Fujitsu Microelectronics Europe
User Guide
FMEMCU-UG-910021-14
MB91V460 FAMILY
PROBE CABLE
PB-91467D-LS-208PFV
USER GUIDE
PB-91467D-LS-208PFV V12
Revision History
Revision History
Date
2006-Mar-17
2007-Mar-02
2007-Apr-10
2008-Sep-16
2009-Jan-09
Issue
V1.0, HLi, First Release
V1.1 Recycling Note added
V1.2 HLi, Remove MCU before using probe cable info added
V1.3 MSc, China-RoHS regulation added
V1.4 MSc, Information WWW updated
This document contains 24 pages.
UG-910021-14
-2-
© Fujitsu Microelectronics Europe GmbH
PB-91467D-LS-208PFV V12
Warranty and Disclaimer
Warranty and Disclaimer
To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts
its warranties and its liability for the PB-91467D-LS-208PFV Probe and all its deliverables (e.g.
software include or header files, application examples, target boards, evaluation boards, engineering
samples of IC’s etc.), its performance and any consequential damages, on the use of the Product in
accordance with (i) the terms of the License Agreement and the Sale and Purchase Agreement under
which agreements the Product has been delivered, (ii) the technical descriptions and (iii) all
accompanying written materials. In addition, to the maximum extent permitted by applicable law,
Fujitsu Microelectronics Europe GmbH disclaims all warranties and liabilities for the performance of
the Product and any consequential damages in cases of unauthorised decompiling and/or reverse
engineering and/or disassembling. Note, the PB-91467D-LS-208PFV Probe and all its deliverables
are intended and must only be used in an evaluation laboratory environment.
1.
Fujitsu Microelectronics Europe GmbH warrants that the Product will perform substantially in
accordance with the accompanying written materials for a period of 90 days form the date of
receipt by the customer. Concerning the hardware components of the Product, Fujitsu
Microelectronics Europe GmbH warrants that the Product will be free from defects in material
and workmanship under use and service as specified in the accompanying written materials
for a duration of 1 year from the date of receipt by the customer.
2.
Should a Product turn out to be defect, Fujitsu Microelectronics Europe GmbH´s entire liability
and the customer’s exclusive remedy shall be, at Fujitsu Microelectronics Europe GmbH´s
sole discretion, either return of the purchase price and the license fee, or replacement of the
Product or parts thereof, if the Product is returned to Fujitsu Microelectronics Europe GmbH in
original packing and without further defects resulting from the customer’s use or the transport.
However, this warranty is excluded if the defect has resulted from an accident not attributable
to Fujitsu Microelectronics Europe GmbH, or abuse or misapplication attributable to the
customer or any other third party not relating to Fujitsu Microelectronics Europe GmbH.
3.
To the maximum extent permitted by applicable law Fujitsu Microelectronics Europe GmbH
disclaims all other warranties, whether expressed or implied, in particular, but not limited to,
warranties of merchantability and fitness for a particular purpose for which the Product is not
designated.
4.
To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH´s
and its supplier’s liability are restricted to intention and gross negligence.
NO LIABILITY FOR CONSEQUENTIAL DAMAGES
To the maximum extent permitted by applicable law, in no event shall Fujitsu
Microelectronics Europe GmbH and its suppliers be liable for any damages whatsoever
(including but without limitation, consequential and/or indirect damages for personal
injury, assets of substantial value, loss of profits, interruption of business operation,
loss of information, or any other monetary or pecuniary loss) arising from the use of
the Product.
Should one of the above stipulations be or become invalid and/or unenforceable, the remaining
stipulations shall stay in full effect
© Fujitsu Microelectronics Europe GmbH
-3-
UG-910021-14
PB-91467D-LS-208PFV V12
Contents
0 Contents
REVISION HISTORY ............................................................................................................ 2
WARRANTY AND DISCLAIMER ......................................................................................... 3
0 CONTENTS...................................................................................................................... 4
1 OVERVIEW ...................................................................................................................... 5
1.1
Abstract................................................................................................................... 5
2 DEFAULT JUMPER SETTING......................................................................................... 6
3 JUMPERS ........................................................................................................................ 9
3.1
Power Supply Voltage (JP: 81, 82, 92, 93, 94) ........................................................ 9
3.2
C-Pin Jumper (JP84)............................................................................................... 9
3.3
Analog voltage Jumpers (JP85, JP86, JP87)......................................................... 10
3.4
Level-shifter direction control Jumper (JP53 – JP64, JP77 and JP78)................... 10
3.5
Data bus jumpers (D0-D31, JP1 – JP32)............................................................... 11
3.6
Chip Select CSX0,1,2,3,6,7 Jumpers (JP33 – JP44) ............................................. 13
3.7
DMA Jumpers DACK, DEOP, DREQ (JP47 – JP50) ............................................. 14
3.8
ASX, RDY, BGRNTX, BRQ, BAAX, WEX (JP45, 46, 65-76, 88-90)....................... 15
3.9
Other Jumper (JP88 – JP91) ................................................................................ 16
4 INSTALLATION ............................................................................................................. 17
YQ-PACK208SD
QFP-EXTENDER-208PFV.................................................. 17
5 DIMENSIONS................................................................................................................. 18
PB-91467D-LS-208PFV ................................................................................................. 18
YQ-SOCKET208SDN..................................................................................................... 19
YQ-PACK208SD ............................................................................................................ 19
QFP-EXTENDER-208PFV (not included) ...................................................................... 20
6 INFORMATION IN THE WWW....................................................................................... 21
7 CHINA-ROHS REGULATION ........................................................................................ 22
8 RECYCLING .................................................................................................................. 24
UG-910021-14
-4-
© Fujitsu Microelectronics Europe GmbH
PB-91467D-LS-208PFV V12
Chapter 1 Overview
1 Overview
1.1
Abstract
The PB-91467D-LS-208PFV is a probe cable with Level shifters to support the MB91V460
external bus interface at 3.3 V levels.
© Fujitsu Microelectronics Europe GmbH
-5-
UG-910021-14
PB-91467D-LS-208PFV V12
Chapter 2 Default Jumper Setting
2 Default Jumper Setting
The following jumper setting is the default setting. All jumpers are named directly on the
board, so it is easy to set the jumpers according to the features.
Jumper
Description / Function
Type
Default Coordinate
JP1
P03_0 D0 / use LV1 > JP17 must be open
Jumper 2pol
closed
M9
JP2
P03_1 D1 / use LV1 > JP18 must be open
Jumper 2pol
closed
M9
JP3
P03_2 D2 / use LV1 > JP19 must be open
Jumper 2pol
closed
M9
JP4
P03_3 D3 / use LV1 > JP20 must be open
Jumper 2pol
closed
M9
JP5
P03_4 D4 / use LV1 > JP21 must be open
Jumper 2pol
closed
M9
JP6
P03_5 D5 / use LV1 > JP22 must be open
Jumper 2pol
closed
L9
JP7
P03_6 D6 / use LV1 > JP23 must be open
Jumper 2pol
closed
L9
JP8
P03_7 D7 / use LV1 > JP24 must be open
Jumper 2pol
closed
L9
JP9
P02_0 D8 / use LV1 > JP25 must be open
Jumper 2pol
closed
L9
JP10
P02_1 D9 / use LV1 > JP26 must be open
Jumper 2pol
closed
L9
JP11
P02_2 D10 / use LV1 > JP27 must be open
Jumper 2pol
closed
K9
JP12
P02_3 D11 / use LV1 > JP28 must be open
Jumper 2pol
closed
K9
JP13
P02_4 D12 / use LV1 > JP29 must be open
Jumper 2pol
closed
K9
JP14
P02_5 D13 / use LV1 > JP30 must be open
Jumper 2pol
closed
K9
JP15
P02_6 D14 / use LV1 > JP31 must be open
Jumper 2pol
closed
J/K9
JP16
P02_7 D15 / use LV1 > JP32 must be open
Jumper 2pol
closed
J9
JP17
P03_0 D0 / use LV2 > JP1 is closed
Jumper 2pol
open
M/N5/6
JP18
P03_1 D1 / use LV2 > JP2 is closed
Jumper 2pol
open
M5/6
JP19
P03_2 D2 / use LV2 > JP3 is closed
Jumper 2pol
open
M5/6
JP20
P03_3 D3 / use LV2 > JP4 is closed
Jumper 2pol
open
M5/6
JP21
P03_4 D4 / use LV2 > JP5 is closed
Jumper 2pol
open
M5/6
JP22
P03_5 D5 / use LV2 > JP6 is closed
Jumper 2pol
open
L/M5/6
JP23
P03_6 D6 / use LV2 > JP7 is closed
Jumper 2pol
open
L5/6
JP24
P03_7 D7 / use LV2 > JP8 is closed
Jumper 2pol
open
L5/6
JP25
P02_0 D8 / use LV2 > JP9 is closed
Jumper 2pol
open
L5/6
JP26
P02_1 D9 / use LV2 > JP10 is closed
Jumper 2pol
open
L5/6
JP27
P02_2 D10 / use LV2 > JP11 is closed
Jumper 2pol
open
K5/6
JP28
P02_3 D11 / use LV2 > JP12 is closed
Jumper 2pol
open
K5/6
JP29
P02_4 D12 / use LV2 > JP13 is closed
Jumper 2pol
open
K5/6
JP30
P02_5 D13 / use LV2 > JP14 is closed
Jumper 2pol
open
K5/6
JP31
P02_6 D14 / use LV2 > JP15 is closed
Jumper 2pol
open
J/K5/6
JP32
P02_7 D15 / use LV2 > JP16 is closed
Jumper 2pol
open
J5/6
JP33
P09_0 CSX0 / use LV7 B/A > JP39 must be open
Jumper 2pol
closed
D9
JP34
P09_1 CSX1 / use LV7 B/A > JP40 must be open
Jumper 2pol
closed
D9
JP35
P09_2 CSX2 / use LV7 B/A > JP41 must be open
Jumper 2pol
closed
D9
JP36
P09_3 CSX3 / use LV7 B/A > JP42 must be open
Jumper 2pol
closed
C/D9
JP37
P09_6 CSX6 / use LV7 B/A > JP43 must be open
Jumper 2pol
closed
C9
JP38
P09_7 CSX7 / use LV7 B/A > JP44 must be open
Jumper 2pol
closed
C9
JP39
P09_0 CSX0 / use LV7 A/B > JP33 is closed
Jumper 2pol
open
D5/6
JP40
P09_1 CSX1 / use LV7 A/B > JP34 is closed
Jumper 2pol
open
D5/6
JP41
P09_2 CSX2 / use LV7 A/B > JP35 is closed
Jumper 2pol
open
D5/6
JP42
P09_3 CSX3 / use LV7 A/B > JP36 is closed
Jumper 2pol
open
D5/6
JP43
P09_6 CSX6 / use LV7 A/B > JP37 is closed
Jumper 2pol
open
C5/6
UG-910021-14
-6-
© Fujitsu Microelectronics Europe GmbH
PB-91467D-LS-208PFV V12
Chapter 2 Default Jumper Setting
JP44
P09_7 CSX7 / use LV7 A/B > JP38 is closed
Jumper 2pol
open
C5/6
JP45
P10_1 ASX / use LV7 A/B > JP65 is closed
Jumper 2pol
open
C5/6
JP46
P08_7 RDY / use LV7 A/B > JP66 must open
Jumper 2pol
closed
C5/6
JP47
P13_1 1DACKX0 > V460_DACKX0
Jumper 3+1
1-2
B/C7/8
JP48
P13_2 1DEOP0 > V460_DEOP0
Jumper 3+1
2-3
B/C8
JP49
P13_0 2DREQ0 > V460_DREQ0
Jumper 3+1
2-3
B/C6/7
JP50
P13_1 4DACKX0 > DACKX0
Jumper 3pol
1-2
A8/9
JP51
P13_2 4DEOP0 > 4DEOP0 and DEOP0
Jumper 3pol
1-2
A8/9
JP52
P13_0 5DREQ0 > DREQ0 and 5DREQ0
Jumper 3pol
2-3
A8/9
JP53
Levelshifter1 / direction control 1DIR
2x3pol
2-5
N7/8
JP54
Levelshifter1 / direction control 2DIR
2x3pol
2-5
N8/9
JP55
Levelshifter2 / direction control 1DIR
1x3pol
1-2
L6/7
JP56
Levelshifter2 / direction control 2DIR
1x3pol
1-2
J5/6
JP57
Levelshifter3 / direction control 1DIR
2x3pol
2-5
J5/6
JP58
Levelshifter3 / direction control 2DIR
2x3pol
2-5
H5/6
JP59
Levelshifter5 / direction control 1DIR
1x3pol
2-3
G5/6
JP60
Levelshifter5 / direction control 2DIR
1x3pol
2-3
F5/6
JP61
Levelshifter6 / direction control 1DIR
1x3pol
2-3
F5/6
JP62
Levelshifter6 / direction control 2DIR
1x3pol
2-3
E5/6
JP63
Levelshifter7 / direction control 1DIR
1x3pol
2-3
D5/6
JP64
Levelshifter7 / direction control 2DIR
1x3pol
1-2
B/C5/6
JP65
P10_1 ASX / use LV7 B/A > JP45 must be open
Jumper 2pol
closed
C8/9
JP66
P08_7 RDY / use LV7 B/A > JP46 is closed
Jumper 2pol
open
C8/9
JP67
P08_5 BGRNTX / use LV4 B/A>JP75 is closed
Jumper 2pol
open
B5/6
JP68
P08_6 BRQ / use LV4 B/A > JP76 must be open
Jumper 2pol
closed
B5/6
JP69
P10_2 BAAX / use LV4 B/A > JP72 is closed
Jumper 2pol
open
B5/6
JP70
P10_3 WEX / use LV4 B/A > JP73 is closed
Jumper 2pol
open
A/B5/6
JP72
P10_2 BAAX / use LV4 B/A > JP69 must be open
Jumper 2pol
closed
B8/9
JP73
P10_3 WEX / use LV4 B/A > JP70 must be open
Jumper 2pol
closed
A/B8/9
JP75
P08_5 BGRNTX / use LV4 B/A>JP67 must be open
Jumper 2pol
closed
B8/9
JP76
P08_6 BRQ / use LV4 B/A > JP68 is closed
Jumper 2pol
open
B8/9
JP77
Levelshifter4 / direction control 1DIR
Jumper 3pol
1-2
B5/6
JP78
Levelshifter4 / direction control 2DIR
Jumper 3pol
2-3
A5/6
JP81
VCC 5V Jumper
Jumper 3+1
1-2
B9/10
JP82
VCC 3V Jumper
Jumper 3+1
1-2
D9/10
JP84
VCC3C > 10µF | 10nF > GND
Jumper 2pol
closed
N5/6
JP85
AVSS
Jumper 2pol
closed
N6
JP86
AVRH5
Jumper 2pol
closed
N6/7
JP87
AVCC5
Jumper 2pol
closed
N7
JP88
MONCLK / test point
Jumper 2pol
open
B8/9
JP89
RDY pull up
Jumper 2pol
closed
B/C8/9
JP90
WEX or RDX > DIR
Jumper 3pol
2-3
G8/9
JP91
WEX or V460_WEX
Jumper 3pol
2-3
F8/9
JP92
3V3 > UVCC3
Jumper 2pol
open
E8/9
JP93
5V_T > UVCC5
Jumper 2pol
closed
A5/6
JP94
VDD3_T: UVCC3 or UVCC5
Jumper 3pol
1-2
D/E8/9
© Fujitsu Microelectronics Europe GmbH
-7-
UG-910021-14
PB-91467D-LS-208PFV V12
A
B
C
D
E
F
G
H
J
K
L
M
N
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
19
19
20
20
21
21
22
22
23
23
24
24
25
25
26
26
27
27
28
28
29
29
A
UG-910021-14
B
C
D
E
F
G
-8-
H
J
K
L
M
N
© Fujitsu Microelectronics Europe GmbH
PB-91467D-LS-208PFV V12
Chapter 3 Jumpers
3 Jumpers
This chapter describes all jumpers that can be modified on the probe. The default setting is
shown with a grey shaded area. All jumpers are named directly on the board, so it is very
easy to set the jumpers according to the features.
3.1
Power Supply Voltage (JP: 81, 82, 92, 93, 94)
3V3 and 5V are the supply voltages for the Level shifters. The Jumpers JP81 and JP82 in
conjunction with S1 and S2, allow to use an externally power supply for the Level shifters. In
that case, take care of the input-voltage. Neither a voltage regulation nor an over-voltageprotection does exist for an external power-supply. The default setting is supplying the level
shifters via VDD3_T and 5V_T directly from the target board. JP93 must be closed and JP94
have to be set to 1-2. JP 92 should be left open.
Jumper
JP81 (5V
supply)
JP82 (3V3
supply)
JP92 (UVCC3 >
3V3)
JP93 (UVCC5 >
5V_T)
JP94
Setting
Description
1-2
The target site of the level shifters (A-site, 3V3) is
supplied by VDD3_T.
2-3
The target site of the level shifters (A-site, 3V3) is
supplied by external power-supply from S1.
1-2
The emulator site of the level shifters (B-site, 5V) is
supplied by 5V_T.
2-3
The emulator site of the level shifters (B-site, 5V) is
supplied by 5V_T external power-supply from S2
ON (closed)
3V3 is connected to UVCC3 of the emulator
MB2198-300. (see also JP94)
OFF (open)
3V3 is not connected to UVCC3 of the emulator
MB2198-300. (see also JP94)
ON (closed)
The power supply 5V_T of target is connected to
UVCC5 of MB2198-300. (see also JP94)
OFF (open)
The power supply 5V_T of target is not connected
to UVCC5 of MB2198-300. (see also JP94)
1–2
UVCC3 of MB2198-300 is connected to VDD3_T of
target ( see also JP92, JP93)
2–3
UVCC5 of MB2198-300 is connected to VDD3_T.
Open
3.2
C-Pin Jumper (JP84)
Jumper
JP84
Setting
Description
ON (closed)
The C-Pin is connected to 10µF | 10nF > GND
OFF (open)
The C-Pin is not connected to 10µF | 10nF > GND
© Fujitsu Microelectronics Europe GmbH
-9-
UG-910021-14
PB-91467D-LS-208PFV V12
Chapter 3 Jumpers
3.3
Analog voltage Jumpers (JP85, JP86, JP87)
Jumper
JP85 AVSS
JP86 AVRH5
JP87 AVCC5
3.4
Setting
Description
ON (closed)
Analog input voltage is connected to the target
OFF (open)
Analog input voltage is not connected to the target
ON (closed)
Analog reference voltage is connected to the target
OFF (open)
Analog reference voltage is not connected to the
target
ON (closed)
Analog supply voltage is connected to the target
OFF (open)
Analog supply voltage is not connected to the
target
Level-shifter direction control Jumper (JP53 – JP64, JP77 and JP78)
Jumper
Setting
1–4
JP53 (D0-D7)
direction control
LV1 /1DIR
2–5
3–6
1–4
JP54 (D7-D15)
direction control
LV1 /2DIR
2–5
3–6
JP55 (D0-D7)
1–2
direction control
Description
1DIR connected to 5V -> LV1/1 direction A/B
(target to MB2198-300)
1DIR connected to DIR -> the direction of LV1
1A1B is selectable
1DIR connected to GND -> LV1/1 direction B/A
(MB2198-300 to target)
2DIR connected to 5V -> LV1/2A direction A/B
(target to MB2198-300)
2DIR connected to DIR -> the direction of LV1
2A2B is selectable
2DIR connected to GND -> LV1/2 direction B/A
(MB2198-300 to target)
1DIR connected to 5V > LV2/1 direction A/B>
(target to MB2198-300)
LV2 /1DIR
2–3
1DIR connected to GND -> LV2/1 direction B/A
(MB2198-300 to target)
JP56 (D7-D15)
1–2
2DIR connected to 5V > LV2/2 direction A/B>
(target to MB2198-300)
2DIR connected to GND -> LV2/2 direction B/A
(MB2198-300 to target)
direction control
LV2 /2DIR
2–3
1–4
JP57 (D16-D23)
direction control
2–5
LV3 /1DIR
3–6
1–4
JP58 (D24-D31)
direction control
LV3 /2DIR
UG-910021-14
2–5
3–6
1DIR connected to 5V -> LV3 /1 direction A/B
(target to MB2198-300)
1DIR connected to DIR -> the direction of LV3
1A1B is selectable
1DIR connected to GND -> LV3/1 direction B/A
(MB2198-300 to target)
2DIR connected to 5V -> LV3/2 direction A/B
(target to MB2198-300)
2DIR connected to DIR -> the direction of LV3
2A2B is selectable
2DIR connected to GND -> LV3/2 direction B/A
(MB2198-300 to target)
- 10 -
© Fujitsu Microelectronics Europe GmbH
PB-91467D-LS-208PFV V12
Chapter 3 Jumpers
JP59 (A0-A7)
1–2
1DIR connected to 5V > LV5/1 direction A/B >
(target to MB2198-300)
2–3
1DIR connected to GND -> LV5/1 direction B/A
(MB2198-300 to target)
1–2
2DIR connected to 5V > LV5/2 direction A/B >
(target to MB2198-300)
2–3
2DIR connected to GND -> LV5/2 direction B/A
(MB2198-300 to target)
1–2
1DIR connected to 5V > LV6/1 direction A/B >
(target to MB2198-300)
2–3
1DIR connected to GND -> LV6/1 direction B/A
(MB2198-300 to target)
1–2
2DIR connected to 5V > LV6/2 direction A/B >
(target to MB2198-300)
2–3
2DIR connected to GND -> LV6/2 direction B/A
(MB2198-300 to target)
1–2
1DIR connected to 5V > LV7/1 direction A/B >
(target to MB2198-300)
2–3
1DIR connected to GND -> LV7/1 direction B/A
(MB2198-300 to target)
1–2
2DIR connected to 5V > LV7/2 direction A/B >
(target to MB2198-300)
2-3
2DIR connected to GND -> LV7/2 direction B/A
(MB2198-300 to target)
1–2
1DIR connected to 5V > LV4/1 direction A/B >
(target to MB2198-300)
2-3
1DIR connected to GND -> LV4/1 direction B/A
(MB2198-300 to target)
1–2
2DIR connected to 5V > LV4/2 direction A/B >
(target to MB2198-300)
2-3
2DIR connected to GND -> LV4/2 direction B/A
(MB2198-300 to target)
direction control
LV5 1DIR
JP60 (A8-A15)
direction control
LV5 2DIR
JP61 (A16-A23)
direction control
LV6 1DIR
JP62 (A24, A25)
direction control
LV6 2DIR
JP63 direction
control LV7
1DIR
JP64 (CSX0CSX7) direction
control LV7
2DIR
JP77 direction
control LV4
1DIR
JP78 direction
control LV4
2DIR
3.5
Data bus jumpers (D0-D31, JP1 – JP32)
Jumper
JP1 (D0)
JP2 (D1)
JP3 (D2)
Setting
Description
ON (closed)
P03_0 D0 > JP17 must be open
OFF (open)
Direction control via DIR (D0-D15 in all)
ON (closed)
P03_1 D1 > JP18 must be open
OFF (open)
Direction control via DIR (D0-D15 in all)
ON (closed)
P03_2 D2 > JP19 must be open
OFF (open)
Direction control via DIR (D0-D15 in all)
© Fujitsu Microelectronics Europe GmbH
- 11 -
UG-910021-14
PB-91467D-LS-208PFV V12
Chapter 3 Jumpers
JP4 (D3)
JP5 (D4)
JP6 (D5)
JP7 (D6)
JP8 (D7)
JP9 (D8)
JP10 (D9)
JP11 (D10)
JP12 (D11)
JP13 (D12)
JP14 (D13)
JP15 (D14)
JP16 (D15)
JP17 (D0)
ON (closed)
P03_3 D3 > JP20 must be open
OFF (open)
Direction control via DIR (D0-D15 in all)
ON (closed)
P03_4 D4 > JP21 must be open
OFF (open)
Direction control via DIR (D0-D15 in all)
ON (closed)
P03_5 D5 > JP22 must be open
OFF (open)
Direction control via DIR (D0-D15 in all)
ON (closed)
P03_6 D6 > JP23 must be open
OFF (open)
Direction control via DIR (D0-D15 in all)
ON (closed)
P03_7 D7 > JP24 must be open
OFF (open)
Direction control via DIR (D0-D15 in all)
ON (closed)
P02_0 D8 > JP25 must be open
OFF (open)
Direction control via DIR (D0-D15 in all)
ON (closed)
P02_1 D9 > JP26 must be open
OFF (open)
Direction control via DIR (D0-D15 in all)
ON (closed)
P02_2 D10 > JP27 must be open
OFF (open)
Direction control via DIR (D0-D15 in all)
ON (closed)
P02_3 D11 > JP28 must be open
OFF (open)
Direction control via DIR (D0-D15 in all)
ON (closed)
P02_4 D12 > JP29 must be open
OFF (open)
Direction control via DIR (D0-D15 in all)
ON (closed)
P02_5 D13 > JP30 must be open
OFF (open)
Direction control via DIR (D0-D15 in all)
ON (closed)
P02_6 D14 > JP31 must be open
OFF (open)
Direction control via DIR (D0-D15 in all)
ON (closed)
P02_7 D15 > JP32 must be open
OFF (open)
Direction control via DIR (D0-D15 in all)
ON (closed)
P03_0 D0 > in case of close JP17, JP1 must be
open. >Different directions selectable (JP55)
OFF (open)
JP18 (D1)
ON (closed)
OFF (open)
JP19 (D2)
ON (closed)
OFF (open)
JP20 (D3)
ON (closed)
OFF (open)
UG-910021-14
P03_1 D1 > in case of close JP18, JP2 must be
open. >Different directions selectable (JP55)
P03_2 D2 > in case of close JP19, JP3 must be
open. >Different directions selectable (JP55)
P03_3 D3 > in case of close JP20, JP4 must be
open. >Different directions selectable (JP55)
- 12 -
© Fujitsu Microelectronics Europe GmbH
PB-91467D-LS-208PFV V12
Chapter 3 Jumpers
JP21 (D4)
ON (closed)
OFF (open)
JP22 (D5)
ON (closed)
OFF (open)
JP23 (D6)
ON (closed)
OFF (open)
JP24 (D7)
ON (closed)
OFF (open)
JP25 (D8)
ON (closed)
OFF (open)
JP26 (D9)
ON (closed)
OFF (open)
JP27 (D10)
ON (closed)
OFF (open)
JP28 (D11)
ON (closed)
OFF (open)
JP29 (D12)
ON (closed)
OFF (open)
JP30 (D13)
ON (closed)
OFF (open)
JP31 (D14)
ON (closed)
OFF (open)
JP32 (D15)
ON (closed)
OFF (open)
3.6
P03_4 D4 > in case of close JP21, JP5 must be
open. >Different directions selectable (JP55)
P03_5 D5 > in case of close JP22, JP6 must be
open. >Different directions selectable (JP55)
P03_6 D6 > in case of close JP23, JP7 must be
open. >Different directions selectable (JP55)
P03_7 D7 > in case of close JP24, JP8 must be
open. >Different directions selectable (JP55)
P02_0 D8 > in case of close JP25, JP9 must be
open. >Different directions selectable (JP56)
P02_1 D9 > in case of close JP26, JP10 must be
open. >Different directions selectable (JP56)
P02_2 D10 > in case of close JP27, JP11 must be
open. >Different directions selectable (JP56)
P02_3 D11 > in case of close JP28, JP12 must be
open. >Different directions selectable (JP56)
P02_4 D12 > in case of close JP29, JP13 must be
open. >Different directions selectable (JP56)
P02_5 D13 > in case of close JP30, JP14 must be
open. >Different directions selectable (JP56)
P02_6 D14 > in case of close JP31, JP15 must be
open. >Different directions selectable (JP56)
P02_7 D15 > in case of close JP32, JP16 must be
open. >Different directions selectable (JP56)
Chip Select CSX0,1,2,3,6,7 Jumpers (JP33 – JP44)
Jumper
JP33 (CSX0)
Setting
ON (closed)
Description
P09_0 CSX0 / > JP39 must be open
OFF (open)
JP34 (CSX1)
ON (closed)
P09_1 CSX1 / > JP40 must be open
OFF (open)
JP35 (CSX2)
ON (closed)
P09_2 CSX2 / > JP41 must be open
OFF (open)
© Fujitsu Microelectronics Europe GmbH
- 13 -
UG-910021-14
PB-91467D-LS-208PFV V12
Chapter 3 Jumpers
JP36 (CSX3)
ON (closed)
P09_3 CSX3 / > JP42 must be open
OFF (open)
JP37 (CSX6)
ON (closed)
P09_6 CSX6 / > JP43 must be open
OFF (open)
JP38 (CSX7)
ON (closed)
P09_7 CSX7 / > JP44 must be open
OFF (open)
JP39 (CSX0)
ON (closed)
OFF (open)
JP40 (CSX1)
ON (closed)
OFF (open)
JP41 (CSX2)
ON (closed)
OFF (open)
JP42 (CSX3)
ON (closed)
OFF (open)
JP43 (CSX6)
ON (closed)
OFF (open)
JP44 (CSX7)
ON (closed)
OFF (open)
3.7
P09_0 CSX0 > in case of close JP39, JP33 must
be open. > Different directions via JP63 and JP64
P09_1 CSX1 > in case of close JP40, JP34 must
be open. > Different directions via JP63 and JP64
P09_2 CSX2 > in case of close JP41, JP35 must
be open. > Different directions via JP63 and JP64
P09_3 CSX3 > in case of close JP42, JP36 must
be open. > Different directions via JP63 and JP64
P09_6 CSX6 > in case of close JP43, JP37 must
be open. > Different directions via JP63 and JP64
P09_7 CSX7 > in case of close JP44, JP38 must
be open. >Different directions via JP63 and JP64
DMA Jumpers DACK, DEOP, DREQ (JP47 – JP50)
Jumper
Setting
JP47 (DACK
P13_1)
DMA
Acknowledge
1–2
1DACKX0 > V460_DACKX0 (MB2198-300)
2–4
V460_DACKX0 > DACKX0 (MB2198-300 to target)
2–3
2DACKX0 > V460_DACKX0 (MB2198-300)
JP48 (DEOP
P13_2)
1–2
1DEOP0 > V460_DEOP0 (MB2198-300)
2–4
V460_DEOP0 > DEOP0 (MB2198-300 to target)
DMA Request
2–3
2DEOP0 > V460_DEOP0 (MB2198-300)
JP49 (DREQ
P13_0) DMA
termination
output pin
1–2
1DREQ0 > V460_DREQ0 (MB2198-300)
2–4
V460_DREQ0 > DREQ0 (MB2198-300 to target)
2–3
2DREQ0 > V460_DREQ0 (MB2198-300)
1–2
4DACKX0 > DACKX0 (target)
2–3
5DACKX0 > DACKX0 (target)
open
JP47 set > V460_DACKX0
JP50 (DACKX)
P13_1
UG-910021-14
Description
- 14 -
© Fujitsu Microelectronics Europe GmbH
PB-91467D-LS-208PFV V12
Chapter 3 Jumpers
JP51 (DEOP)
P13_2
JP52 (DREQ)
P13_0
3.8
1–2
4DEOP0 > DEOP0 (target)
2–3
5DEOP0 > DEOP0 (target)
open
JP48 set > V460_DEOP0
1–2
4DREQ0 > DREQ0 (target)
2–3
5DREQ0 > DREQ0 (target)
open
JP49 set > V460_ DREQ0
ASX, RDY, BGRNTX, BRQ, BAAX, WEX (JP45, 46, 65-76, 88-90)
Jumper
Setting
JP45 (ASX)
ON (closed)
P10_1
OFF (open)
JP46 (RDY)
ON (closed)
JP66 must be open / target to MB2198-300
P08_7
OFF (open)
> Different directions selectable (JP64)
JP65 (ASX)
ON (closed)
JP45 must be open / MB2198-300 to target
P10_1
OFF (open)
> Different directions selectable (JP63)
JP66 (RDY)
ON (closed)
P08_7
OFF (open)
RDY P08_7 > in case of close JP66, JP46 must be
open. > Different directions selectable (JP63)
JP67
(BGRNTX)
P08_5
ON (closed)
OFF (open)
BGRNTX P08_5 > in case of close JP67, JP75
must be open. > Different directions selectable
(JP77)
JP68 (BRQ)
ON (closed)
JP76 must be open > target to MB2198-300
P08_6
OFF (open)
> Different directions selectable (JP77)
JP69 (BAAX)
ON (closed)
P10_2
OFF (open)
BAAX P10_2 > in case of close JP69, JP72 must
be open. > Different directions selectable (JP77)
JP70 (WEX)
ON (closed)
P10_3
OFF (open)
JP72 (BAAX)
ON (closed)
JP69 must be open > MB2198-300 to target
P10_2
OFF (open)
> Different directions selectable (JP78)
JP73 (WEX)
ON (closed)
JP70 must be open > MB2198-300 to target
P10_3
OFF (open)
> Different directions selectable (JP78)
JP75
(BGRNTX)
P08_5
ON (closed)
JP67 must be open > MB2198-300 to target
OFF (open)
> Different directions selectable (JP78)
JP76 (BRQ)
ON (closed)
P08_6
OFF (open)
BRQ P08_6 > in case of close JP76, JP68 must be
open. > Different directions selectable (JP78)
© Fujitsu Microelectronics Europe GmbH
Description
ASX P10_1 > in case of close JP45, JP65 must be
open. > Different directions selectable (JP64)
WEX P10_3 > in case of close JP70, JP73 must
be open. > Different directions selectable (JP77)
- 15 -
UG-910021-14
PB-91467D-LS-208PFV V12
Chapter 3 Jumpers
3.9
Other Jumper (JP88 – JP91)
Jumper
Setting
JP88
(MONCLK)
ON (closed)
JP89
ON (closed)
RDY pull up
OFF (open)
JP90
1-2
RDX for DIR
WEX or RDX
2-3
WEX for DIR
JP91 WEX or
V460_WEX
1-2
WEX for DIR
2-3
V460_WEX for DIR
UG-910021-14
Description
Test point only
OFF (open)
RDY via 10k> 3V3 > pull up
- 16 -
© Fujitsu Microelectronics Europe GmbH
PB-91467D-LS-208PFV V12
Chapter 4 Installation
4 Installation
- Remove carefully the board from the shipping carton.
- Check first if there are any damages before power on the evaluation board.
- Press carefully and smooth the YQ-PACK208SD or the QFP-EXTENDER-208PFV in the
YQ-SOCKET208SDN.
- Remove MCU out of the socket (NQ-PACK) before using the probe cable
The connection between YQ-SOCKET208SDN and YQ-PACK208SD
or QFP-EXTENDER-208PFV is only once pluggable, since otherwise
the pins can break off.
h: YQ-PACK208SD
f: PB-91467D-LS-208PFV
g: NQ-PACK208SD
j: YQ-SOCKET208SDN
o: Target Board
i: YQ-Guide
YQ-PACK208SD
© Fujitsu Microelectronics Europe GmbH
QFP-EXTENDER-208PFV
- 17 -
UG-910021-14
PB-91467D-LS-208PFV V12
Chapter 5 Dimensions
5 Dimensions
PB-91467D-LS-208PFV
UG-910021-14
- 18 -
© Fujitsu Microelectronics Europe GmbH
PB-91467D-LS-208PFV V12
Chapter 5 Dimensions
YQ-SOCKET208SDN
YQ-PACK208SD
© Fujitsu Microelectronics Europe GmbH
- 19 -
UG-910021-14
PB-91467D-LS-208PFV V12
Chapter 5 Dimensions
QFP-EXTENDER-208PFV (not included)
A,A´:
37mm
J:
1.2mm
B,B´:
30.65mm
n2´:
3mm
F:
31.60mm
n1,n1´: 51mm
UG-910021-14
- 20 -
© Fujitsu Microelectronics Europe GmbH
PB-91467D-LS-208PFV V12
Chapter 6 Information in the WWW
6 Information in the WWW
Information about FUJITSU MICROELECTRONICS Products
can be found on the following Internet pages:
Microcontrollers (8-, 16- and 32bit), Graphics Controllers
Datasheets and Hardware Manuals, Support Tools (Hard- and Software)
http://www.fme.gsdc.de/gsdc.htm
For more information about FUJITSU MICROELECTRONICS
http://www.emea.fujitsu.com/microelectronics
© Fujitsu Microelectronics Europe GmbH
- 21 -
UG-910021-14
PB-91467D-LS-208PFV V12
Chapter 7 China-RoHS regulation
7 China-RoHS regulation
Evaluation Board评估板
Emulation Board
仿真板
根据SJ/T11364-2006
《电子信息产品污染控制标识要求》特提供如下有关污染控制方面的信息。
The following product pollution control information is provided according to SJ/T11364-2006
Marking for Control of Pollution caused by Electronic Information Products.
1.电子信息产品污染控制标志说明 Explanation of Pollution Control Label
该标志表明本产品含有超过中国标准SJ/T11363-2006
《电子信息产品中有毒有害物质的限量要求》中限量的有毒有害物质。标志中的数字为本产品
的环保使用期,表明本产品在正常使用的条件下,有毒有害物质不会发生外泄或突变,用户使
用本产品不会对环境造成严重污染或对其人身、财产造成严重损害的期限,单位为年。
为保证所申明的环保使用期限,应按产品手册中所规定的环境条件和方法进行正常使用,并严
格遵守产品维修手册中规定的定期维修和保养要求。
产品中的消耗件和某些零部件可能有其单独的环保使用期限标志,并且其环保使用期限有可能
比整个产品本身的环保使用期限短。应到期按产品维修程序更换那些消耗件和零部件,以保证
所申明的整个产品的环保使用期限。
本产品在使用寿命结束时不可作为普通生活垃圾处理,应被单独收集妥善处理。
请注意:环保使用期限50年的指定不是与产品的耐久力,使用期限或任何担保要求等同的。
This symbol to be added to all EIO sold to China, indicates the product contains hazardous
materials in excess of the limits established by the Chinese standard SJ/T11363-2006
Requirements for Concentration Limits for Certain Hazardous Substances in Electronic
Information Products. The number in the symbol is the Environment-friendly Use Period
(EFUP), which indicates the period, starting from the manufacturing date, during which the
toxic or hazardous substances or elements contained in electronic information products will
not leak or mutate under normal operating conditions so that the use of such electronic
information products will not result in any severe environmental pollution, any bodily injury or
damage to any assets, the unit of the period is “Year”.
UG-910021-14
- 22 -
© Fujitsu Microelectronics Europe GmbH
PB-91467D-LS-208PFV V12
Chapter 7 China-RoHS regulation
In order to maintain the declared EFUP, the product shall be operated normally according to
the instructions and environmental conditions as defined in the product manual, and periodic
maintenance schedules specified in Product Maintenance Procedures shall be followed
strictly.
Consumables or certain parts may have their own label with an EFUP value less than the
product. Periodic replacement of those consumables or parts to maintain the declared EFUP
shall be done in accordance with the Product Maintenance Procedures.
This product must not be disposed of as unsorted municipal waste, and must be collected
separately and handled properly after decommissioning.
Please note: The designation of 10 years EFUP is not to be equated with the durability, useduration or any warranty-claims of the product.
产品中有毒有害物质或元素的名称及含量
Table of hazardous substances name and concentration
有毒有害物质或元素
部件名称
Hazardous substances name
Component Name
PB-91467D-LS-208PFV
铅
汞
镉
六价铬
多溴联苯
多溴二苯醚
(Pb)
(Hg)
(Cd)
(Cr(VI))
(PBB)
(PBDE)
x
o
o
o
o
o
O: 表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006
标准规定的限量要求以下
表示该有毒有害物质在该部件所有均质材料中的含量均在
X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T11363-2006
标准规定的限量要求
表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
•
•
此表所列数据为发布时所能获得的最佳信息
由于缺少经济上或技术上合理可行的替代物质或方案,此医疗设备运用以上一些有毒有害物质来实现设备的
预期临床功能,或给人员或环境提供更好的保护效果。
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement in SJ/T11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006.
•
Data listed in the table represents best information available at the time of publication
© Fujitsu Microelectronics Europe GmbH
- 23 -
UG-910021-14
PB-91467D-LS-208PFV V12
Chapter 8 Recycling
8 Recycling
Gültig für EU-Länder:
Gemäß der Europäischen WEEE-Richtlinie und deren Umsetzung in landesspezifische
Gesetze nehmen wir dieses Gerät wieder zurück.
Zur Entsorgung schicken Sie das Gerät bitte an die folgende Adresse:
Fujitsu Microelectronics Europe GmbH
Warehouse/Disposal
Monzastraße 4a
63225 Langen
Valid for European Union Countries:
According to the European WEEE-Directive and its implementation into national laws we
take this device back.
For disposal please send the device to the following address:
Fujitsu Microelectronics Europe GmbH
Warehouse/Disposal
Monzastraße 4a
63225 Langen
UG-910021-14
- 24 -
© Fujitsu Microelectronics Europe GmbH