SPI80N06S2-07

SPI80N06S2-07 SPP80N06S2-07,SPB80N06S2-07 OptiMOS Power-Transistor Product Summary Feature • N-Channel VDS 55 V • Enhancement mode R DS(on) 6.6 mΩ ID 80 A • 175°C operating temperature • Avalanche rated P- TO262 -3-1 P- TO263 -3-2 P- TO220 -3-1 • dv/dt rated Type SPP80N06S2-07 Package P- TO220 -3-1 Ordering Code Q67060-S6024 Marking SPB80N06S2-07 P- TO263 -3-2 Q67060-S6026 2N0607 SPI80N06S2-07 P- TO262 -3-1 Q67060-S6037 2N0607 2N0607 Maximum Ratings, at Tj = 25 °C, unless otherwise specified Parameter Symbol Continuous drain current 1) Value Unit A ID 80 TC=25°C 80 ID puls 320 EAS 530 Repetitive avalanche energy, limited by Tjmax 2) EAR 25 Reverse diode dv/dt dv/dt 6 Gate source voltage VGS ±20 V Power dissipation Ptot 250 W -55... +175 °C Pulsed drain current TC=25°C Avalanche energy, single pulse mJ ID=80A, V DD=25V, RGS=25Ω kV/µs IS=80A, VDS=44V, di/dt=200A/µs, T jmax=175°C TC=25°C Operating and storage temperature T j , Tstg 55/175/56 IEC climatic category; DIN IEC 68-1 Page 1 2003-05-09 SPI80N06S2-07 SPP80N06S2-07,SPB80N06S2-07 Thermal Characteristics Parameter Symbol Values Unit min. typ. max. Characteristics Thermal resistance, junction - case RthJC - 0.4 0.6 Thermal resistance, junction - ambient, leaded RthJA - - 62 SMD version, device on PCB: RthJA - - 62 - - 40 @ min. footprint @ 6 cm2 cooling area 3) K/W Electrical Characteristics, at Tj = 25 °C, unless otherwise specified Parameter Symbol Values Unit min. typ. max. V(BR)DSS 55 - - VGS(th) 2.1 3 4 Static Characteristics Drain-source breakdown voltage V V GS=0V, ID=1mA Gate threshold voltage, VGS = V DS ID=180µA Zero gate voltage drain current µA IDSS V DS=55V, VGS=0V, Tj=25°C - 0.01 1 V DS=55V, VGS=0V, Tj=125°C - 1 100 IGSS - 1 100 nA RDS(on) - 5.6 6.6 mΩ Gate-source leakage current V GS=20V, VDS=0V Drain-source on-state resistance V GS=10V, I D=68A 1Current limited by bondwire ; with an RthJC = 0.6K/W the chip is able to carry ID= 135A at 25°C, for detailed information see app.-note ANPS071E available at www.infineon.com/optimos 2Defined by design. Not subject to production test. 3Device on 40mm*40mm*1.5mm epoxy PCB FR4 with 6cm² (one layer, 70 µm thick) copper area for drain connection. PCB is vertical without blown air. Page 2 2003-05-09 SPI80N06S2-07 SPP80N06S2-07,SPB80N06S2-07 Electrical Characteristics Parameter Symbol Conditions Values Unit min. typ. max. 51 102 - Dynamic Characteristics Transconductance gfs VDS ≥2*ID *RDS(on)max, S ID =80A Input capacitance Ciss VGS =0V, VDS =25V, - 3400 4540 pF Output capacitance Coss f=1MHz - 880 1100 Reverse transfer capacitance Crss - 215 320 Turn-on delay time td(on) VDD =30V, VGS =10V, - 16 24 Rise time tr ID =80A, - 37 56 Turn-off delay time td(off) RG =3.3Ω - 61 91 Fall time tf - 36 54 - 18 24 - 35 53 - 86 110 V(plateau) VDD =44V, ID =80A - 4.9 - V IS - - 80 A - - 320 ns Gate Charge Characteristics Gate to source charge Qgs Gate to drain charge Qgd Gate charge total Qg VDD =44V, ID =80A VDD =44V, ID =80A, nC VGS =0 to 10V Gate plateau voltage Reverse Diode Inverse diode continuous TC=25°C forward current Inv. diode direct current, pulsed ISM Inverse diode forward voltage VSD VGS =0V, IF =80A - 0.96 1.3 V Reverse recovery time trr VR =30V, IF =lS , - 55 70 ns Reverse recovery charge Qrr diF /dt=100A/µs - 96 120 nC Page 3 2003-05-09 SPI80N06S2-07 SPP80N06S2-07,SPB80N06S2-07 1 Power dissipation 2 Drain current Ptot = f (TC) ID = f (T C) parameter: VGS≥ 6 V parameter: VGS≥ 10 V SPP80N06S2-07 280 SPP80N06S2-07 90 W A 240 220 70 60 180 ID P tot 200 160 50 140 40 120 100 30 80 20 60 40 10 20 0 0 20 40 60 80 0 100 120 140 160 °C 190 0 20 40 60 80 100 120 140 160 °C 190 TC TC 3 Safe operating area 4 Max. transient thermal impedance ID = f ( VDS ) Z thJC = f (t p) parameter : D = 0 , TC = 25 °C parameter : D = t p/T 10 3 SPP80N06S2-07 10 1 SPP80N06S2-07 K/W A t = 15.0µs p 0 Z thJC V 2 100 µs 10 -1 10 -2 R DS (on ) ID = 10 DS /I D 10 D = 0.50 1 ms 10 0.20 1 10 -3 0.10 0.05 10 0 10 -1 10 0 10 1 V 10 2 10 -4 10 -5 0.02 single pulse 0.01 10 -7 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 tp VDS Page 4 2003-05-09 0 SPI80N06S2-07 SPP80N06S2-07,SPB80N06S2-07 5 Typ. output characteristic 6 Typ. drain-source on resistance ID = f (V DS); T j=25°C RDS(on) = f (I D) parameter: tp = 80 µs parameter: VGS SPP80N06S2-07 190 SPP80N06S2-07 21 Ptot = 250W mΩ A c d e f g h VGS [V] 3.8 b 4.0 c 4.2 d 4.5 e 4.8 f 5.0 g 5.3 f h 10.0 ID 140 g 120 18 a 100 R DS(on) 160 16 14 12 10 80 8 e 60 6 h d 40 4 c 20 VGS [V] = 2 c 4.2 b a 0 0 1 2 3 4 V d 4.5 e f 4.8 5.0 g h 5.3 10.0 0 5.5 0 20 40 60 80 A 100 140 ID VDS 7 Typ. transfer characteristics 8 Typ. forward transconductance ID= f ( V GS ); V DS≥ 2 x ID x RDS(on)max g fs = f(I D); T j=25°C parameter: tp = 80 µs parameter: g fs 160 120 S A 100 90 g fs ID 120 100 80 70 80 60 50 60 40 40 30 20 20 10 0 0 1 2 3 4 0 V 6 VGS Page 5 0 20 40 60 80 100 120 A 150 ID 2003-05-09 SPI80N06S2-07 SPP80N06S2-07,SPB80N06S2-07 9 Drain-source on-state resistance 10 Gate threshold voltage RDS(on) = f (Tj) VGS(th) = f (T j) parameter : ID = 68 A, VGS = 10 V parameter: VGS = VDS SPP80N06S2-07 24 4 mΩ V 18 3 VGS(th) R DS(on) 20 16 14 12 900 µA 2.5 180 µA 2 10 1.5 98% 8 typ 6 1 4 0.5 2 0 -60 -20 20 60 140 °C 100 0 -60 200 -20 20 60 °C 100 180 Tj Tj 11 Typ. capacitances 12 Forward character. of reverse diode C = f (V DS) IF = f (V SD) parameter: VGS=0V, f=1 MHz parameter: T j , tp = 80 µs 10 4 10 3 SPP80N06S2-07 A Ciss 10 2 10 1 C IF pF 10 Coss 3 T j = 25 °C typ Crss T j = 175 °C typ T j = 25 °C (98%) T j = 175 °C (98%) 10 2 0 10 5 10 15 20 V 30 VDS 0 0 0.4 0.8 1.2 1.6 2 2.4 V 3 VSD Page 6 2003-05-09 SPI80N06S2-07 SPP80N06S2-07,SPB80N06S2-07 13 Typ. avalanche energy 14 Typ. gate charge E AS = f (T j) VGS = f (QGate) par.: I D = 80 A, V DD = 25 V, R GS = 25 Ω parameter: ID = 80 A pulsed 550 SPP80N06S2-07 16 mJ V 450 12 VGS E AS 400 350 0,2 VDS max 10 0,8 VDS max 300 8 250 6 200 150 4 100 2 50 0 25 45 65 85 105 125 145 °C 185 Tj 0 0 20 40 60 80 100 nC 130 QGate 15 Drain-source breakdown voltage V(BR)DSS = f (Tj) parameter: ID=10 mA 66 SPP80N06S2-07 V(BR)DSS V 62 60 58 56 54 52 50 -60 -20 20 60 100 140 °C 200 Tj Page 7 2003-05-09 SPI80N06S2-07 SPP80N06S2-07,SPB80N06S2-07 Published by Infineon Technologies AG, Bereichs Kommunikation St.-Martin-Strasse 53, D-81541 München © Infineon Technologies AG 1999 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Reprensatives worldwide (see address list). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Further information Please notice that the part number is BSPP80N06S2-07, BSPB80N06S2-07 and BSPI80N06S2-07, for simplicity the device is referred to by the term SPP80N06S2-07, SPB80N06S2-07 and SPI80N06S2-07 throughout this documentation Page 8 2003-05-09