MB39C031-EVB-01

MB39C031-EVB-01 2ch Buck DC/DC + LDO with I2C Interface Evaluation Board Operation Guide Doc. No. 002-08673 Rev. *C Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 www.cypress.com Copyrights © Cypress Semiconductor Corporation, 2014-2018. This document is the property of Cypress Semiconductor Corporation and its subsidiaries, including Spansion LLC (“Cypress”). This document, including any software or firmware included or referenced in this document (“Software”), is owned by Cypress under the intellectual property laws and treaties of the United States and other countries worldwide. Cypress reserves all rights under such laws and treaties and does not, except as specifically stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other intellectual property rights. If the Software is not accompanied by a license agreement and you do not otherwise have a written agreement with Cypress governing the use of the Software, then Cypress hereby grants you a personal, nonexclusive, nontransferable license (without the right to sublicense) (1) under its copyright rights in the Software (a) for Software provided in source code form, to modify and reproduce the Software solely for use with Cypress hardware products, only internally within your organization, and (b) to distribute the Software in binary code form externally to end users (either directly or indirectly through resellers and distributors), solely for use on Cypress hardware product units, and (2) under those claims of Cypress’s patents that are infringed by the Software (as provided by Cypress, unmodified) to make, use, distribute, and import the Software solely for use with Cypress hardware products. Any other use, reproduction, modification, translation, or compilation of the Software is prohibited. TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE OR ACCOMPANYING HARDWARE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No computing device can be absolutely secure. Therefore, despite security measures implemented in Cypress hardware or software products, Cypress does not assume any liability arising out of any security breach, such as unauthorized access to or use of a Cypress product. In addition, the products described in these materials may contain design defects or errors known as errata which may cause the product to deviate from published specifications. To the extent permitted by applicable law, Cypress reserves the right to make changes to this document without further notice. Cypress does not assume any liability arising out of the application or use of any product or circuit described in this document. Any information provided in this document, including any sample design information or programming code, is provided only for reference purposes. It is the responsibility of the user of this document to properly design, program, and test the functionality and safety of any application made of this information and any resulting product. Cypress products are not designed, intended, or authorized for use as critical components in systems designed or intended for the operation of weapons, weapons systems, nuclear installations, life-support devices or systems, other medical devices or systems (including resuscitation equipment and surgical implants), pollution control or hazardous substances management, or other uses where the failure of the device or system could cause personal injury, death, or property damage (“Unintended Uses”). A critical component is any component of a device or system whose failure to perform can be reasonably expected to cause the failure of the device or system, or to affect its safety or effectiveness. Cypress is not liable, in whole or in part, and you shall and hereby do release Cypress from any claim, damage, or other liability arising from or related to all Unintended Uses of Cypress products. You shall indemnify and hold Cypress harmless from and against all claims, costs, damages, and other liabilities, including claims for personal injury or death, arising from or related to any Unintended Uses of Cypress products. Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, WICED, PSoC, CapSense, EZ-USB, F-RAM, and Traveo are trademarks or registered trademarks of Cypress in the United States and other countries. For a more complete list of Cypress trademarks, visit cypress.com. Other names and brands may be claimed as property of their respective owners. Arm and Cortex are registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere. 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 2 Preface This manual explains how to use the evaluation board. Be sure to read this manual before using the product. For this product, please consult with sales representatives or support representatives. Handling and use Handling and use of this product and notes regarding its safe use are described in the manuals. Follow the instructions in the manuals to use this product. Keep this manual at hand so that you can refer to it anytime during use of this product. Notice on this document All information included in this document is current as of the date it is issued. Such information is subject to change without any prior notice. Please confirm the latest relevant information with the sales representatives. 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 3 Cautions Caution of the products described in this document The following precautions apply to the product described in this manual. WARNING Electric shock, Damage Electric shock, Damage CAUTION Cuts, Damage Indicates a potentially hazardous situation which could result in death or serious injury and/or a fault in the user’s system if the product is not used correctly. Before performing any operation described in this manual, turn off all the power supplies to the system. Performing such an operation with the power on may cause an electric shock or device fault. Once the product has been turned on, do not touch any metal part of it. Doing so may cause an electric shock or device fault. Indicates the presence of a hazard that may cause a minor or moderate injury, damages to this product or devices connected to it, or may cause to lose software resources and other properties such as data, if the device is not used appropriately. Before moving the product, be sure to turn off all the power supplies and unplug the cables. Watch your step when carrying the product. Do not use the product in an unstable location such as a place exposed to strong vibration or a sloping surface. Doing so may cause the product to fall, resulting in an injury or fault. The product contains sharp edges that are left unavoidably exposed, such as jumper plugs. Cuts Damage Handle the product with due care not to get injured with such pointed parts. Do not place anything on the product or expose the product to physical shocks. Do not carry the product after the power has been turned on. Doing so may cause a malfunction due to overloading or shock. Damage Since the product contains many electronic components, keep it away from direct sunlight, high temperature, and high humidity to prevent condensation. Do not use or store the product where it is exposed to much dust or a strong magnetic or electric field for an extended period of time. Inappropriate operating or storage environments may cause a fault. Use the product within the ranges given in the specifications. Damage Operation over the specified ranges may cause a fault. Damage To prevent electrostatic breakdown, do not let your finger or other object come into contact with the metal parts of any of the connectors. Before handling the product, touch a metal object (such as a door knob) to discharge any static electricity from your body. 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 4 Cautions Damage When turning the power on or off, follow the relevant procedure as described in this document. Before turning the power on, in particular, be sure to finish making all the required connections. Furthermore, be sure to configure and use the product by following the instructions given in this document. Using the product incorrectly or inappropriately may cause a fault. Damage Always turn the power off before connecting or disconnecting any cables from the product. When unplugging a cable, unplug the cable by holding the connector part without pulling on the cable itself. Pulling the cable itself or bending it may expose or disconnect the cable core, resulting in a fault. Damage Because the product has no casing, it is recommended that it be stored in the original packaging. Transporting the product may cause a damage or fault. Therefore, keep the packaging materials and use them when re-shipping the product. 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 5 Contents 1. Description ..................................................................................................................................................................... 7 2. Evaluation Board Specification .................................................................................................................................... 8 3. PIN Descriptions ............................................................................................................................................................ 9 3.1 3.2 4. Setup and Verification ................................................................................................................................................. 12 4.1 4.2 4.3 4.4 5. Input/output Pin Descriptions ................................................................................................................................. 9 Jumper, Switch descriptions ................................................................................................................................ 10 Contents in a package ......................................................................................................................................... 12 Evaluation with CTL (*1) switch ........................................................................................................................... 13 Evaluation with I2C control ................................................................................................................................... 14 4.3.1 PC Setup ................................................................................................................................................ 14 4.3.2 Operation check...................................................................................................................................... 15 4.3.3 How to use I2C communication GUI ....................................................................................................... 16 Specification of MB39C031 ................................................................................................................................. 17 Component and Wiring Layout .................................................................................................................................. 18 5.1 5.2 Component Layout .............................................................................................................................................. 18 Wiring layout ........................................................................................................................................................ 19 6. Circuit Schematic ........................................................................................................................................................ 23 7. Component List ........................................................................................................................................................... 25 8. Evaluation Board Picture ............................................................................................................................................ 31 9. Ordering Information ................................................................................................................................................... 33 Revision History ................................................................................................................................................................... 34 Document Revision History ........................................................................................................................................... 34 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 6 1. Description The MB39C031-EVB-01 is the evaluation board for 2ch Buck DC/DC + 1ch LDO, MB39C031. This board implements MB39C031: Option-code 342, and output preset voltage DD1:1.2V, DD2:1.8V, LDO:3.3V or selectable voltage controlled by I2C communication. This board implements our MCU : FM3(MB9AF312K) and can select the soft-start time, ON/OFF sequence, PFM/PWM mode easily with I2C communication using windows PC and prepared software. Figure 1-1. Board Outline 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 7 2. Evaluation Board Specification Table 2-1. Evaluation Board Specification Item Symbol Min Typ Max Unit Input voltage VIN 2.5 3.6 5.5 V Output voltage Vo1 1.19 1.20 1.21 V Output current Io1 - - 1400 mA Output voltage Vo2 1.78 1.80 1.82 V Output current Io2 - - 600 mA Output voltage LDO 3.24 3.30 3.36 V Output current Io3 - - 250 mA Board size : 80mm × 80mm 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 8 3. PIN Descriptions 3.1 Input/output Pin Descriptions Table 3-1. Input/output Pin Descriptions Block Pin symbol Vo1 DD1 DD2 LDO CTL ERR 2 IC COMMON MCU I/O O Function description DD1 output terminal PG1 O DD1 POWERGOOD output monitor terminal Vo1_GND O DD1 ground terminal Vo2 O DD2 output terminal PG2 O DD2 POWERGOOD output monitor terminal Vo2_GND O DD2 ground terminal LDO O LDO output terminal PGL O LDO POWERGOOD output monitor terminal LDO_GND O LDO ground terminal CTL1 I DD1 control terminal CTL2 I DD2 control terminal CTLL I LDO control terminal CTLMAIN I Control terminal for common block and MCU block ERR O ERR signal output terminal VCCI2C I Power supply terminal for I C. 2 2 SCL I I C clock terminal SDA I/O I C data I/O terminal ADDSEL I Switch terminal for slave address VIN I Control circuit block power supply terminal VREF O Reference voltage (2.4V) output terminal VR O Reference voltage (0.6V) output terminal GND - Control circuit block ground terminal VBUS O VBUS output monitor 3R3V O 3R3V output monitor GND_1 - GND for MCU GND_2 - GND for MCU 2 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 9 PIN Descriptions 3.2 Jumper, Switch descriptions Table 3-2. Jumper, Switch Descriptions Jumper, Initial Description Switch setting JP1 Short VIN terminal and PVCC1 pin (power of DD1 block) JP2 Short Vo1 terminal and L1 inductor Short JP3 Short VIN terminal and R1 (Pull-up resistor for PG1 pin) Short JP4 Short VIN terminal and PVCC2 pin (power of DD2 block) Short JP5 Short Vo2 terminal and L2 inductor Short JP6 Short VIN terminal and R2 (Pull-up resistor for PG2 pin) Short JP7 Short VIN terminal and PVCCL pin (power of LDO block) Short JP8 Short VIN terminal and R3 (Pull-up resistor for PGL pin) Short JP9 Short VIN terminal and R4 (Pull-up resistor for ERR pin) Short JP10 back side Short VIN terminal and VCC_1 pin (power of common block) Short JP11 back side Short VIN terminal and VCC_2 pin (power of common block) Short JP12 Short 3R3V terminal and VCCI2C pin Short JP13 Short SCL terminal and SCL pin Short JP14 Short SDA terminal and SDA pin Short JP15 Short SW1 and ADDSEL pin Short JP16 Short SW1 and CTLMAIN pin Short JP17 Short SW1 and CTL1 pin Short JP18 Short SW1 and CTL2 pin Short JP19 Short SW1 and CTLL pin Short JP101 back side Short USB ID and MCU I/O port (30 pin) Short JP102 022 : 3.3V is supplied to 3R3V from MB39C022G LDO 031 : 3.3V is supplied to 3R3V from MB39C031 LDO Short 022 1 : ADDSEL=H at ON, ADDSEL=OPEN at OFF 2 : CTLMAIN=H at ON, CTLMAIN=OPEN at OFF 3 : CTL1=H at ON, CTL1=OPEN at OFF SW1 4 : CTL2=H at ON, CTL2=OPEN at OFF Short 5 : CTLL=H at ON, CTLL=OPEN at OFF 6 : Unused SW101 Reset push switch for MCU - SW102 Test switch for MCU OFF 1 : SCL pin CN1 2 : SDA pin 3 : GND pin - 4 : VCCI2C pin 1,7 : PG2 pin 2,4 : CTLL pin CN2 3,9 : PG1 pin 5,11 : PGL pin - 6,8 : CTL1 pin 10,12 : CTL2 pin 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 10 PIN Descriptions Jumper, Initial Description Switch setting CN101 USB connector - CN102 JTAG connector for MCU - CN103 Expansion serial connector - CN104 Mode connector for MCU - 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 11 4. Setup and Verification 4.1 Contents in a package No. Contents Description Quantity Notes 1 MB39C031-EVBSK-01 Power management IC evaluation board 1 - 2 USB cable USB to USB mini B cable 1 - 1 2 [Required item for evaluation of power block]  MB39C031-EVB-01  2 [Using items for evaluation with I C control]  MB39C031-EVB-01 1pic  USB cable 1pic  PC installed Windows7 or later OS 1pic 1pic 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 12 Setup and Verification 4.2 Evaluation with CTL (*1) switch MB39C031 preset value can be evaluated with stabilized power supply. *1: CTLMAIN, CTL1, CTL2, CTLL 1. 3.6V is applied to VIN terminal. 2. CTLMAIN,CTL1,CTL2,CTLL switch are tern on 3. Vo1:1.2V, Vo2:1.8V, LDO:3.3V is output. Figure 4-1. For Control Switch Evaluation 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 13 Setup and Verification 4.3 Evaluation with I2C control All setting of MB39C031 can be evaluated with Windows PC connected to USB port by I2C communication GUI. 4.3.1 PC Setup 1. Unpack the driver file to a folder of PC running Windows 7 or later version OS, and run install.bat file. 2. Connect MB39C031-EVB-01 to PC using USB cable. 3. After installed a device, open the device manager and confirm the new COM port. Start menu → Control panel → Device manager 4. Run MB39C031_I2C.exe 5. Click "PORT SEARCH" at "COM PORT SELECT" field and select "SIL Virtual Communications Port (COMxx) " 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 14 Setup and Verification 6. 4.3.2 Please unplug the USB cable after setup. Operation check 1. 3.6V is applied to VIN terminal. 2. CTLMAIN switch is turned on. 3. USB cable is connected. 4. Run I2C communication software and click the box of ON/OFF field Click the WRITE DATA button. 5. 5. Vo1, Vo2 and LDO are output by software settings Figure 4-2. For I2C control evaluation 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 15 Setup and Verification 4.3.3 How to use I2C communication GUI 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 16 Setup and Verification 4.4 Specification of MB39C031 MB39C031-EVB-01 is preset the following output voltage and soft-start time. Table 4-1. MB39C031(Option code : 342) Specification 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 17 5. Component and Wiring Layout 5.1 Component Layout Figure 5-1. Component Layout (Layer 1) 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 18 Component and Wiring Layout Figure 5-2. Component Layout (Layer 6) 5.2 Wiring layout Figure 5-3. Wiring layout (layer 1) 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 19 Component and Wiring Layout Figure 5-4. Wiring Layout (Layer 2) Figure 5-5. Wiring Layout (Layer 3) 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 20 Component and Wiring Layout Figure 5-6. Wiring Layout (Layer 4) Figure 5-7. Wiring Layout (Layer 5) 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 21 Component and Wiring Layout Figure 5-8. Wiring Layout (Layer 6) 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 22 6. Circuit Schematic Figure 6-1. Circuit schematic for power block M1 VIN JP1 R5 0Ω 6 IN1 PVCC1 LX1 5 4 C1 4.7μF L1 Vo1_s JP2 Vo1 1.5μH C2 C3 10μF PGND1 PG1 Vo1_GND 3 R1 2 JP3 100kΩ PG1 VIN R6 VIN 0Ω VIN 16 IN2 PVCC2 18 C4 4.7μF L2 Vo2_s JP5 Vo2 1.5μH C5 C6 10μF C208 C207 C206 C205 C204 C203 C202 C201 LX2 JP4 17 PGND2 PG2 GND Vo2_GND 19 GND R2 20 JP6 100KΩ PG2 VIN JP7 PVCCL R13 C7 4.7μF LDO 4 PIN4 LDO 25 C8 LDO_s 3 JP12 PIN3 3R3V 2 PIN2 VCCI2C 1 PIN1 PH-1x4SGRG R7 JP13 SCL SW1 SCL ADDSEL 12 10 7 JP17 3 3 VIN JP10 8 ADDSEL C10 7 0.1μF JP11 28 CTLMAIN 6 8 9 C11 10 0.1μF 11 12 CTL1 9 1 JP18 4 CTL1 VR 14 C12 VR 0.47μF 10kΩ CTL2 R12 PIN1 4 10kΩ R11 1 5 10kΩ R10 JP9 100kΩ SDA VCC_2 CTLMAIN 27 ERR VCC_1 JP16 2 LDO_GND CN2 R4 ERR 2.2kΩ 11 11 031_LDO PGL JP15 1 JP8 100kΩ 2 SDA 12 R3 24 C9 VIN 10 R8 JP14 SDA 9 PGL VCCI2C 4.7μF 2.2kΩ SCL VIN R9 26 10kΩ CN1 8 5 7 6 21 JP19 CTL2 VREF C13 PIN3 PIN4 PIN5 PIN6 PIN7 PIN8 PIN9 PIN10 PIN11 PIN12 PH-2x6SGRG VREF 0.1μF 29 0.01μF C16 GND_2 CTLL EP C15 22 23 0.01μF 13 CTLL C14 GND_1 10kΩ DMS-6H 15 PIN2 MB39C031 0.01μF C17 0.01μF 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 23 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 7 8 9 3 4 5 6 1 2 10kΩ D101 UX60SC_MB_5ST_GND2 Sheild_4 Sheild_3 Sheild_2 Sheild_1 GND ID Data+ Data- Vbus PIN20 PIN19 PIN18 PIN17 PIN16 PIN15 PIN14 PIN13 PIN12 PIN11 PIN10 PIN9 PIN8 PIN7 PIN6 PIN5 PIN4 PIN3 PIN2 PIN1 CN102 R101 R103 10kΩ 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 PH-2x40RG_20p JP101 CN101 R107 0Ω 10μF C101 1 7 4 6 R118 10kΩ 10kΩ R113 VOUT2 VIN2 GND1 LX VIN1 10kΩ R119 10kΩ R114 10kΩ 10kΩ R120 5 3 2 10 9 8 10kΩ R116 031_LDO R115 EN2 GND2 EN1 POR FB IC102 MB39C022G_GNDPAD R117 33Ω R112 33Ω R111 33Ω R110 33Ω R109 33Ω R108 0.1μF C102 10kΩ 0.1μF C105 LED101 2kΩ R102 EP 11 C104 4.7μF 0.1μF JP102 C103 BC857B T101 E B C 3R3V R104 1.5kΩ R106 2.2kΩ R105 10kΩ R140 22kΩ R145 R144 10kΩ R143 10kΩ 10kΩ R142 10kΩ R141 10kΩ 7pF C109 Q101 7 8 9 10 11 12 DMS-6H 6 5 4 3 2 1 SW102 PH-1x2SG CN104 7pF C110 ST3215SB32768 2 PIN2 GND_2 PIN1 1 VCCI2C 10kΩ R132 SKHRAHA010 10kΩ R128 3 1 2 4 SW101 SCL SDA C111 Q102 12pF C112 CX1255GB 0.1μF 1 20 10kΩ R131 12pF C113 24 23 22 21 19 1kΩ 18 R129 17 16 15 14 13 IC101 VSS3 P81/UDP0 USBVCC P80/UDM0 VSS2 PE3/X1 PE2/X0 MD0 PE0/MD1 P4A/TIOB1_0 P49/TIOB0_0 INITX P47/X1A P46/X0A VCC2 C MB9AF312K P10/AN00 P11/AN01/SIN1_1/INT02_1/FRCK0_2/IC02_0/WKUP1 P12/AN02/SOT1_1/IC00_2 P13/AN03/SCK1_1/IC01_2/RTCCO_1/SUBOUT_1 P14/AN04/SIN0_1/INT03_1/IC02_2 P15/AN05/SOT0_1/IC03_2 AVCC AVRH AVSS P23/AN06/SCK0_0/TIOA7_1 P22/AN07/SOT0_0/TIOB7_1 P21/SIN0_0/INT06_1/WKUP2 P00/TRSTX P01/TCK/SWCLK P02/TDI P03/TMS/SWDIO P3D/RTO03_0/TIOA3_1 P3E/RTO04_0/TIOA4_1 P04/TDO/SWO P0F/NMIX/CROUT_1/RTCCO_0/SUBOUT_0/WKUP0 P3C/RTO02_0/TIOA2_1 P3B/RTO01_0/TIOA1_1 P60/SIN5_0/TIOA2_2/INT15_1/IC00_0/WKUP3 P39/DTTI0X_0/ADTG_2 P3A/RTO00_0/TIOA0_1/RTCCO_2/SUBOUT_2 P61/SOT5_0/TIOB2_2/UHCONX/DTTI0X_2 P52/INT02_0/ZIN0_2/SCK3_1 P51/INT01_0/BIN0_2/SOT3_1 P50/INT00_0/AIN0_2/SIN3_1 VCC1 11 P3F/RTO05_0/TIOA5_1 12 VSS1 10 9 8 7 6 5 4 3 2 10kΩ R130 C108 0.1μF 4.7μF C107 10kΩ 2kΩ 2kΩ R125 LED105 R126 10kΩ R127 2kΩ R124 R122 2kΩ R123 LED103 LED104 LED102 10kΩ R121 0.1μF C106 4 VBUS 3 2 2 1 GND_1 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 0.1μF C114 10kΩ R135 10kΩ 10kΩ R139 R137 10kΩ R138 10kΩ R136 22Ω R133 22Ω R134 0.1μF C115 D102 PIN4 PIN3 PIN2 PIN1 CN103 PH-1x4SGRG 4 3 2 1 Circuit Schematic Figure 6-2. Circuit Schematic for MCU Bock 24 7. Component List Table 7-1. Component list (Power) No. Component Item Parts number Vendor Value Remarks 1 M1 PMIC MB39C031 CYPRESS - - 2 L1 Inductor 1299AS-H-1R5N=P2 TOKO 1.5μH - 3 L2 Inductor 1299AS-H-1R5N=P2 TOKO 1.5μH - 4 C1 Ceramic Capacitor C1608JB1V475K TDK 4.7μF 35V 5 C2 Ceramic Capacitor C1608X5R1E106M TDK 10μF 25V 6 C3 Ceramic Capacitor - - - Unmounted 7 C4 Ceramic Capacitor C1608JB1V475K TDK 4.7μF 35V 8 C5 Ceramic Capacitor C1608X5R1E106M TDK 10μF 25V 9 C6 Ceramic Capacitor - - - Unmounted 10 C7 Ceramic Capacitor C1608JB1V475K TDK 4.7μF 35V 11 C8 Ceramic Capacitor C1608JB1V475K TDK 4.7μF 35V 12 C9 Ceramic Capacitor - - - Unmounted 13 C10 Ceramic Capacitor C1608JB1H104K TDK 0.1μF 50V 14 C11 Ceramic Capacitor C1608JB1H104K TDK 0.1μF 50V 15 C12 Ceramic Capacitor C1608JB1H474K TDK 0.47μF 50V 16 C13 Ceramic Capacitor C1608JB1H104K TDK 0.1μF 50V 17 C14 Ceramic Capacitor C1608JB1H103K TDK 0.01μF 50V 18 C15 Ceramic Capacitor C1608JB1H103K TDK 0.01μF 50V 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 25 Component List No. Component Item Parts number Vendor Value Remarks 19 C16 Ceramic Capacitor C1608JB1H103K TDK 0.01μF 50V 20 C17 Ceramic Capacitor C1608JB1H103K TDK 0.01μF 50V 21 R1 Chip Resistor RR0816P104D SUSUMU 100kΩ ±0.5%, ±50ppm 22 R2 Chip Resistor RR0816P104D SUSUMU 100kΩ ±0.5%, ±50ppm 23 R3 Chip Resistor RR0816P104D SUSUMU 100kΩ ±0.5%, ±50ppm 24 R4 Chip Resistor RR0816P104D SUSUMU 100kΩ ±0.5%, ±25ppm 25 R5 Chip Resistor CR0603-J/-000ELF BOURNS 0Ω 1/10W, 5% 26 R6 Chip Resistor CR0603-J/-000ELF BOURNS 0Ω 1/10W, 5% 27 R7 Chip Resistor RR0816P222D SUSUMU 2.2kΩ ±0.5%, ±25ppm 28 R8 Chip Resistor RR0816P222D SUSUMU 2.2kΩ ±0.5%, ±25ppm 29 R9 Chip Resistor RR0816P103D SUSUMU 10kΩ ±0.5%, ±25ppm 30 R10 Chip Resistor RR0816P103D SUSUMU 10kΩ ±0.5%, ±25ppm 31 R11 Chip Resistor RR0816P103D SUSUMU 10kΩ ±0.5%, ±25ppm 32 R12 Chip Resistor RR0816P103D SUSUMU 10kΩ ±0.5%, ±25ppm 33 R13 Chip Resistor RR0816P103D SUSUMU 10kΩ ±0.5%, ±25ppm 34 JP1 Solder jumper Solder jumper - - JPPAD_0.8_R2012 35 JP2 Solder jumper Solder jumper - - JPPAD 36 JP3 Solder jumper Solder jumper - - JPPAD_0.8 37 JP4 Solder jumper Solder jumper - - JPPAD_0.8_R2012 38 JP5 Solder jumper Solder jumper - - JPPAD_0.8 39 JP6 Solder jumper Solder jumper - - JPPAD_0.8 40 JP7 Solder jumper Solder jumper - - JPPAD_0.8 41 JP8 Solder jumper Solder jumper - - JPPAD_0.8 42 JP9 Solder jumper Solder jumper - - JPPAD_0.8 43 JP10 Solder jumper Solder jumper - - JPPAD_0.8 44 JP11 Solder jumper Solder jumper - - JPPAD_0.8 45 JP13 Solder jumper Solder jumper - - JPPAD_0.8 46 JP14 Solder jumper Solder jumper - - JPPAD_0.8 47 JP15 Solder jumper Solder jumper - - JPPAD_0.8 48 JP16 Solder jumper Solder jumper - - JPPAD_0.8 49 JP17 Solder jumper Solder jumper - - JPPAD_0.8 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 26 Component List No. Component Item Parts number Vendor Value Remarks 50 JP18 Solder jumper Solder jumper - - JPPAD_0.8 51 JP19 Solder jumper Solder jumper - - JPPAD_0.8 PH-1x04SG(RG) Useconn Electronic s Ltd. 4 pin 1x4 pin header(2.54mm pitch), 52 CN101 Connector C-03950 2x6 pin header(2.54mm pitch), 53 CN102 Connector PH-2x06SG(RG) Useconn Electronic s Ltd. 54 SW1 DIP switch DMS-6H - 6 pin - 55 VIN Terminal WT-2-1 MAC8 - - 56 GND Terminal WT-2-1 MAC8 - - 57 VCCI2C Terminal WT-2-1 MAC8 - - 58 SCL Terminal WT-2-1 MAC8 - - 59 SDA Terminal WT-2-1 MAC8 - - 60 ADDSEL Terminal WT-2-1 MAC8 - - 61 CTLMAIN Terminal WT-2-1 MAC8 - - 62 CTL1 Terminal WT-2-1 MAC8 - - 63 CTL2 Terminal WT-2-1 MAC8 - - 64 CTLL Terminal WT-2-1 MAC8 - - 65 Vo1 Terminal WT-2-1 MAC8 - - 66 Vo1_GND Terminal WT-2-1 MAC8 - - 67 PG1 Terminal WT-2-1 MAC8 - - 68 Vo2 Terminal WT-2-1 MAC8 - - 69 Vo2_GND Terminal WT-2-1 MAC8 - - 70 PG2 Terminal WT-2-1 MAC8 - - 71 LDO Terminal WT-2-1 MAC8 - - 72 LDO_GND Terminal WT-2-1 MAC8 - - 73 PGL Terminal WT-2-1 MAC8 - - 74 ERR Terminal WT-2-1 MAC8 - - 75 C201 Capacitor - - - Unmounted 76 C202 Capacitor - - - Unmounted 77 C203 Capacitor - - - Unmounted 78 C204 Capacitor - - - Unmounted 79 C205 Capacitor - - - Unmounted 80 C206 Capacitor - - - Unmounted 81 C207 Capacitor - - - Unmounted 82 C208 Capacitor - - - Unmounted 12 pin Divided C-05197 These components are compliant with RoHS, and please ask each vendor for details if necessary. 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 27 Component List Table 7-2. Component List (MCU) No. Component Item Parts number Vendor Value Remark 1 IC101 MCU MB9AF312K CYPRESS - - 2 IC102 PMIC MB39C022G CYPRESS - - 3 R101 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 4 R102 Resistor RR0816P202D SUSUMU 2kΩ 1/16W, 0.5% 5 R103 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 6 R104 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 7 R105 Resistor RR0816P222D SUSUMU 2.2kΩ 1/16W, 0.5% 8 R106 Resistor RR0816P152D SUSUMU 1.5kΩ 1/16W, 0.5% 9 R107 Resistor CR0603-J/-000ELF BOURNS 0Ω 1/10W, 5% 10 R108 Resistor RR0816Q330D SUSUMU 33Ω 1/16W, 0.5% 11 R109 Resistor RR0816Q330D SUSUMU 33Ω 1/16W, 0.5% 12 R110 Resistor RR0816Q330D SUSUMU 33Ω 1/16W, 0.5% 13 R111 Resistor RR0816Q330D SUSUMU 33Ω 1/16W, 0.5% 14 R112 Resistor RR0816Q330D SUSUMU 33Ω 1/16W, 0.5% 15 R113 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 16 R114 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 17 R115 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 18 R116 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 19 R117 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 20 R118 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 21 R119 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 22 R120 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 23 R121 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 24 R122 Resistor RR0816P202D SUSUMU 2kΩ 1/16W, 0.5% 25 R123 Resistor RR0816P202D SUSUMU 2kΩ 1/16W, 0.5% 26 R124 Resistor RR0816P202D SUSUMU 2kΩ 1/16W, 0.5% 27 R125 Resistor RR0816P202D SUSUMU 2kΩ 1/16W, 0.5% 28 R126 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 29 R127 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 30 R128 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 31 R129 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 32 R130 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 33 R131 Resistor RR0816P102D SUSUMU 1kΩ 1/16W, 0.5% 34 R132 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 35 R133 Resistor RR0816Q220D SUSUMU 22Ω 1/16W, 0.5% 36 R134 Resistor RR0816Q220D SUSUMU 22Ω 1/16W, 0.5% 37 R135 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 38 R136 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 39 R137 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 40 R138 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 41 R139 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 28 Component List No. Component Item Parts number Vendor Value Remark 42 R140 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 43 R141 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 44 R142 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 45 R143 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 46 R144 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 47 R145 Resistor RR0816P103D SUSUMU 10kΩ 1/16W, 0.5% 48 C101 Capacitor C1608JB1H106M TDK 10μF 50V 49 C102 Capacitor C1608JB1H104K TDK 0.1μF 50V 50 C103 Capacitor C1608JB1H104K TDK 0.1μF 50V 51 C104 Capacitor C1608JB1V475K TDK 4.7uF 35V 52 C105 Capacitor C1608JB1H104K TDK 0.1μF 50V 53 C106 Capacitor C1608JB1H104K TDK 0.1μF 50V 54 C107 Capacitor C1608JB1V475K TDK 4.7μF 35V 55 C108 Capacitor C1608JB1H104K TDK 0.1μF 50V 56 C109 Capacitor C1608CH1H070D080 AA TDK 7pF 50V 57 C110 Capacitor C1608CH1H070D080 AA TDK 7pF 50V 58 C111 Capacitor C1608JB1H104K TDK 0.1μF 50V 59 C112 Capacitor C1608C0G1H120J080 AA TDK 12pF 50V 60 C113 Capacitor C1608C0G1H120J080 AA TDK 12pF 50V 61 C114 Capacitor C1608JB1H104K TDK 0.1μF 50V 62 C115 Capacitor C1608JB1H104K TDK 0.1μF 50V 63 CN101 Connector UX60SC-MB-5ST Hirose Electric - mini USB 64 CN102 Connector PH-2xXXRG Useconn Electronics Ltd. - 65 CN103 Connector PH-1xXXRG Useconn Electronics Ltd. - 66 CN104 Connector PH-1xXXRG Useconn Electronics Ltd. - 67 D101 Diode RB161M-20TR ROHM - 68 D102 Diode RB161M-20TR ROHM - - 69 LED101 LED OSHR1608C1A OptoSupply - RED 70 LED102 LED OSTG1608C1A OptoSupply - GREEN 71 LED103 LED OSTG1608C1A OptoSupply - GREEN 72 LED104 LED OSTG1608C1A OptoSupply - GREEN 73 LED105 LED OSTG1608C1A OptoSupply - GREEN 74 JP101 Solder jumper JPPAD - - Unmounted 75 JP102 Solder jumper JPPAD - - 2 2x10 pin header, Divided C-05197 1x4 pin header, C03950 1x2 pin header, Divided C-00167 - 3pin, 3216 Shorted to 022 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 29 Component List No. Component Item Parts number Vendor Value Remark 76 SW101 Push-SW SKHRAHA010 ALPS Electric - - 77 SW102 DIPSW DMS-6H - - 6pin,2.54mm pitch 78 Q101 Crystal - - - Unmounted 79 Q102 Crystal CX1255GB04000H0P ESZ1 KYOCERA 4MHz - 80 T101 Transistor BC857BLT1G ROHM - PNP 81 VBUS Monitor pin - - - Unmounted 82 GND_1 Monitor pin - - - Unmounted 83 3R3V Monitor pin - - - Unmounted 84 GND_2 Monitor pin - - - Unmounted These components are compliant with RoHS, and please ask each vendor for details if necessary. TOKO : TOKO, INC. TDK : TDK Corporation SUSUMU : SUSUMU Co., Ltd. MAC8 : Mac-Eight Co., Ltd. BOURNS : Bourns, Inc. Hirose Electric : HIROSE Electric Co., Ltd. ROHM : ROHM Co., Ltd. OptoSupply : Opto Supply Limited KYOCERA : KYOCERA Corporation ALPS Electric : ALPS ELECTRIC CO., LTD. 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 30 8. Evaluation Board Picture Figure 8-1. Picture (top) 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 31 Evaluation Board Picture Figure 8-2. Picture (back) 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 32 9. Ordering Information Table 9-1. Ordering Information Part number EVB revision MB39C031-EVB-01 Rev 3.0 2 Note --- MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 33 Revision History Document Revision History 2 Document Title: MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide Document Number: 002-08673 Revision ECN Origin of Issue Date Description of Change Change ** - ATTS 02/28/2014 Initial release *A 5120318 ATTS 02/04/2016 Migrated Spansion Guide from MB39C031-EVB-01_SS901-00021-1v0-E to Cypress format *B 5959783 MASG 11/07/2017 Adapted Cypress new logo. *C 6069442 YOST 02/13/2018 Updated the Sales information and legal. Completing Sunset Review. 2 MB39C031-EVB-01 2ch Buck DC/DC + LDO with I C Interface Evaluation Board Operation Guide, Doc. No. 002-08673 Rev. *C 34