S6T3J300113A144A2

AN203911 Getting Started With The Traveo™ Family S6J3110 Series Author: Masahiro Niimi Associated Part Family: Traveo Family S6J3110 Series Related Documents: For a complete list, Related Documents AN203911 describes the development tools available for the Traveo™ Family S6J3110 Series. 1 Introduction This application note describes the development environment and tools for the TraveoTM Family S6J3110 Series. This series includes an ARM Cortex-R5 CPU core, Secure Hardware Extension (SHE), CAN FD, memory, and analog and digital peripheral functions in a single chip supplied by a 5-V single power supply. The product lineup of the S6J3110 series features 176-pin and 144-pin packages and memory size variations. Refer to the fact sheet and data sheet for more details. 2 TraveoTM Family S6J3110 Series Feature Set The Traveo S6J3110 Series features a single ARM Cortex-R5. The S6J3110 incorporates the high-performance CAN FD interface for enhanced in-vehicle networking and is focused on various automotive applications. Figure 1 shows many peripheral resources. Figure 1. TraveoTM Family S6J3110 Series Block Diagram 30 x Base Timer 16bit 64 x ADC 12bit (2units) 16 x External IRQ 16 x DMA 2 x CAN FD 22 x Multi Function Serial Memory Protection Unit Peripheral Protection Unit Cyclic Redundacy Check Power Management Flash Security ECC WorkFlash RAM Diagonal RAM D-Cache 16KB Backup RAM I-Cache 16KB SHE 6 x Free Run Timer 32bit 12 x Input Capture Unit 32bit 12 x Output Compare Unit 32bit Time Protection Unit Low Voltage Detector Oscillators Real Time Clock PLLs SSCG PLL ARM Cortex-R5 144 MHz Safety, Security Watchdog CSV www.cypress.com Document No. 002-03911 Rev. *A 1 Getting Started with the Traveo™ Family S6J3110 Series Below is a list of major features of the S6J3110 series. For more information, see the related documents. Features:  Up to 144MHz ARM® Cortex®-R5 core  Including a DMA controller and a SHE (Secure Hardware Extension) for encryption engine.  Including Flash memory for code and data, and System SRAM, Backup RAM, and TCRAM. Flash memory for program code: up to 4MB, for work data: up to 112KB. System SRAM: up to 256KB, Backup RAM: up to 64KB, TCRAM: 64KB  12-bits A/D Converter, CAN FD, several Timers, MFS (Lin, UART, CSIO, I2C) and peripheral functions included.  JTAG I/F for debug and programming user programs are included. 3 Development Environment and Tools 3.1 Evaluation Board Cypress provides a wealth of evaluation boards to help you get started using an MCU. The S6J3110 series evaluation board works alone, but it also connects to a main board. The main board is common use to the FR81S Family products and F2MC-16FX Family MB96600 Series. This board has useful ports including LIN, CAN, UART, and more. Contact your sales representative or Cypress Technical Support, if you want to buy the evaluation board. Table 2 lists the current available part numbers for the S6J3110 series evaluation boards. Table 3 lists the main board. Table 2. S6J3110 Series Evaluation Boards Part Number S6T3J300111A176A2 S6T3J300112A144A2 S6T3J300113A144A2 Description Evaluation board for S6J311EJAB mounted Evaluation board for S6J311EHAB mounted Evaluation board for S6J311AHAB mounted Pins 176 144 144 CAN FD port 2ch 1ch 1ch LIN port 1ch 1ch 1ch UART port 1ch 1ch 1ch Debug port JTAG ARM 20 JTAG ARM 20 JTAG ARM 20 RESET, NMI, INT RESET, NMI, INT RESET, NMI, INT Switches Table 3. Evaluation board (main board) Part Number Description Connector Switches MB2198-760-E MCU Evaluation board (main Board) 2 Connect to the S6J3110 Series evaluation board and F MC-16FX/FR Family board LIN I/F 2ch, CAN I/F 2ch, RS I/F 2ch, USB Reset, NMI, INT For more information for main board, see the operation manual. www.cypress.com Document No. 002-03911 Rev. *A 2 Getting Started with the Traveo™ Family S6J3110 Series 3.2 Sample software Contact your sales representative or Cypress Technical Support, if you want to use the sample software. 3.3 Debugging Tools Debugging tools are provided by third parties, as listed in Table 4 Cypress provides sample software (template project and sample driver) for each tool. The template project includes IO header files, startup setting, and some sample sources. It is very helpful to start using the S6J3110 series with the evaluation board and tools. The sample driver includes some sources for peripheral features of the S6J3110 series. Note: Cypress software such as AUTOSAR is designed for using with MULTI of Green Hills Software. Table 4. Debugging Tools Vendor Green Hills Software IAR Systems 4 Software (Integrated Development Environment) MULTI v2013.5.4 or later IAR Embedded Workbench for ARM (EWARM) v7.30.4 or later Hardware (Debugging Tools) Green Hills Probe I-jet Connection Diagram and Operation Mode The S6J3110 series has JTAG ports to connect with a debugging tool, but the nSRST JTAG port is not supported in this series. Therefore, nSRST should be connected to the RSTX port of this product, if needed. Figure 5 shows a basic connection diagram for S6J311EJ. Figure 5. S6J311EJ Basic Connection Diagram with ARM JTAG 20 www.cypress.com Document No. 002-03911 Rev. *A 3 Getting Started with the Traveo™ Family S6J3110 Series The S6J3110 series has a User mode and Serial Write modes. Figure 5 shows the User mode connection. The Serial Write modes use P020 and P022 with the MD port. Table 6 lists the operation modes combined with the MD, P020, and P022 ports. Serial Write mode (sync, async) supports writing a user program to the flash memory included in the MCU through the UART connection. The PC and target MCU are connected via a serial cable. Cypress provides flash program software that works on the PC, and both the main and sub evaluation boards have a UART port. Contact your sales representative or Cypress Technical Support, if you want to evaluate the flash program software. In addition, a flash memory programmer provided by Yokogawa Digital Computer (YDC) supports writing a user program to the flash memory using a serial port in the S6J3110 series. Table 6. Operation Modes Operation Mode 5 MD Pin P020 P022 User mode 1 – – Serial Write mode (Sync) 0 1 0 Serial Write mode (Async) 0 1 1 Summary Cypress provides a wealth of evaluation boards and sample software to help you to get started with Traveo. To evaluate S6J3110 series evaluation boards, contact your sales representative or Cypress Technical Support. 6 Related Documents S6J3110 Series 32-bit Microcontroller Traveo Family Fact Sheet S6J3110 Series 32-bit Microcontroller Traveo Family Data Sheet S6J3110 Series 32-Bit Microcontroller Traveo Family Hardware Manual (Contact Technical Support) www.cypress.com Document No. 002-03911 Rev. *A 4 Getting Started with the Traveo™ Family S6J3110 Series Document History Document Title: AN203911 - Getting Started with the Traveo™ Family S6J3110 Series Document Number: 002-03911 Revision ECN Orig. of Change Submission Date ** 5003893 MXNI 05/20/2016 New application note. *A 5840737 AESATMP9 08/01/2017 Updated logo and copyright. www.cypress.com Description of Change Document No. 002-03911 Rev. *A 5 Getting Started with the Traveo™ Family S6J3110 Series Worldwide Sales and Design Support Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office closest to you, visit us at Cypress Locations. PSoC® Solutions Products ARM® Cortex® Microcontrollers cypress.com/arm PSoC 1 | PSoC 3 | PSoC 4 | PSoC 5LP | PSoC 6 Automotive cypress.com/automotive Cypress Developer Community Clocks & Buffers cypress.com/clocks Interface cypress.com/interface Internet of Things cypress.com/iot Memory cypress.com/memory Microcontrollers cypress.com/mcu PSoC cypress.com/psoc Power Management ICs cypress.com/pmic Touch Sensing cypress.com/touch USB Controllers cypress.com/usb Wireless Connectivity cypress.com/wireless Forums | WICED IOT Forums | Projects | Videos | Blogs | Training | Components Technical Support cypress.com/support All other trademarks or registered trademarks referenced herein are the property of their respective owners. Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 © Cypress Semiconductor Corporation, 2016-2017. This document is the property of Cypress Semiconductor Corporation and its subsidiaries, including Spansion LLC (“Cypress”). This document, including any software or firmware included or referenced in this document (“Software”), is owned by Cypress under the intellectual property laws and treaties of the United States and other countries worldwide. Cypress reserves all rights under such laws and treaties and does not, except as specifically stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other intellectual property rights. If the Software is not accompanied by a license agreement and you do not otherwise have a written agreement with Cypress governing the use of the Software, then Cypress hereby grants you a personal, non-exclusive, nontransferable license (without the right to sublicense) (1) under its copyright rights in the Software (a) for Software provided in source code form, to modify and reproduce the Software solely for use with Cypress hardware products, only internally within your organization, and (b) to distribute the Software in binary code form externally to end users (either directly or indirectly through resellers and distributors), solely for use on Cypress hardware product units, and (2) under those claims of Cypress’s patents that are infringed by the Software (as provided by Cypress, unmodified) to make, use, distribute, and import the Software solely for use with Cypress hardware products. Any other use, reproduction, modification, translation, or compilation of the Software is prohibited. TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE OR ACCOMPANYING HARDWARE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. To the extent permitted by applicable law, Cypress reserves the right to make changes to this document without further notice. Cypress does not assume any liability arising out of the application or use of any product or circuit described in this document. Any information provided in this document, including any sample design information or programming code, is provided only for reference purposes. It is the responsibility of the user of this document to properly design, program, and test the functionality and safety of any application made of this information and any resulting product. Cypress products are not designed, intended, or authorized for use as critical components in systems designed or intended for the operation of weapons, weapons systems, nuclear installations, life-support devices or systems, other medical devices or systems (including resuscitation equipment and surgical implants), pollution control or hazardous substances management, or other uses where the failure of the device or system could cause personal injury, death, or property damage (“Unintended Uses”). A critical component is any component of a device or system whose failure to perform can be reasonably expected to cause the failure of the device or system, or to affect its safety or effectiveness. Cypress is not liable, in whole or in part, and you shall and hereby do release Cypress from any claim, damage, or other liability arising from or related to all Unintended Uses of Cypress products. You shall indemnify and hold Cypress harmless from and against all claims, costs, damages, and other liabilities, including claims for personal injury or death, arising from or related to any Unintended Uses of Cypress products. Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, WICED, PSoC, CapSense, EZ-USB, F-RAM, and Traveo are trademarks or registered trademarks of Cypress in the United States and other countries. For a more complete list of Cypress trademarks, visit cypress.com. Other names and brands may be claimed as property of their respective owners. www.cypress.com Document No. 002-03911 Rev. *A 6