PVG612AS-T

Series PVG612APbF Microelectronic Power IC HEXFET® Power MOSFET Photovoltaic Relay Single-Pole, Normally-Open, 0-60V, 2.0A AC / 4.0A DC General Description The PVG612A Series Photovoltaic Relay is a single-pole, normally open solid-state relay that can replace electromechanical relays in many applications. It utilizes International Rectifier’s proprietary HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator. These units exceed the performance capabilities of electromechanical relays in operating life, sensitivity, stability of on-resistance, miniaturization, insensitivity to magnetic fields and ruggedess. The compact PVG612A is particularly suited for isolated switching of high currents from 12 to 48 Volt AC or DC power sources. Series PVG612A Relays are packaged in a 6pin, molded DIP package with either thru-hole or surface mount (gull-wing) terminals. It is available in standard plastic shipping tubes or on tape-andreel. Please refer to Part Identification information opposite. Features Bounce-free operation High load current capacity High off-state resistance Linear AC/DC operation 4,000 VRMS I/O Isolation Solid-State reliability UL recognized ESD Tolerance: 4000V Human Body Model 500V Machine Model Applications Programmable Logic Controllers Computers and Peripheral Devices Audio Equipment Power Supplies and Power Distribution Control of Displays and Indicators Industrial Automation Part Identification PVG612APbF PVG612ASPbF PVG612AS-TPbF thru-hole surface-mount surface-mount, tape and reel (HEXFET is the registered trademark for International Rectifier Power MOSFETs) 1 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback May 04, 2015 Series PVG612APbF Electrical Specifications (-40°C ≤ TA ≤ +85°C unless otherwise specified) INPUT CHARACTERISTICS Limits Units Minimum Control Current (see figure 1) Maximum Control Current for Off-State Resistance @ TA = +25°C Control Current Range (Caution: current limit input LED, see figure 6) Maximum Reverse Voltage (1mA max.) 5.0 0.4 5.0 - 25 6.0 mA mA mA V OUTPUT CHARACTERISTICS Limits Units Operating Voltage Range Maximum Continuous Load Current @ TA = +40°C, 10mA Control (see figure 1) A Connection B Connection C Connection Maximum Pulsed Load Current @ TA =+25°C (100 ms @ 10% Duty Cycle) A Connection B Connection C Connection Typical Thermal Resistance (Rthja, Junction-to-Ambient) A Connection B Connection C Connection Maximum On-State Resistance @TA =+25°C For 1A pulsed load, 10mA Control (see figure 4) A Connection B Connection C Connection Maximum Off-State Leakage @ 60V, TA =+25°C Maximum Turn-On Time @TA =+25°C (see figures 7 & 8) For 500mA, 50VDC load, 10mA Control, 10mS pulse width Maximum Turn-Off Time @TA =+25°C (see figures 7 & 8) For 500mA, 50VDC load, 10mA Control, 10mS pulse width Typical Output Capacitance @ Vdd=50V, f=1MHz (see figure 2) 0 to ±60 V(DC or AC peak) 2.0 2.5 4.0 A (AC or DC) A (DC) A (DC) 7.5 8.5 15.5 A (AC or DC) A (DC) A (DC) 79.1 112.2 81.0 (°C/W) (°C/W) (°C/W) 100 50 35 1.0 mΩ mΩ mΩ µΑ 3.5 ms 0.5 105 ms pF GENERAL CHARACTERISTICS Limits Units 4000 1012 1.0 +260 -40 to +85 -40 to +100 VRMS Ω pF Minimum Dielectric Strength, Input-Output Minimum Insulation Resistance, Input-Output, @TA =+25°C, 50%RH, 100VDC Maximum Capacitance, Input-Output Maximum Pin Soldering Temperature (10 seconds maximum) Ambient Temperature Range: Operating Storage °C International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications. Users of this International Rectifier product in such applications assume all risks of such use and indemnify International Rectifier against all damages resulting from such use. 2 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback May 04, 2015 Series PVG612APbF Connection Diagrams 5,0 5.0 10m A ILED==10mA ILED “C”Connection Connection "C" 3.0 Typical Capacitance (pF) Max. Load Current (A) 4.0 “B”Connection Connection "B" 2.0 "A" “A”Connection Connection 1.0 0.0 00 20 20 40 40 60 60 80 80 900 850 800 750 700 650 600 550 500 450 400 350 300 250 200 150 100 50 0 "A" Connection 0 100 100 10 20 30 40 VDD Drain to Drain Voltage Ambient Temperature (C) Figure 1. Current Derating Curves 100 80 4 70 0 -0.3 -0.2 -0.1 0.0 -2 0.1 -4 -6 0.2 0.3 0.4 0.5 I LED= 10mA Pulsed, 25C -8 Voltage Drop VDD Figure 3. Typical Linearity Characteristics 3 www.irf.com © 2015 International Rectifier RDDS0n (mohm) ) Load Current (A)( 90 6 2 -0.4 60 Figure 2. Typical Output Capacitance 8 -0.5 50 "A" Connection 60 50 "B" Connection 40 "C" Connection 30 20 10 0 0 25 50 75 100 Temperature (C) Figure 4. Typical Normalized On-Resistance Submit Datasheet Feedback May 04, 2015 20 16 3.0 1.0 12 8 Min. devic e Input Current (mA) ID-OFF / ID-OFF 25oC 10 4 0.3 0.1 -35 -15 5 25 45 65 85 105 0 TYPICAL 30 C AU TIO N: pro vid e cu rrent lim iting so that 25 m A m axim u m stead ystate contro l cu rren t ratin g is n o t ex ceed ed and +85 de g. C limit 100 0 0.5 Ambient Temperature (oC) Max. devic e and -40 deg. C lim it Series PVG612APbF 1.0 1.5 2.0 LED Forward Voltage Drop (Volts DC) Figure 5. Typical Normalized Off-State Leakage Figure 6. Input Characteristics (Current Controlled) 10.00 Ton Tdly Delay Tims (mS) 1.00 I LED Toff 90% 0.10 I 0.01 0 5 10 15 20 D 10% tdly to n t o ff ILED (mA) Figure 7. Typical Delay Times 4 www.irf.com © 2015 International Rectifier Figure 8. Delay Time Definitions Submit Datasheet Feedback May 04, 2015 Series PVG612APbF Case Outlines 01-2008 01 01-2009 01 Note: For the most current drawing please refer to IR website at: http://www.irf.com/package/ 5 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback May 04, 2015 Series PVG612APbF Qualification information† Qualification level Moisture Sensitivity Level RoHS compliant Industrial †† (per JEDEC JESD47I guidelines) PVG612APbF N/A PVG612ASPbF MSL4 PVG612AS-TPbF (per JEDEC J-STD-020E & JEDEC J-STD-033C ††) Yes † Qualification standards can be found at International Rectifier’s web site: http://www.irf.com/product-info/reliability †† Applicable version of JEDEC standard at the time of product release Revision History Date 5/4/2015 Comments • Added Qualification Information Table on page 6 • Updated data sheet with new IR corporate template IR WORLD HEADQUARTERS: 101 N. Sepulveda Blvd., El Segundo, California 90245, USA Data and specifications subject to change without notice To contact International Rectifier, please visit http://www.irf.com/whoto-call/ 6 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback May 04, 2015