IRS4428STRPBF

February 28, 2011 Datasheet No – 97481 IRS4426/IRS4427/IRS4428 DUAL LOW SIDE DRIVER Product Summary Features • • • • • • • Gate drive supply range from 6 V to 20 V CMOS Schmitt-triggered inputs 3.3V and 5V logic compatible Two independent gate drivers Matched propagation delay for both channels Outputs in phase with inputs Leadfree, RoHS compliant Typical Applications • • General Purpose Dual Low Side Driver DC-DC converters Topology General Driver VOUT 6V - 20V Io+ & I o- (typical) 2.3A & 3.3A ton & toff (typical) 50ns & 50ns Package Type SOIC8N Typical Connection Diagram www.irf.com © 2010 International Rectifier IRS4426/IRS4427/IRS4428 Table of Contents Page Typical connection diagram 1 Description 3 Qualification Information 4 Absolute Maximum Ratings 5 Recommended Operating Conditions 5 Static Electrical Characteristics 6 Dynamic Electrical Characteristics 7 Functional Block Diagram 8 Input/Output Pin Equivalent Circuit Diagram 10 Lead Definitions 11 Lead Assignments 11 Application Information and Additional Details 12 Package Details: SOIC8 14 Package Details: SOIC8, Tape and Reel 15 Part Marking Information 16 Ordering Information 17 www.irf.com © 2010 International Rectifier 2 IRS4426/IRS4427/IRS4428 Description The IRS4426/IRS4427/IRS4428 are low voltage, high speed power MOSFET and IGBT drivers. Proprietary latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays between two channels are matched. www.irf.com © 2010 International Rectifier 3 IRS4426/IRS4427/IRS4428 Qualification Information† Qualification Level Moisture Sensitivity Level Machine Model ESD Human Body Model IC Latch-Up Test RoHS Compliant † †† ††† Industrial†† Comments: This family of ICs has passed JEDEC’s Industrial qualification. IR’s Consumer qualification level is granted by extension of the higher Industrial level. MSL2††† 260°C (per IPC/JEDEC J-STD-020) Class B (per JEDEC standard JESD22-A115) Class 3A (per EIA/JEDEC standard EIA/JESD22-A114) Class I, Level A (per JESD78) Yes Qualification standards can be found at International Rectifier’s web site http://www.irf.com/ Higher qualification ratings may be available should the user have such requirements. Please contact your International Rectifier sales representative for further information. Higher MSL ratings may be available for the specific package types listed here. Please contact your International Rectifier sales representative for further information. www.irf.com © 2010 International Rectifier 4 IRS4426/IRS4427/IRS4428 Absolute Maximum Ratings Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Symbol Definition Min Max VCC Fixed supply voltage -0.3 25 VO Output voltage -0.3 VCC + 0.3 Logic input voltage Package power dissipation @ TA ≤ 25°C Thermal resistance, junction to ambient Junction temperature Storage temperature Lead temperature (soldering, 10 seconds) -0.3 — — — -55 — VCC + 0.3 0.625 200 150 150 300 VIN PD RthJA TJ TS TL Units V W °C/W °C Recommended Operating Conditions For proper operation, the device should be used within the recommended conditions. All voltage parameters are absolute voltages referenced to COM unless otherwise stated in the table. The offset rating is tested with supply of VCC = 15V. Symbol VCC VO VIN TA Definition Min 6 0 0 -40 Fixed supply voltage Output voltage Logic input voltage Ambient temperature www.irf.com Max 20 VCC VCC 125 Units V °C © 2010 International Rectifier 5 IRS4426/IRS4427/IRS4428 Static Electrical Characteristics VCC = 15V, TA = 25°C unless otherwise specified. The VIN, and IIN parameters are referenced to COM and are applicable to input leads: INA and INB. The VO and IO parameters are referenced to COM and are applicable to the output leads: OUTA and OUTB. Symbol VOH VOL Definition Min Typ Max Units Logic “0” input voltage (OUTA = LO, OUTB = LO) (IRS4426) Logic “1” input voltage (OUTA=HI,OUTB=HI) 2.5 — — V (IRS4427) Logic “0” input voltage (OUTA=LO), Logic “1” input voltage (OUTB=HI) (IRS4428) Logic “1” input voltage (OUTA = HI, OUTB = HI) (IRS4426) Logic “0” input voltage (OUTA=LO,OUTB=LO) — — 0.8 (IRS4427) V Logic “1” input voltage (OUTA=HI), Logic “0” input voltage (OUTB=LO) (IRS4428) High level output voltage, VBIAS -VO — — 1.4 Low level output voltage, VO — — 0.15 IIN+ Logic “1” input bias current VIH VIL — 5 15 µA IIN- Logic “0” input bias current -30 -10 — IQCC Quiescent VCC supply current — 100 200 IO+ Output high short circuit pulsed current — 2.3 — A IO- Output low short circuit pulsed current — www.irf.com 3.3 — Test Conditions IO = 0 mA IO = 20 mA VIN = 0V (IRS4426) VIN = 5V (IRS4427) VINA = 0V (IRS4428) VINB = 5V (IRS4428) VIN = 5V (IRS4426) VIN = 0V (IRS4427) VINA = 5V (IRS4428) VINB = 0V (IRS4428) VIN = 0V or 5V VO = 0V, VIN = COM (IRS4426) VO = 0V, VIN = 5V (IRS4427) VO = 0V, VINA = COM (IRS4428) VO = 0V, VINB = 5V (IRS4428) VO = 15V, VIN = 5V (IRS4426) VO = 15V, VIN = COM (IRS4427) VO = 15V, VINA = 5V (IRS4428) VO = 15V, VINB = COM (IRS4428) © 2010 International Rectifier 6 IRS4426/IRS4427/IRS4428 Dynamic Electrical Characteristics VCC = 15V, TA = 25°C, and CL = 1000pF unless otherwise specified. Symbol ton toff tr tf Definition Turn-on propagation delay Turn-off propagation delay Turn-on rise time Turn-off fall time Min Typ Max Units — 50 95 — 50 95 ns — 25 55 — 25 55 www.irf.com Test Conditions Figure 2 © 2010 International Rectifier 7 IRS4426/IRS4427/IRS4428 Functional Block Diagram VCC 5V PREDRV INA 5V INB OUTA DRV VCC PREDRV DRV OUTB COM IRS4426S www.irf.com © 2010 International Rectifier 8 IRS4426/IRS4427/IRS4428 5V INA VCC PREDRV OUTA DRV VCC INB PREDRV DRV OUTB COM IRS4428S www.irf.com © 2010 International Rectifier 9 IRS4426/IRS4427/IRS4428 Input/Output Pin Equivalent Circuit Diagrams IRS4426 IRS4426 / IRS4427 / IRS4428 IRS4427 IRS4428 IRS4428 www.irf.com © 2010 International Rectifier 10 IRS4426/IRS4427/IRS4428 Lead Definitions PIN Symbol 1 NC 2 INA 3 GND 4 INB 5 6 7 8 OUTB VCC OUTA NC Description No connection Logic input for gate driver output (OUTA), out of phase (IRS4426, IRS4428), in phase (IRS4427) Ground Logic input for gate driver output (OUTB), out of phase (IRS4426), in phase (IRS4427, IRS4428) Gate drive output B Supply voltage Gate drive output A No connection Lead Assignments www.irf.com © 2010 International Rectifier 11 IRS4426/IRS4427/IRS4428 Application Information and Additional Details INA (IRS4426, IRS4428) INB (IRS4426) INA (IRS4427) INB (IRS4427, IRS4428) OUTA OUTB Figure 1: Input/output Timing Diagram INAIRS4428) INA (IRS4426, INB INB (IRS4426) 50% 50% ton toff 50% INA (IRS4427) INB (IRS4427, IRS4428) 50% INB ton toff tr 90% OUTA OUTB OUTA OUTB tf 90% 10% 10% Figure 2: Switching Time Waveform Definitions www.irf.com © 2010 International Rectifier 12 IRS4426/IRS4427/IRS4428 IRS4426 IRS4427 IRS4428 Figure 3: Switching Time Test Circuit www.irf.com © 2010 International Rectifier 13 IRS4426/IRS4427/IRS4428 Package Details, SOIC8N www.irf.com © 2010 International Rectifier 14 IRS4426/IRS4427/IRS4428 Package details: SOIC8N, Tape and Reel LOADED TAPE FEED DIRECTION A B H D F C NOTE : CONTROLLING DIMENSION IN MM E G CARRIER TAPE DIMENSION FOR 8SOICN Metric Imperial Code Min Max Min Max A 7.90 8.10 0.311 0.318 B 3.90 4.10 0.153 0.161 C 11.70 12.30 0.46 0.484 D 5.45 5.55 0.214 0.218 E 6.30 6.50 0.248 0.255 F 5.10 5.30 0.200 0.208 G 1.50 n/a 0.059 n/a H 1.50 1.60 0.059 0.062 F D C B A E G H REEL DIMENSIONS FOR 8SOICN Metric Code Min Max A 329.60 330.25 B 20.95 21.45 C 12.80 13.20 D 1.95 2.45 E 98.00 102.00 F n/a 18.40 G 14.50 17.10 H 12.40 14.40 Imperial Min Max 12.976 13.001 0.824 0.844 0.503 0.519 0.767 0.096 3.858 4.015 n/a 0.724 0.570 0.673 0.488 0.566 www.irf.com © 2010 International Rectifier 15 IRS4426/IRS4427/IRS4428 Part Marking Information www.irf.com © 2010 International Rectifier 16 IRS4426/IRS4427/IRS4428 Ordering Information Standard Pack Base Part Number Package Type IRS4426S SOIC8N IRS4427S SOIC8N IRS4428S SOIC8N Complete Part Number Form Quantity Tube/Bulk 95 IRS4426SPBF Tape and Reel 2500 IRS4426STRPBF Tube/Bluk 95 IRS4427SPBF Tape and Reel 2500 IRS4427STRPBF Tube/Bulk 95 IRS4428SPBF Tape and Reel 2500 IRS4428STRPBF The information provided in this document is believed to be accurate and reliable. However, International Rectifier assumes no responsibility for the consequences of the use of this information. International Rectifier assumes no responsibility for any infringement of patents or of other rights of third parties which may result from the use of this information. No license is granted by implication or otherwise under any patent or patent rights of International Rectifier. The specifications mentioned in this document are subject to change without notice. This document supersedes and replaces all information previously supplied. For technical support, please contact IR’s Technical Assistance Center http://www.irf.com/technical-info/ WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 www.irf.com © 2010 International Rectifier 17