IRS10752LPBF
µHVICTM
SOT-23 High-Side Gate Driver IC
Features
•
•
•
•
•
•
•
•
•
•
•
Description
Package Options
Applications
•
•
•
The IRS10752 is a high-side, single-channel
gate driver IC with 100V blocking and levelshifting capability. This allows for the gate driver
to be connected directly to the gate of a high-side
power MOSFET, while being controlled by the
low-side, ground potential circuitry. The IRS10752
includes a wide VCC supply range, UVLO
protection, and excellent immunity to harsh dv/dt
or –VS switching environments. IR’s HVIC
technology allows for these functions and features
to be realized in a 6-pin SOT-23 package.
Floating gate driver designed for bootstrap operation
Fully operational to +100 V
Excellent dv/dt immunity
Excellent negative VS transient immunity
Wide VCC range
UVLO on low-side and high-side
Schmitt-trigger input with internal pull-down
Output in phase with input
Excellent latch immunity on all inputs & outputs
RoHS compliant
6-pin SOT-23 package
High-side gate driver control
Pulse transformer replacement
General purpose switched mode power electronics
SOT23-6L
Typical Connection Diagram
100V
VCC
1
COM
2
IN
IN
3
IRS10752
VCC
VB
6
HO
5
VS
4
To Load
Ordering Information
Standard Pack
Base Part Number
Package Type
IRS10752LPBF
SOT-23-6L
1
Form
Quantity
Tape and Reel
3000
Orderable Part Number
IRS10752LTRPBF
January 4, 2017
IRS10752LPBF
Table of Contents
Page
Description
1
Ordering Information
1
Typical Connection Diagram
1
Absolute Maximum Ratings
3
Recommended Operating Conditions
3
Electrical Characteristics
4
Functional Block Diagram
5
Timing Diagram
6
Lead Definitions
7
Lead Assignments
7
Package Details: 6L-SOT23
9
Tape and Reel Details: 6L-SOT23
10
Part Marking Information
12
Qualification Information
13
2
January 4, 2017
IRS10752LPBF
Absolute Maximum Ratings
Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage
parameters are absolute voltages referenced to COM, all currents are defined positive into any pin. The thermal
resistance and power dissipation ratings are measured under board mounted and still air conditions.
Symbol
Definition
Min
Max
-0.3
120
Units
VB
High side floating absolute voltage
VS
High side floating supply offset voltage
VB - 20
VB + 0.3
VHO
High side floating gate drive output voltage
VS - 0.3
VB + 0.3
VCC
Low side and logic fixed supply voltage
-0.3
20
VIN
Logic input voltage
COM - 0.3
VCC + 0.3
VCC - 20
VCC + 0.3
---
50
V/ns
---
151
ºC/W
-55
150
---
300
COM
dVS/dt
RΘJA
Logic ground
High side floating supply offset voltage slew rate
Thermal resistance, junction to
6L-SOT-23
ambient
TJ
Junction temperature
TS
Storage temperature
TL
IC Pin temperature (soldering, 10 seconds)
V
ºC
Recommended Operating Conditions
For proper operation the device should be used within the recommended conditions.
Symbol
VB
Definition
High side floating absolute voltage
Min
Max
VS + 10
VS + 18
†
VS
High side floating supply offset voltage
VHO
High side floating gate drive output voltage
VS
VB
VCC
Low side and logic fixed supply voltage
10
18
VIN
Logic input voltage
COM
VCC
TJ
Junction temperature
-40
125
†
COM - 8
Units
100
V
ºC
Logic operational for VS of -8V to +100V. Logic state held for VS of -8V to –VBS.
3
January 4, 2017
IRS10752LPBF
Electrical Characteristics
VCC=15V, VBS=15V, CL=1000pF, and TA = 25 °C unless otherwise specified.
Symbol
Definition
Min
Typ
Max
Units
Test Conditions
Low Side Characteristics
VCCUV+
VCC supply UVLO positive-going
8.0
9.0
10.0
VCCUV-
VCC supply UVLO negative-going
7.0
8.0
9.0
Quiescent VCC supply current
---
100
---
VCC internal Zener clamp voltage
---
20.4
---
VIH
Logic “1” input voltage
---
---
2.2
VIL
Logic “0” input voltage
0.8
---
---
IIN+
Logic “1” input bias current
---
20
40
IIN-
Logic “0” input bias current
---
---
5
IQCC
VCC_CLAMP
V
µA
ICC = 5mA
V
µA
VIN = VCC
VIN = COM
High Side Characteristics
VBSUV+
VBS supply UVLO positive-going
8.0
9.0
10.0
VBSUV-
VBS supply UVLO negative-going
7.0
8.0
9.0
VBS_CLAMP
VBS internal Zener clamp voltage
---
20.4
---
VOH
High level output voltage (VB – HO)
---
0.8
1.4
VOL
Low level output voltage (HO – VS)
---
0.3
0.6
ILK
Offset supply leakage current
---
---
50
IQBS
Quiescent VBS supply current
---
80
---
V
IBS = 5mA
IO = 2mA
µA
VB = VS = 100V
VIN = VCC or COM
Gate Drive Characteristics
tON
Turn-on propagation delay
---
140
---
tOFF
Turn-off propagation delay
---
215
---
tRISE
Turn-on rise time
---
85
---
tFALL
Turn-off fall time
---
40
---
IO+
HO gate drive output source current
---
160
---
IO-
HO gate drive output sink current
---
240
---
4
VS = 0V
ns
VS = 100V
VS = 0V
mA
January 4, 2017
IRS10752LPBF
Functional Block Diagram
HV Well
6 VB
UVLO
Pulse
Filter
R Q
R
S
5 HO
VCC 1
4 VS
UVLO
IN 3
Pulse
Gen
COM 2
5
January 4, 2017
IRS10752LPBF
Timing Diagram
IN
50%
50%
tON
tOFF
tRISE
tFALL
90%
HO
6
10%
90%
10%
January 4, 2017
IRS10752LPbF
Pin Definitions
Pin
Symbol
Description
1
VCC
IC supply voltage
2
COM
IC power and signal ground
3
IN
Logic input
4
VS
High side floating supply offset voltage
5
HO
High side gate driver output
6
VB
High side floating supply voltage
Pin Assignments
VCC
COM
2
IN
3
IRS10752
1
VB
6
HO
5
VS
4
6-Lead SOT 23
7
January 4, 2017
IRS10752LPBF
Package Details: 6L-SOT23
8
January 4, 2017
IRS10752LPBF
Tape and Reel Details: 6L-SOT23
9
January 4, 2017
IRS10752LPBF
Tape and Reel Details: 6L-SOT23
10
January 4, 2017
IRS10752LPBF
Part Marking Information: 6 Lead SOT23
Top Marking
6
5
4
YW LC
1
2
Lot Code
3
Date Code
Bottom Marking
1
2
3
I
6
Part no.
11
IR Logo
5
4
Base Part Number
I
IRS10752LPBF
H
IRS20752LPBF
E
IRS25752LPBF
January 4, 2017
IRS10752LPBF
Qualification Information†
††
Qualification Level
Moisture Sensitivity Level
Machine Model
ESD
Human Body Model
IC Latch-Up Test
RoHS Compliant
Industrial
(per JEDEC JESD 47E)
Comments: This family of ICs has passed JEDEC’s
Industrial qualification. IR’s Consumer qualification level is
granted by extension of the higher Industrial level.
†††
MSL1
SOT-23
(per IPC/JEDEC J-STD-020C)
Class B
(per JEDEC standard EIA/JESD22-A115-A)
Class 1B
(per EIA/JEDEC standard JESD22-A114-B)
Class I, Level A
(per JESD78A)
Yes
†
††
Qualification standards can be found at International Rectifier’s web site http://www.infineon.com/
Higher qualification ratings may be available should the user have such requirements. Please contact your
International Rectifier sales representative for further information.
††† Higher MSL ratings may be available for the specific package types listed here. Please contact your
International Rectifier sales representative for further information.
Revision History
Comment
Date
01/04/2017
12
•
•
•
Updated "Infineon” logo –all pages.
Added disclaimer on last page.
Updated part marking information on page 11.
January 4, 2017
IRS10752LPBF
Published by
Infineon Technologies AG
81726 Munich, Germany
© Infineon Technologies AG 2016
All Rights Reserved.
IMPORTANT NOTICE
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics (“Beschaffenheitsgarantie”). With respect to any examples, hints or any typical values stated
herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims
any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of
intellectual property rights of any third party.
In addition, any information given in this document is subject to customer’s compliance with its obligations stated
in this document and any applicable legal requirements, norms and standards concerning customer’s products
and any use of the product of Infineon Technologies in customer’s applications.
The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of
customer’s technical departments to evaluate the suitability of the product for the intended application and the
completeness of the product information given in this document with respect to such application.
For further information on the product, technology, delivery terms and conditions and prices please contact your
nearest Infineon Technologies office (www.infineon.com).
WARNINGS
Due to technical requirements products may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies office.
Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized
representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications
where a failure of the product or any consequences of the use thereof can reasonably be expected to result in
personal injury.
13
January 4, 2017
很抱歉,暂时无法提供与“IRS10752LTRPBF”相匹配的价格&库存,您可以联系我们找货
免费人工找货