PVX6012

Series PVX6012PbF Microelectronic Power IC HEXFET® Power MOSFET Photovoltaic Relay Single Pole, Normally Open, 0-280VAC (RMS) or 0-400VDC, 1.0A AC/DC General Description The PVX6012 Photovoltaic Relay is a single-pole, normally open solid-state relay that can replace electromechanical relays in many applications. It utilizes an IGBT output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator. The PVX6012 is ideally suited for switching medium power loads. It offers high operating speed, low and stable on-state voltage drop as well as low off-state leakage current. PVX6012 relays are packaged in a 14-pin, molded DIP package in thru-hole. It is available in standard plastic shipping tubes. Features           IGBT and HEXFRED™ output 600 Vp blocking voltage 1 ARMS/ 1 A DC load current 3,750 VRMS I/O isolation Solid-state reliability High input sensitivity Low off-state leakage current Bounce-free and arc-free operation No EMI generation UL508 recognized Applications        Industrial controls and automation Test equipment Instrumentation Motor control Robotics Electromechanical Relay replacement Mercury-wetted Relay replacement Part Identification PVX6012PbF thru-hole (HEXFET is the registered trademark for International Rectifier’s power MOSFETs) 1 www.infineon.com/ssr June 05, 2019 Series PVX6012PbF Electrical Specifications (-40°C ≤ TA ≤ +85°C unless otherwise specified) INPUT CHARACTERISTICS Limits Units Minimum Control Current (see figure 1) Maximum Control Current for Off-State Leakage @TA =+25°C Control Current Range (Caution: current limit input LED, see figure 6) Maximum Reverse Voltage 5.0 0.4 5.0 to 25 6.0 mA mA mA V OUTPUT CHARACTERISTICS Limits Units 600 0-280 0-400 1.0 1.0 V(DC or AC peak) V(AC) RMS V(DC) A(DC) A (AC) RMS non-repetitive, 1 sec. non-repetitive 20 msec. (see figure 2) Maximum On-State Voltage Drop @TA =+25°C For 1A pulsed load, 5mA Control (see figures 3 and 4) 5 20 2.5 A(DC) Maximum Off-State Leakage @TA =+25°C, ± 400V (see figure 5) Maximum Turn-On Time @TA =+25°C (see figure 8) For 1A, 400 VDC load, 5mA Control Maximum Turn-Off Time @TA =+25°C (see figure 8) For 1A, 400 VDC load, 5mA Control Maximum Output Capacitance @ 100V DC (see figure 7) 10 7 μA ms 1 ms 50 pF Transient Overvoltage Protection Operating Voltage Maximum Load Current @ TA = +40°C 5mA Control (see figure 1 and Note 1) Maximum Surge Current A(DC) V Notes: ÿ Load handling capability to 0.2 power factor requires overvoltage tection. GENERAL CHARACTERISTICS Minimum Dielectric Strength, Input-Output Minimum Insulation Resistance, Input-Output @TA =+25°C, 50%RH, 100V DC Maximum Capacitance, Input-Output Maximum Pin Soldering Temperature (10 seconds maximum) Ambient Temperature Range: Operating Storage International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications. Users of this International Rectifier product in such applications assume all risks of such use and indemnify International Rectifier against all damages resulting from such use. 2 www.infineon.com/ssr Limits 3750 10 12 Units VRMS Ω 1.0 +260 -40 to +85 -40 to +100 pF °C Connection Diagram June 05, 2019 Series PVX6012PbF 1.4 25 Max. DC Surge Current (A) Load Current (Amps) 1.2 1 0.8 0.6 0.4 0.2 0 0 20 40 60 80 20 15 10 5 0 0.01 100 0.02 0.05 0.1 0.5 1 5 10 Surge Duration (Sec.) Am bient Tem perature (deg. C) Figure 1. Current Derating Curve Figure 2. Surge Current Capability 1.1 2.5 1.5 Load Current (Amps) 1.0 0.5 -3.0 -2.5 -2.0 -1.5 -1.0 0.0 -0.5 0.0 -0.5 0.5 1.0 1.5 2.0 2.5 3.0 -1.0 -1.5 -2.0 Vf-On (Normalized to 25 deg. C) 2.0 1.05 1 0.95 0.9 -2.5 -50 Voltage Drop (Vdd) -25 0 25 50 75 100 125 Ambient Temperature (deg.C) Figure 3. Ouput Characteristics Figure 4. Typical Normalized VCEON 25 deg. C g 1000 Ic off /Ic off 10 0.1 -35 -15 5 25 45 65 85 105 Ambient Temperature (deg. C) Figure 5. Typical Normalized Off-State Leakage 3 www.infineon.com/ssr Figure 6. Input Characteristics (Current Controlled) June 05, 2019 Series PVX6012PbF 30 6 Delay Time (milliseconds) Typical Capacitance (pF) 28 26 24 22 20 18 16 14 12 10 100 5 4 TON 3 2 1 TOFF 0 200 300 400 500 5 Vcc, Collector to Collector Voltage (V) 10 20 LED Current (mA) Figure 7. Typical Output Capacitance Figure 8. Typical Delay Times Figure 9. Delay Time Definitions Case Outline 01-3062 00 Note: For the most current drawing please refer to IR website at: http://www.irf.com/package/ 4 www.infineon.com/ssr June 05, 2019 Series PVX6012PbF Qualification information† Qualification level Moisture Sensitivity Level RoHS compliant Indus trial †† (per JE DE C JE S D47I guidelines ) PVX6012PbF N/A Yes † Qualification standards can be found at International Rectifier’s web site: http://www.irf.com/product-info/reliability †† Applicable version of JEDEC standard at the time of product release Revision History Date 6/9/2015 6/5/2019 Comment • Added Qualification Information table on page 5. • Updated data sheet based on corporate template. • Updated Feature List on Page 1. • Updated Application List on Page 1. IR WORLD HEADQUARTERS: 101 N. Sepulveda Blvd., El Segundo, California 90245, USA Data and specifications subject to change without notice 5 www.infineon.com/ssr June 05, 2019