IRS21814MTRPBF

June 9, 2016 IRS21814MPBF HIGH- AND LOW-SIDE DRIVER Features            Product Summary Floating channel designed for bootstrap operation Fully operational to +600 V Tolerant to negative transient voltage, dV/dt immune Gate drive supply range from 10 V to 20 V Undervoltage lockout for both channels 3.3 V and 5 V input logic compatible Matched propagation delay for both channels Logic and power ground +/- 5 V offset Lower di/dt gate driver for better noise immunity Output source/sink current capability (min) 1.4 A/1.8 A Leadfree, RoHS compliant Topology High and Low Side Driver ≤ 600 V VOFFSET VOUT 10 V – 20 V Io+ & I o- (typical) 1.9 A &2.3 A tON & tOFF (typical) 180 ns & 220 ns Package Options MLPQ4x4 16- Leads (Without 2 leads) Typical Connection Up to 600V IR21814MPBF Vcc HIN LIN Vcc HIN LIN Vss Vss HO VB VS TO LOAD COM LO (Refer to Lead Assignments for correct pin configuration) This diagram shows electrical connections only. Please refer to our Application Notes and Design Tips for proper circuit board layout. www.irf.com © 2016 International Rectifier IRS21814MPBF Description The IRS21814MPBF is a high voltage, high speed power MOSFET and IGBT drivers with independent highand low-side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3 V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high-side configuration which operates up to 600 V. Feature Comparison: IRS2181(4)/IRS2183(4)/IRS2184(4) Part 2181 21814 2183 21834 2184 21844 Input Logic CrossConduction Prevention logic HIN/LIN no HIN/LIN yes IN/SD yes Qualification Information Dead-Time none Internal 500ns Programmable 0.4 – 5 us Internal 500ns Programmable 0.4 – 5 us Moisture Sensitivity Level Machine Model Human Body Model Charged Device Model IC Latch-Up Test RoHS Compliant Ton/Toff COM VSS/COM COM VSS/COM COM VSS/COM 180/220 ns 180/220 ns 680/270 ns † Qualification Level ESD Ground Pins †† Industrial (per JEDEC JESD 47) Comments: This IC has passed JEDEC’s Industrial qualification. IR’s Consumer qualification level is granted by extension of the higher Industrial level. ††† MSL2 MLPQ4x4 14L (per IPC/JEDEC J-STD-020) Class A (+/-150V) (per JEDEC standard JESD22-A115) Class 1B (+/-1000V) (per EIA/JEDEC standard EIA/JESD22-A114) Class III (+/-1000V) (per JEDEC standard JESD22-C101) Class II, Level A (per JESD78A) Yes † †† Qualification standards can be found at International Rectifier’s web site http://www.irf.com/ Higher qualification ratings may be available should the user have such requirements. Please contact your International Rectifier sales representative for further information. ††† Higher MSL ratings may be available for the specific package types listed here. Please contact your International Rectifier sales representative for further information. www.irf.com © 2016 International Rectifier 2 IRS21814MPBF Absolute Maximum Ratings Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Symbol Definition Min Max Units VB High-side floating absolute voltage -0.3 625 VS High-side floating supply offset voltage VB - 25 VB + 0.3 VHO High-side floating output voltage VS - 0.3 VB + 0.3 VCC Low-side and logic fixed supply voltage -0.3 20 † VLO Low-side output voltage -0.3 VCC + 0.3 VIN Logic input voltage (HIN &LIN) VSS -0.3 VCC + 0.3 VSS Logic ground VCC - 20 VCC + 0.3 Allowable offset supply voltage transient — 50 V/ns Package power dissipation @ TA ≤ 25°C — 2.08 W Thermal resistance, junction to ambient — 36 °C/W 150 150 300 °C dVS/dt PD RthJA TJ Junction temperature — TS Storage temperature -50 TL Lead temperature (soldering, 10 seconds) — † All supplies are fully tested at 25 V and an internal 20 V clamp exists for each supply V Recommended Operating Conditions The input/output logic timing diagram is shown in figure 1. For proper operation the device should be used within the recommended conditions. The VS and VSS offset rating are tested with all supplies biased at 15 V differential. Symbol Definition Min Max Units VB High-side floating supply absolute voltage VS +10 VS +20 VS High-side floating supply offset voltage †† 600 VHO High-side floating output voltage VS VB VCC Low-side and logic fixed supply voltage 10 20 V VLO Low-side output voltage 0 VCC VIN Logic input voltage VSS VCC VSS Logic ground -5 5 TA Ambient temperature -40 125 °C †† Logic operational for VS of -5 V to +600 V. Logic state held for VS of -5 V to –VBS. (Please refer to the Design Tip DT97-3 for more details). www.irf.com © 2016 International Rectifier 3 IRS21814MPBF Dynamic Electrical Characteristics VBIAS (VCC, VBS) = 15 V, VSS = COM, CL = 1000 pF,TA = 25°C unless otherwise specified. Symbol Definition Min Typ Max Units Test Conditions ton Turn-on propagation delay — 180 270 VS = 0 V VS = 0 V or 600 V toff Turn-off propagation delay — 220 330 ns MT Delay matching, HS & LS turn-on/off — — 35 tr Turn-on rise time — 40 60 VS = 0 V t f Turn-off fall time — 20 35 Static Electrical Characteristics VBIAS (VCC, VBS) = 15 V, VSS = COM, TA = 25°C unless otherwise specified. The VIL, VIH and IIN parameters are referenced to VSS/COM and are applicable to the respective input leads: HIN and LIN. The V O, IO and Ron parameters are referenced to COM and are applicable to the respective output leads: HO and LO. Symbol VIH VIL VOH VOL ILK IQBS IQCC IIN+ IINVCCUV+ VBSUV+ VCCUVVBSUVVCCUVH VBSUVH Definition Min Typ Max Units Test Conditions Logic “1” input voltage Logic “0” input voltage High level output voltage, VBIAS - VO Low level output voltage, VO Offset supply leakage current Quiescent VBS supply current Quiescent VCC supply current Logic “1” input bias current Logic “0” input bias current VCC and VBS supply undervoltage positive going threshold VCC and VBS supply undervoltage negative going threshold 2.5 — — — — 0.8 — — 1.4 — — 0.2 — — 50 20 60 150 50 120 240 — 25 60 — — 1.0 8.0 8.9 9.8 7.4 8.2 9.0 VCC and VBS supply undervoltage Hysteresis 0.3 0.7 — IO+ Output high short circuit pulsed current 1.4 1.9 — IO- Output low short circuit pulsed current 1.8 2.3 — V µA VIN = 0 V or 5 V VIN = 5 V VIN = 0 V V A www.irf.com VCC = 10 V to 20 V VCC = 10 V to 20 V IO = 0 mA IO = 20 mA VB = VS = 600 V VO = 0 V, PW ≤ 10 us VO = 15 V, PW ≤ 10 us © 2016 International Rectifier 4 IRS21814MPBF Functional Block Diagrams: IRS21814 VB UV DETECT IRS21814 R HV LEVEL SHIFTER HIN VSS/ COM LEVEL SHIFT R PULSE FILTER Q HO S PULSE GENERATOR VS VCC UV DETECT LO LIN VSS / COM LEVEL SHIFT DELAY COM VSS www.irf.com © 2016 International Rectifier 5 IRS21814MPBF Input/Output Pin Equivalent Circuit Diagrams: IRS21814 VB ESD Diode VCC 25V HO ESD Diode HIN LIN ESD Diode VS RESD RPD 600V ESD Diode VCC ESD Diode VSS LO 25V 25V ESD Diode COM VSS www.irf.com © 2016 International Rectifier 6 IRS21814MPBF Lead Definitions: IRS21814MPBF PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Symbol LIN VSS NC COM LO NC VCC NC NC NC VS HO VB NC NC HIN Description Logic input for low-side driver output (LO), in phase Logic ground No Connection Low-side return Low-side gate drive output No Connection Low-side and logic fixed supply No Connection No Connection No Connection (removed lead) High-side floating supply return High-side gate drive output High-side floating supply No Connection No Connection (removed lead) Logic input for high-side gate driver output (HO), in phase HIN NC VB Lead Assignments: 16 14 13 LIN 1 12 HO 17 VSS 2 11 VS NC 3 4 6 7 8 NC LO 5 VCC 9 NC COM NC IRS21814MPBF Central exposed pad (17) has to be connected to COM for better electrical performance. www.irf.com © 2016 International Rectifier 7 IRS21814MPBF Application Information and Additional Details HIN LIN HO LO Figure 1. Input/Output Timing Diagram 50% HIN LIN ton 50% toff tr 90% HO LO tf 90% 10% 10% Figure 2. Switching Time Waveform Definitions 50% HIN LIN LO 50% HO 10% MT MT 90% LO HO Figure 3. Delay Matching Waveform Definitions www.irf.com © 2016 International Rectifier 8 IRS21814MPBF Parameter Temperature Trends www.irf.com © 2016 International Rectifier 9 IRS21814MPBF www.irf.com © 2016 International Rectifier 10 High Level Output Voltage (V) IRS21814MPBF 2.00 Max. 1.50 1.00 0.50 0.00 -50 -25 0 25 50 75 100 125 o Temperature ( C) www.irf.com © 2016 International Rectifier 11 IRS21814MPBF www.irf.com © 2016 International Rectifier 12 IRS21814MPBF www.irf.com © 2016 International Rectifier 13 IRS21814MPBF www.irf.com © 2016 International Rectifier 14 IRS21814MPBF www.irf.com © 2016 International Rectifier 15 IRS21814MPBF www.irf.com © 2016 International Rectifier 16 IRS21814MPBF www.irf.com © 2016 International Rectifier 17 IRS21814MPBF Package Details: MLPQ 4x4 -16L www.irf.com © 2016 International Rectifier 18 IRS21814MPBF Tape and Reel Details: MLPQ 4x4 www.irf.com © 2016 International Rectifier 19 IRS21814MPBF Part Marking Information Pin 1 Identifier IR logo Part number S21814M Assembly site Code Per SCOP 200-02 ?YWW ? Date code XXXXX ? MARKING CODE P Lead Free Released Non-Lead Free Released - Lot Code (Prod mode – 4 digit SPN code) Ordering Information Base Part Number IRS21814 Package Type MLPQ 4x4-16L Standard Pack Complete Part Number Form Quantity Tube/Bulk 92 IRS21814MPBF Tape and Reel 3,000 IRS21814MTRPBF The information provided in this document is believed to be accurate and reliable. However, International Rectifier assumes no responsibility for the consequences of the use of this information. International Rectifier assumes no responsibility for any infringement of patents or of other rights of third parties which may result from the use of this information. No license is granted by implication or otherwise under any patent or patent rights of International Rectifier. The specifications mentioned in this document are subject to change without notice. This document supersedes and replaces all information previously supplied. For technical support, please contact IR’s Technical Assistance Center http://www.irf.com/technical-info/ WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 www.irf.com © 2016 International Rectifier 20 IRS21814MPBF Revision History Date 09/24/09 03/24/2010 6/9/2016 Comment Converted from existing data sheet; changing only package information Included Qual Info Page Add note regarding exposed pad, Fix typo www.irf.com © 2016 International Rectifier 21