PVG613S-T

Series PVG613PbF Microelectronic Power IC HEXFET® Power MOSFET Photovoltaic Relay Single-Pole, Normally-Open, 0-60V, 1.0A AC / 2.0A DC General Description The PVG613 Series Photovoltaic Relay is a singlepole, normally open solid-state relay that can replace electromechanical relays in many applications. It utilizes International Rectifier’s proprietary HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator. These units exceed the performance capabilities of electromechanical relays in operating life, sensitivity, stable on-resistance, low off-state leakage, miniaturization, insensitivity to magnetic fields and ruggedess. The compact PVG613 is particularly suited for isolated switching of high currents from 12 to 48 Volt AC or DC power sources. Series PVG613 Relays are packaged in a 6-pin, molded DIP package with either thru-hole or surface mount (gull-wing) terminals. It is available in standard plastic shipping tubes or on tape-and-reel. Please refer to Part Identification information opposite. Features ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ Bounce-free operation High load current capacity Extremely low off-state leakage Linear AC/DC operation 4,000 VRMS I/O Isolation Solid-State reliability UL recognized ESD Tolerance: 4000V Human Body Model 500V Machine Model Applications ƒ ƒ ƒ ƒ ƒ Industrial Control Computers and Peripheral Devices Audio Equipment Power Supplies and Power Distribution Factory Automation Part Identification PVG613PbF PVG613SPbF PVG613S-TPbF thru-hole surface-mount surface-mount, tape and reel (HEXFET is the registered trademark for International Rectifier Power MOSFETs) 1 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback May 04, 2015 Series PVG613PbF Electrical Specifications (-40°C ≤ TA ≤ +85°C unless otherwise specified) INPUT CHARACTERISTICS Limits Units Minimum Control Current (see figure 1) Maximum Control Current for Off-State Resistance @ TA = +25°C Control Current Range (Caution: current limit input LED, see figure 6) Maximum Reverse Voltage 5.0 0.4 5.0 to 25 6.0 mA mA mA V OUTPUT CHARACTERISTICS Limits Units Operating Voltage Range Maximum Load Current @ TA = +40°C, 10mA Control (see figure 1) A Connection B Connection C Connection Maximum Pulsed Load Current @ TA =+25°C (100 ms @ 10% Duty Cycle) A Connection Maximum On-State Resistance @TA =+25°C For 1A pulsed load, 10mA Control (see figure 4) A Connection B Connection C Connection Maximum Off-State Leakage @TA =+25°C, ±48V (see figure 5) Maximum Turn-On Time @TA =+25°C (see figure 7) For 500mA, 50 VDC load, 10mA Control Maximum Turn-Off Time @TA =+25°C (see figure 7) For 500mA, 50 VDC load, 10mA Control Maximum Output Capacitance @ 50VDC (see figure 2) 0 to ±60 V(DC or AC peak) 1.0 1.5 2.0 A (AC or DC) A (DC) A (DC) 2.4 A (AC or DC) 500 250 150 10 mΩ mΩ mΩ nA 2.0 ms 0.5 130 ms pF GENERAL CHARACTERISTICS Limits Units 4000 1012 1.0 +260 -40 to +85 -40 to +100 VRMS Ω pF Minimum Dielectric Strength, Input-Output Minimum Insulation Resistance, Input-Output, @TA =+25°C, 50%RH, 100VDC Maximum Capacitance, Input-Output Maximum Pin Soldering Temperature (10 seconds maximum) Ambient Temperature Range: Operating Storage °C International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications. Users of this International Rectifier product in such applications assume all risks of such use and indemnify International Rectifier against all damages resulting from such use. Connection Diagrams 2 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback May 04, 2015 Series PVG613PbF 1.25 I 'A ' C o nnectio n Typical C apa citance (pF) 1.00 M ax. Lo ad C urrent (A ) 600 'A ' C o nnectio n LED = 10 m A 5 mA 0.75 0.50 0.25 20 40 60 80 300 150 0 0 0 0 450 100 15 30 45 60 Vdd, Drain to D rain Vo lta ge (V ) A m b ient Tem p era ture (deg. C ) Figure 1. Current Derating Curves* Figure 2. Typical Output Capacitance * Derating of ‘B’ and ‘C’ connection at +85°C will be 70% of that specified at +40°C and is linear from +40°C to +85°C. 2.5 1.00 0.7 5 Lo ad C urrent (A ) 0.50 0.25 -0.5 -0.4 -0.3 -0.2 -0.1 0.1 0.2 0.3 0.4 0.5 -0 .2 5 10 m A C o ntrol -0 .5 0 @ 25C , p ulse d -0 .7 5 Rd-o n (N o rm alized to 25 deg. C ) 1.25 'A ' C o n nectio n 10 m A C o ntro l I D = 500 m A 2.0 1.5 1.0 0.5 -1 .0 0 -1 .2 5 C o nn ectio n 'A ' V o lta ge D ro p (V dd) Figure 3. Linearity Characteristics 3 www.irf.com © 2015 International Rectifier 0 -50 -25 0 25 50 75 100 125 A m bient Tem p erature (deg. C ) Figure 4. Typical Normalized On-Resistance Submit Datasheet Feedback May 04, 2015 20 3.0 1.0 12 8 4 0.3 -15 5 25 45 65 85 0 105 0 2.0 0.5 1.0 1.5 LED Fo rw ard V o ltag e D ro p (V o lts DC ) A m bient Tem p era ture (d eg. C ) Figure 5. Typical Normalized Off-State Leakage TYP IC AL Input C urrent (m A ) 16 10 0.1 -35 CAUTION: provid e current lim iting so that 25 m A m axim um steadystate control cu rrent rating is not exceed ed M in. de vic e a nd +85 d eg . C lim it 30 I D -O FF / I D -O FF 25 d eg. C 100 M ax . d ev ice a nd -40 de g . C lim it Series PVG613PbF Figure 6. Input Characteristics (Current Controlled) LED C urrent (m A ) 20 10 I LED t on t d ly 90% 5 3 20 t o ff I 50 100 200 500 1000 2000 D ela y Tim e (m icro seco nds) Figure 7. Typical Delay Times 4 www.irf.com © 2015 International Rectifier D 10% tdly t on t off Figure 8. Delay Time Definitions Submit Datasheet Feedback May 04, 2015 Series PVG613PbF Case Outlines 01-2008 01 01-2009 01 Note: For the most current drawing please refer to IR website at: http://www.irf.com/package/ 5 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback May 04, 2015 Series PVG613PbF Qualification information† Qualification level Moisture Sensitivity Level RoHS compliant Industrial †† (per JEDEC JESD47I guidelines) PVG613PbF N/A PVG613SPbF MSL4 PVG613S-TPbF (per JEDEC J-STD-020E & JEDEC J-STD-033C ††) Yes † Qualification standards can be found at International Rectifier’s web site: http://www.irf.com/product-info/reliability †† Applicable version of JEDEC standard at the time of product release Revision History Date 5/4/2015 Comments • Added Qualification Information Table on page 6 • Updated data sheet with new IR corporate template IR WORLD HEADQUARTERS: 101 N. Sepulveda Blvd., El Segundo, California 90245, USA Data and specifications subject to change without notice To contact International Rectifier, please visit http://www.irf.com/whoto-call/ 6 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback May 04, 2015