 19 LINE C OR INTE RNATIONAL RE CTIFIE R LOGO AS SEMBLY LOT CODE www.irf.com PART NUMBER DAT E CODE P = DE SIGNATE S LE AD-FREE PRODUCT (OPTIONAL) YEAR 7 = 1997 WE EK 19 A = ASS EMBLY SITE CODE 9 IRL3803S/LPbF D2Pak Tape & Reel Information Dimensions are shown in millimeters (inches) TRR 1.60 (.063) 1.50 (.059) 4.10 (.161) 3.90 (.153) FEED DIRECTION 1.85 (.073) 1.60 (.063) 1.50 (.059) 11.60 (.457) 11.40 (.449) 1.65 (.065) 0.368 (.0145) 0.342 (.0135) 15.42 (.609) 15.22 (.601) 24.30 (.957) 23.90 (.941) TRL 1.75 (.069) 1.25 (.049) 10.90 (.429) 10.70 (.421) 4.72 (.136) 4.52 (.178) 16.10 (.634) 15.90 (.626) FEED DIRECTION 13.50 (.532) 12.80 (.504) 27.40 (1.079) 23.90 (.941) 4 330.00 (14.173) MAX. 60.00 (2.362) MIN. NOTES : 1. COMFORMS TO EIA-418. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION MEASURED @ HUB. 4. INCLUDES FLANGE DISTORTION @ OUTER EDGE. 30.40 (1.197) MAX. 26.40 (1.039) 24.40 (.961) 3 4 Data and specifications subject to change without notice. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.12/04 10 www.irf.com Note: For the most current drawings please refer to the IR website at: http://www.irf.com/package/ IMPORTANT NOTICE The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”) . With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Infineon Technologies in customer’s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. For further information on the product, technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies office (www.infineon.com). WARNINGS Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.