Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
T 508 N 12 ...18
T vj = - 40°C...Tvj max
N
Elektrische Eigenschften / Electrical properties Höchstzulässige Werte / Maximum rated values Periodische Vorwärts- und Rückwärts-Spitzensperrspannung repetitive peak forward off-state and reverse voltages Vorwärts-Stoßspitzensperrspannung non-repetitive peak foward off-state voltage Rückwärts-Stoßspitzensperrspannung non-repetitive peak reverse voltage Durchlaßstrom-Grenzeffektivwert RMSM on-state current Dauergrenzstrom average on-state current Stoßstrom-Grenzwert surge current Grenzlastintegral I²t-value Kritische Stromsteilheit critical rate of rise of on-state current Kritische Spannungssteilheit critical rate of rise of off-state voltage Charakteristische Werte / Characteristic values Durchlaßspannung on-state voltage Schleusenspannung threshold voltage Ersatzwiderstand slope resistance Durchlaßkennlinie on-state voltage vT = A + B x iT + C x ln (iT + 1) + D x √ iT Zündstrom gate trigger current Zündspannung gate trigger voltage Nicht zündener Steuerstrom gate non-trigger current Nicht zündene Steuerspannung gate non-trigger voltage Haltestrom holding current Einraststrom latching current Vorwärts- und Rückwärts-Sperrstrom forward off-state and reverse currents Zündverzug gate controlled delay time
T vj = Tvj max, iT = 1600 A T C = 85 °C
VDRM , VRRM VDSM VRSM ITRSMSM ITAVM ITSM I²t (diT/dt)cr
1200 1600 1200 1600 1300 1700
1400 1800 1400 1800 1500 1900 800 508 8000 6900
V V V V V V A A A A
1)
T vj = - 40°C...Tvj max
T vj = + 25°C...Tvj max
T vj = 25°C, tp = 10 ms T vj = Tvj max, tp = 10 ms T vj = 25°C, tp = 10ms T vj = Tvj max, tp = 10ms DIN IEC 747-6 f=50 Hz, vL = 10V, iGM = 1 A diG/dt = 1 A/µs T vj = Tvj max, vD = 0,67 VDRM 5.Kennbuchstabe / 5th letter F
320
238 120
3 A²s *10 3 A²s *10
A/µs
(dvD/dt)cr
1000
V/µs
vT VT(TO) rT A= 0,93854 B= 3,384E-04 C=-5,551E-02 D= 2,001E-02 IGT VGT IGD VGD IH
max.
1,92 0,8 0,6
V V mΩ
T vj = Tvj max
T vj = Tvj max
T vj = Tvj max
T vj = 25°C, vD = 6 V
max. max. max. max. max. max. max.
200 2 10 5 0,2 300 1200
mA V mA mA mV mA mA
T vj = 25°C, vD = 6V
T vj = Tvj max, vD = 6 V T vj = Tvj max,vD = 0,5 VDRM T vj = Tvj max,vD = 0,5 VDRM T vj = 25°C, vD = 6 V, RA = 5 Ω
T vj = 25°C, vD = 6 V, RGK>= 10 Ω IL iGM = 1 A, diG/dt = 1 A/µs tg = 20 µs T vj = Tvj max vD = VDRM, vR = VRRM DIN IEC 747-6 T vj = 25°C iGM = 1 A, diG/dt = 1 A/µs
iD, iR tgd
max. max.
50 4
mA µs
1) 1800 V auf Anfrage / 1800 V on demand
SZ-AM / 99-07-26, K.-A.Rüther
A
Seite/page 1
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
T 508 N 12 ...18
T vj = Tvj max, iTM=ITAVM vRM =100V, vDM = 0,67 VDRM dvD/dt = 20 V/µs, -diT/dt = 10 A/µs 4. Kennbuchstabe / 4th letter O
N
Elektrische Eigenschften / Electrical properties
Charakteristische Werte / Characteristic values Freiwerdezeit circuit commutatet turn-off time tq
typ.
250
µs
Thermische Eigenschaften / Thermal properties
Innerer Wärmewiderstand thermal resitance, junction to case
Kühlfläche / cooling surface beidseitig / two-sided, ? =180°sin beidseitig / two-sided, DC Anode / anode, ? =180°sin Anode / anode, DC Kathode / cathode, ? =180°sin Kathode / cathode, DC
RthJC max. max. max. max. max. max. RthCK max. max. T vj max T c op T stg 0,0075 0,0150 125 -40...125 -40...140 °C/W °C/W °C °C °C 0,0530 0,0500 0,0880 0,0850 0,1230 0,1200 °C/W °C/W °C/W °C/W °C/W °C/W
Übergangs- Wärmewiderstand thermal resitance, case to heatsink Höchstzulässige Sperrschichttemperatur max. junction temperature Betriebstemperatur operating temperature Lagertemperatur storage temperature
Kühlfläche / cooling surface beidseitig / two-sided einseitig / single-sided
Mechanische Eigenschaften / Mechanical properties
Gehäuse, siehe Anlage case, see appendix Si-Element mit Druckkontakt Si-pellet with pressure contact Anpreßkraft clamping force Gewicht weight Kriechstrecke creepage distance Feuchteklasse humidity classification Schwingfestigkeit vibration resistance
DIN 40040
Seite 3 page 3
F G typ.
5 ...10 100 17 C 50
kN g mm
f = 50Hz
m/s²
Mit dieser technischen Information werden Halbleiterbauelemente spezifiziert, jedoch keine Eigenschaften zugesichert. Sie gilt in Verbindung mit den zugehörigen Technischen Erläuterungen./ The technical Information specifies semiconductors devices but promises no characteristics. It is valid in combination with the belonging technical notes. SZ-AM / 99-07-26, K.-A.Rüther A Seite/page 2
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
T 508 N 12 ...18
N
SZ-AM / 99-07-26, K.-A.Rüther
A
Zn. Nr.: 1
Seite/page 3
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
T 508 N 12 ...18
N
Kühlung cooling
Analytische Elemente des transienten Wärmewiderstandes ZthJC für DC Analytical ementes of transient thermal impedanceZthJC for DC Pos.n 1
0,010500 0,001130 0,009400 0,000984 0,009280 0,000939
2
0,002830 0,025500 0,009740 0,016700 0,014500 0,028500
3
0,016700 0,051100 0,018200 0,204000 0,008680 0,156000
4
0,018800 0,429000 0,016100 0,821000 0,040100 1,120000
5
0,001160 2,490000 0,031600 5,000000 0,047500 9,100000
6
7
beidseitig two-sided anodenseitig anode-sided kathodenseitig cathode-sided
Rthn [°C/W]
τ n [s]
Rthn [°C/W]
τ n [s]
Rthn [°C/W]
τ n [s]
Analytische Funktion / analytical function : ZthJC =
Σ
n max
Rthn ( 1 - EXP ( - t / τ n ))
n=1
SZ-AM / 99-07-26, K.-A.Rüther
Seite/page 4
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
T 508 N 12 ...18
N
2.000
1.500
iT [A]
1.000
500
0 0,5 1 1,5 vT [V] 2 2,5
Grenzdurchlaßkennlinie / Limiting 0n-state characteristics iT = f(vT) Tvj = Tvj max
SZ-AM / 99-07-26, K.-A.Rüther
Z. Nr.: 2
Seite/page 5
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
T 508 N 12 ...18
N
800 180° 120° 90°
60° 600 Θ = 30°
[W] P 200 0 0 100 200 300 I TAV [A] 400 500 600
TAV
400
Durchlaßverlustleistung / On-state power loss PTAV = f(ITAV) Parameter: Stromflußwinkel Θ / current conduction angle Θ
SZ-AM / 99-07-26, K.-A.Rüther
A
Z.Nr.: 3
Seite/page 6
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor 140
T 508 N 12 ...18
N
120
100
TC [°C]
80
60
40
Θ = 30° 20 0 100 200
60°
90°
120°
180°
300 ITAVM [A]
400
500
600
Höchstzulässige Gehäusetemperatur / Maximum allowable case temperature TC = f(ITAVM) Beidseitige Kühlung / Two-sided cooling Parameter: Stromflußwinkel Θ / current conduction angle Θ
SZ-AM / 99-07-26, K.-A.Rüther A Z.Nr.:4 Seite/page 7
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor 140
T 508 N 12 ...18
N
120
100
TA [°C]
80
60
40
Θ = 30° 20 0 50 100
60° 150 ITAVM [A]
90°
120°
180° 200 250
Höchstzulässige Kühlmitteltemperatur / Max. allowable cooling medium temperature TA = f (ITAVM) Luftselbstkühlung / Natural air-cooling Kühlkörper/Heatsink. K0.36S Parameter: Stromflußwinkel Θ / current conduction angle Θ
SZ-AM / 99-07-26, K.-A.Rüther A Z.Nr.: 5 Seite/page 8
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor 140
T 508 N 12 ...18
N
120
100
TA [°C]
80
60
40
Θ = 30° 20 0 100 200
60°
90° 300
120°
180° 400 500
ITAVM [A]
Höchstzulässige Kühlmitteltemperatur / Max. allowable cooling medium temperature TA = f (ITAVM) Verstärkte Luftkühlung / Forced air-cooling Kühlkörper/Heatsink. K0.05F, VL = 50 l/s Parameter: Stromflußwinkel Θ / current conduction angle Θ
SZ-AM / 99-07-26, K.-A.Rüther
A
Z.Nr.: 6
Seite/page 9
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor 140
T 508 N 12 ...18
N
120
100
TC [°C]
80
60
40
90° Θ = 30° 0 100 200 300 ITAVM [A] 60° 120° 400 180° 500 600
20
Höchstzulässige Gehäusetemperatur / Maximum allowable case temperature TC = f(ITAVM) Anodenseitige Kühlung / anode sided cooling Parameter: Stromflußwinkel Θ / current conduction angle Θ
SZ-AM / 99-07-26, K.-A.Rüther A Z.Nr.: 7 Seite/page 10
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
T 508 N 12 ...18
N
1200
DC 1000
180° 800 90° 60° P TAV [W] 600 Θ = 30° 120°
400
200
0 0 100 200 300 400 ITAV [A] 500 600 700 800
Durchlaßverlustleistung / On-state power loss PTAV = f(ITAV) Parameter: Stromflußwinkel Θ / current conduction angle Θ
SZ-AM / 99-07-26, K.-A.Rüther
A
Z.Nr.: 8
Seite/page 11
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
T 508 N 12 ...18
N
140
120
100
TC [°C]
80
60
40
Θ = 30° 20 0 100 200
60°
90°
120°
180°
DC
300
400 ITAVM [A]
500
600
700
800
Höchstzulässige Gehäusetemperatur / Maximum allowable case temperature TC = f(ITAVM) Beidseitige Kühlung / Two-sided cooling Parameter: Stromflußwinkel Θ / current conduction angle Θ
SZ-AM / 99-07-26, K.-A.Rüther A Z.Nr.: 9 Seite/page 12
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor 140
T 508 N 12 ...18
N
120
100
TA [°C]
80
60
40 120° 180° Θ = 30° 20 0 50 100 150 ITAVM [A] 200 250 300
60°
90°
DC
Höchstzulässige Kühlmitteltemperatur / Max. allowable cooling medium temperature TA = f (ITAVM) Luftselbstkühlung / Natural air-cooling Kühlkörper/Heatsink. K 0.36 S Parameter: Stromflußwinkel Θ / current conduction angle Θ
SZ-AM / 99-07-26, K.-A.Rüther A / 98 Z.Nr.: 10 Seite/page 13
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
T 508 N 12 ...18
N
140
120
100
TA [°C]
80
60
40
Θ = 30° 20 0 100 200
60°
90° 300
120
180° 400
DC 500 600
ITAVM [A]
Höchstzulässige Kühlmitteltemperatur / Max. allowable cooling medium temperature TA = f (ITAVM) Verstärkte Luftkühlung / Forced air-cooling Kühlkörper/Heatsink. K0.05F, VL = 50 l/s Parameter: Stromflußwinkel Θ / current conduction angle Θ
SZ-AM / 99-07-26, K.-A.Rüther
A
Z.Nr.: 11
Seite/page 14
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
T 508 N 12 ...18
N
140
120
100
TC [°C]
80
60
40
Θ = 30° 20 0 100 200
60° 300
90°
120° 400
180° 500 600 700
DC 800
ITAVM [A]
Höchstzulässige Gehäusetemperatur / Maximum allowable case temperature TC = f(ITAVM) Anodenseitige Kühlung / anode sided cooling Parameter: Stromflußwinkel Θ / current conduction angle Θ
SZ-AM / 99-07-26, K.-A.Rüther
A
Z.Nr.: 12
Seite/page 15
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
T 508 N 12 ...18
N
10.000
5.000
I TAV (vor) = 0A 40 A 80 A 120 A 140 A 160 A
I T (OV) [A]
1.000
500
100 0,01
0,1
1
10 t [s]
100
1000
10000
Überstrom / Overload on-state current IT(OV) = f(t) Beidseitige Luftselbstkühlung / Two-sided natural cooling K 0.36 S TA = 45°C Parameter: Vorlaststrom / pre-load current ITAV(vor)
SZ-AM / 99-07-26, K.-A.Rüther
A
Z. Nr.: 13
Seite/page 16
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor 10.000
T 508 N 12 ...18
N
8.000
6.000
4.000
I TAV (vor) = 0A 80 A 160A 240 A 280 A 320 A
I T (OV) [A]
2.000
1.000 0,01
0,1
1 t [s]
10
100
1000
Überstrom / Overload on-state current IT(OV) = f(t) Beidseitige verstärkte Kühlung / forced two-sided cooling K0.12F TA = 35°C, VL = 50 l/s Parameter: Vorlaststrom / pre-load current ITAV(vor)
SZ-AM / 99-07-26, K.-A.Rüther
A
Z. Nr.: 14
Seite/page 17
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
1600
T 508 N 12 ...18
1600 1400
N
20 s
1400 1200 [A], I TAV(vor) = 0 1000 800 600 400 200 0
4s
1s
ITAV(vor) [A]= 160
120
80
40 0
1200
1 min 0,4 s
1000
4 min
SD = 0,1 s
800
TINT
600
I
2h 10 min
40 min
400
SD ED
200
I TAV(vor)
I TINT
0
0,1
1
ED [%]
10
100 0
500
ITINT [A]
1000
1500
Höchstzul. Durchlaßstrom bei Ausetzbetrieb / Max. allowable on-state current
during intermittent operation ITINT = f(ED)
Beidseitig Luftselbstkühlung / two-sided natural cooling K 0.36S TA = 45 °C Parameter: Vorlaststrom / pre-load current ITAV(vor) , Spieldauer / cycle duration SD
1600 20 s 1400 0,4 s 1200 =0
TAV(vor)
1600
4s
1s
1400
ITAV(vor) [A]= 320
240 160 0
80
1 min SD = 0,1 s
1200
1000
1000
I TINT [A], I
4 min
800 10 min 600 2h
400 600 800
SD ED
400
40 min
200
I TAV(vor)
I TINT
200
0,1 1
ED [%]
10
100 200
400
600
800 1000 ITINT [A]
1200
1400
1600
Höchstzul. Durchlaßstrom bei Ausetzbetrieb / Max. allowable on-state current
during intermittent operation ITINT = f(ED)
Beidseitig verstärkte Kühlung / forced two-sided cooling K 0.12F TA = 35 °C, VL = 50 l/s Parameter: Vorlaststrom / pre-load current ITAV(vor) , Spieldauer / cycle duration SD
SZ-AM / 99-07-26, K.-A.Rüther A Z. Nr.: 15 Seite/page 17
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
T 508 N 12 ...18
N
8.000
7.000
6.000
a
5.000
K 0.012 F, TA = 35 °C vL = 50l/s
I T(OV)M [A]
4.000
b
3.000
2.000
K 0.36 S T A = 45 °C
1.000
0 0,01
0,1 t [s]
1
10
Grenzstrom / Max. overload on-state current IT(OV)M = f(t), vRM = 0,8 VRRM Beidseitige Kühlung / Two-sided cooling Kühlkörper / Heatsink: K0.36S, K 0.05F Belastung aus / Surge current occurs: a - Leerlauf / No-load conditions b - Betrieb mit Dauergrenzstrom / During operation at max. average on-state current ITAVM
SZ-AM / 99-07-26, K.-A.Rüther
A
Z. Nr.: 16
Seite/page 19
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
T 508 N 12 ...18
N
Steuercharakteristik vG = f (iG) mit Zündbereichen für VD = 6 V Gate characteristic vG = f (iG) with triggering area for VD = 6 V
Höchstzulässige Spitzensteuerverlustleistung / Maximum rated
peak gate power disspation PGM = f (tg) :
a - 40 W/10ms b - 80 W/1ms c - 100 W/0,5ms d - 150 W/0,1ms
SZ-AM / 99-07-26, K.-A.Rüther
A
Z.Nr.: 17
Seite/page 20
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
1000
T 508 N 12 ...18
N
100
t gd [µs]
10
a
b 1
0,1 10 100 i GM [mA] 1000 10000
Zündverzug / Gate controlled delay time tgd = f(iGM) Tvj = 25°C, diG/dt = iGM/1µs a - maximaler Verlauf / limiting characteristic b - typischer Verlauf / typical characteristic
SZ-AM / 99-07-26, K.-A.Rüther
A
Z.Nr.: 18
Seite/page 21
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
T 508 N 12 ...18
N
10000
iTM = [A] 1000 500 500A 200
100
Qr [µAs]
50
1000
20
100 1 10 -di/dt [A/µs]
Sperrverzögerungsladung / Recovered charge Qr = f(di/dt) Tvj = Tvj max, vR = 0,5 VRRM, v RM = 0,8 VRRM Parameter: Durchlaßstrom / On-state current iTM
100
SZ-AM / 99-07-26, K.-A.Rüther
Zn. Nr.: 19
Seite/page 22
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
T 508 N 12 ...18
N
0,140
Θ
0,120
=
30°
0,100
0,080 Z (th) JC [°C/W]
60°
90° 0,060 120° 180°
0,040
0,020
0,000 0,001
0,01
0,1 t [s]
1
10
Transienter innerer Wärmewiderstand / Transient thermal impedance Z(th)JC = f(t) Beidseitige Kühlung /Ttwo-sided cooling Parameter: Stromflußwinkel Θ / current conduction angle Θ
SZ-AM / 99-07-26, K.-A.Rüther
A
Z.Nr.: 20
Seite/page 23
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
T 508 N 12 ...18
N
0,200
0,180
Θ=
0,160 30° 0,140
0,120 Z (th) JC [°C/W] 60° 0,100
90° 120° 180°
0,080
0,060
0,040
0,020
0,000 0,001
0,01
0,1 t [s]
1
10
100
Transienter innerer Wärmewiderstand / Transient thermal impedance Z(th)JC = f(t) Anodenseitige Kühlung / Anode-sided sided cooling Parameter: Stromflußwinkel Θ / current conduction angle Θ
SZ-AM / 99-07-26, K.-A.Rüther
A
Z.Nr.: 21
Seite/page 24
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
T 508 N 12 ...18
N
0,200
Θ=
0,180 30°
0,160
60° 0,140 90° 0,120 Z (th) JC [°C/W] 120° 180°
0,100
0,080
0,060
0,040
0,020
0,000 0,001
0,01
0,1 t [s]
1
10
100
Transienter innerer Wärmewiderstand / Transient thermal impedance Z(th)JC = f(t) Kathodenseitige Kühlung / Cathde-sided cooling Parameter: Stromflußwinkel Θ / current conduction angle Θ
SZ-AM / 99-07-26, K.-A.Rüther
A
Z.Nr.: 22
Seite/page 25
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor 0,160
T 508 N 12 ...18
N
Θ=
0,140 30°
0,120
0,100
60°
Z (th) JC [°C/W]
90° 0,080 120°
0,060
180°
DC 0,040
0,020
0,000 0,001
0,01
0,1 t [s]
1
10
Transienter innerer Wärmewiderstand / Transient thermal impedance Z(th)JC = f(t) Beidseitige Kühlung /Ttwo-sided cooling Parameter: Stromflußwinkel Θ / current conduction angle Θ
SZ-AM / 99-07-26, K.-A.Rüther
A
Z.Nr.: 23
Seite/page 26
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
T 508 N 12 ...18
N
0,200 Θ= 0,180 30°
0,160
0,140 60°
0,120 Z (th) JC [°C/W]
90° 120°
0,100
180° DC
0,080
0,060
0,040
0,020
0,000 0,001
0,01
0,1 t [s]
1
10
100
Transienter innerer Wärmewiderstand / Transient thermal impedance Z(th)JC = f(t) Anodenseitige Kühlung / Anode-sided cooling Parameter: Stromflußwinkel Θ / current conduction angle Θ
SZ-AM / 99-07-26, K.-A.Rüther
A
Z.Nr.: 24
Seite/page 27
Technische Information / Technical Information
Netz-Thyristor Phase Control Thyristor
T 508 N 12 ...18
N
Θ= 30°
0,220
0,200
0,180 60° 0,160 90° 0,140 120° 180° Z (th) JC [°C/W] 0,120 DC
0,100
0,080
0,060
0,040
0,020
0,000 0,001
0,01
0,1 t [s]
1
10
100
Transienter innerer Wärmewiderstand / Transient thermal impedance Z(th)JC = f(t) Kathodenseitige Kühlung / Cathode-sided cooling Parameter: Stromflußwinkel Θ / current conduction angle Θ
SZ-AM / 99-07-26, K.-A.Rüther
A
Z.Nr.: 25
Seite/page 28
Nutzungsbedingungen
Die in diesem Produktdatenblatt enthaltenen Daten sind ausschließlich für technisch geschultes Fachpersonal bestimmt. Die Beurteilung der Geeignetheit dieses Produktes für die von Ihnen anvisierte Anwendung sowie die Beurteilung der Vollständigkeit der bereitgestellten Produktdaten für diese Anwendung obliegt Ihnen bzw. Ihren technischen Abteilungen. In diesem Produktdatenblatt werden diejenigen Merkmale beschrieben, für die wir eine liefervertragliche Gewährleistung übernehmen. Eine solche Gewährleistung richtet sich ausschließlch nach Maßgabe der im jeweiligen Liefervertrag enthaltenen i Bestimmungen. Garantien jeglicher Art werden für das Produkt und dessen Eigenschaften keinesfalls übernommen. Sollten Sie von uns Produktinformationen benötigen, die über den Inhalt dieses Produktdatenbl tts hinausgehen und insbesondere a eine spezifische Verwendung und den Einsatz dieses Produktes betreffen, setzen Sie sich bitte mit dem für Sie zuständigen Vertriebsbüro in Verbindung (siehe www.eupec.com, Vertrieb&Kontakt). Für Interessenten halten wir Application Notes bereit. Aufgrund der technischen Anforderungen könnte unser Produkt gesundheitsgefährdende Substanzen enthalten. Bei Rückfragen zu den in diesem Produkt jeweils enthaltenen Substanzen setzen Sie sich bitte ebenfalls mit dem für Sie zuständigen Vertriebsbüro in Verbindung. Sollten Sie beabsichtigen, das Produkt in Anwendungen der Luftfahrt, in gesundheits- oder lebensgefährdenden oder lebenserhaltenden Anwendungsbereichen einzusetzen, bitten wir um Mitteilung. Wir weisen darauf hin, dass wir für diese Fälle - die gemeinsame Durchführung eines Risiko- und Qualitätsassessments; - den Abschluss von speziellen Qualitätssicherungsvereinbarungen; - die gemeinsame Einführung von Maßnahmen zu einer laufenden Produktbeobachtung dringend empfehlen und gegebenenfalls die Belieferung von der Umsetzung solcher Maßnahmen abhängig machen. Soweit erforderlich, bitten wir Sie, entsprechende Hinweise an Ihre Kunden zu geben. Inhaltliche Änderungen dieses Produktdatenblatts bleiben vorbehalten.
Terms & Conditions of usage
The data contained in this product data sheet is exclusively intended for technically trained staff. You and your technical dep artments will have to evaluate the suitability of the product for the intended application and the completeness of the product data with respect to such application. This product data sheet is describing the characteristics of this product for which a warranty is granted. Any such warranty isgranted exclusively pursuant the terms and conditions of the supply agreement. There will be no guarantee of any kind for the product a its nd characteristics. Should you require product information in excess of the data given in this product data sheet orwhich concerns the specific application of our product, please contact the sales office, which is responsible for you (see www.eupec.com, sales&contact). For those that are specifically interested we may provide application notes. Due to technical requirements our product may contain dangerous substances. For information onthe types in question please contact the sales office, which is responsible for you. Should you intend to use the Product in aviation applications, in health or live endangering or life support applications, please notify. Please note, that for any such applications we urgently recommend - to perform joint Risk and Quality Assessments; - the conclusion of Quality Agreements; - to establish joint measures of an ongoing product survey, and that we may make delivery depended on the realization of any such measures. If and to the extent necessary, please forward equivalent notices to your customers. Changes of this product data sheet are reserved.