TLE42344GHTMA1

OPTIREG™ linear TLE42344G Low-dro pout linear voltage regulato r Features • Output voltage tolerance ≤ ±2% • Low dropout voltage • Output current up to 100 mA • Very low current consumption • Overtemperature shutdown • Output current limitation • Suitable for use in automotive electronics • Reverse polarity protection • Green Product (RoHS compliant) Potential applications General automotive applications. Product validation Qualified for automotive applications. Product validation according to AEC-Q100. Description The TLE42344G is a 5-V low-dropout fixed-voltage regulator in a PG-SOT223-4 package. The IC regulates an input voltage VI in the range 5.5 V < VI < 45 V to VQrated = 5.0 V. The maximum output current is more than 100 mA. This IC is protected against short circuit and overheating by the integrated output current limitation and the overtemperature shutdown. Type Package Marking TLE42344G PG-SOT223-4 42344 Datasheet www.infineon.com/OPTIREG-linear 1 Rev. 1.1 2023-05-22 OPTIREG™ linear TLE42344G Low-dropout linear voltage regulator Table of contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Potential applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Product validation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1 Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 2.1 2.2 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Pin assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Pin definitions and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 3.1 3.2 3.3 General product characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Functional range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thermal resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Circuit description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 5 5.1 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Electrical characteristics voltage regulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 6 Typical performance characteristics voltage regulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 7 7.1 Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Further application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 8 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Datasheet 2 5 5 6 6 Rev. 1.1 2023-05-22 OPTIREG™ linear TLE42344G Low-dropout linear voltage regulator Block diagram 1 Block diagram Saturation control and protection circuit Temperature sensor Input 1 3 Control amplifier Adjustment Output Buffer Bandgap reference 2, 4 GND AEB01527 Figure 1 Datasheet Block diagram 3 Rev. 1.1 2023-05-22 OPTIREG™ linear TLE42344G Low-dropout linear voltage regulator Pin configuration 2 Pin configuration 2.1 Pin assignment 4 1 2 3 I GND Q AEP01526 Figure 2 Pin configuration 2.2 Pin definitions and functions Table 1 Pin definitions and functions Pin Symbol Function 1 I Input voltage Block to ground directly on the IC with ceramic capacitor 2, 4 GND Ground 3 Q 5-V output voltage Block to ground with capacitor ≥ 10 µF, ESR ≤ 10 Ω Datasheet 4 Rev. 1.1 2023-05-22 OPTIREG™ TLE42344G Low-dropout linear voltage regulator General product characteristics 3 General product characteristics 3.1 Absolute maximum ratings Table 2 Absolute maximum ratings1) Tj = -40°C to +150°C; all voltages with respect to ground, positive current flowing into pin (unless otherwise specified) Parameter Symbol Values Unit Note or Number Test Condition Min. Typ. Max. VI -30 – 45 V – P_4.1.1 VQ -1 – 32 V – P_4.1.2 Junction temperature Tj -40 – 150 °C – P_4.1.3 Storage temperature Tstg -50 – 150 °C – P_4.1.4 VESD -4 – 4 kV 2) HBM P_4.1.5 kV 3) CDM P_4.1.6 Input Input voltage Output Output voltage Temperatures ESD susceptibility ESD resistivity to GND ESD resistivity to GND VESD -1.5 – 1.5 1) Not subject to production test, specified by design. 2) ESD susceptibility, HBM according to EIA/JESD 22-A114B. 3) ESD susceptibility, Charged Device Model “CDM” EIA/JESD22-C101 or ESDA STM5.3.1. Notes 1. Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2. Integrated protection functions are designed to prevent IC destruction under fault conditions described in the datasheet. Fault conditions are considered as “outside” normal operating range. Protection functions are not designed for continuous repetitive operation. Datasheet 5 Rev. 1.1 2023-05-22 OPTIREG™ TLE42344G Low-dropout linear voltage regulator General product characteristics 3.2 Functional range Table 3 Functional range Parameter Symbol Values Min. Typ. Max. Unit Note or Test Condition Number Input voltage VI 5.5 – 45 V – P_4.2.1 Junction temperature Tj -40 – 150 °C – P_4.2.2 Note: Within the functional or operating range, the IC operates as described in the circuit description. The electrical characteristics are specified within the conditions given in the electrical characteristics table. 3.3 Thermal resistance Note: This thermal data was generated in accordance with JEDEC JESD51 standards. For more information, go to www.jedec.org. Table 4 Thermal resistance Parameter Junction to case Symbol RthJC Values Min. Typ. Max. – 17 – Unit Note or Test Condition Number K/W 1) P_4.3.1 Measured to heat slug Junction to ambient RthJA – 54 – K/W 1)2) Junction to ambient RthJA – 139 – K/W 1)3) Footprint only P_4.3.3 K/W 1)3) 300 mm2 heatsink area P_4.3.4 K/W 1)3) 600 mm2 heatsink area P_4.3.5 Junction to ambient Junction to ambient RthJA RthJA – – 73 64 – – P_4.3.2 1) Not subject to production test, specified by design. 2) Specified RthJA value is according to Jedec JESD51-2,-5,-7 at natural convection on FR4 2s2p board. The product (chip and package) was simulated on a 76.2 × 114.3 × 1.5 mm3 board with 2 inner copper layers (2 × 70 µm Cu, 2 × 35 µm Cu). Where applicable, a thermal via array under the exposed pad contacted the first inner copper layer. 3) Specified RthJA value is according to Jedec JESD 51-3 at natural convection on FR4 1s0p board. The product (chip and package) was simulated on a 76.2 × 114.3 × 1.5 mm3 board with 1 copper layer (1 × 70 µm Cu). Datasheet 6 Rev. 1.1 2023-05-22 OPTIREG™ linear TLE42344G Low-dropout linear voltage regulator Circuit description 4 Circuit description The control amplifier compares a reference voltage, which is kept highly precise by resistance adjustment, to a voltage that is proportional to the output voltage and drives the base of the series transistor via a buffer. Saturation control, working as a function of load current, prevents any oversaturation of the power element. Dimensioning information on external components The input capacitor Ci is necessary for compensating line influences. The output capacitor CQ is necessary for the stability of the regulating circuit. Stability is guaranteed at values CQ ≥ 10 µF and an ESR ≤ 10 Ω within the operating temperature range. Datasheet 7 Rev. 1.1 2023-05-22 OPTIREG™ linear TLE42344G Low-dropout linear voltage regulator Electrical characteristics 5 Electrical characteristics 5.1 Electrical characteristics voltage regulator Table 5 Electrical characteristics Tj = -40°C to +150°C; VI = 13.5 V; all voltages with respect to ground, positive current flowing into pin (unless otherwise specified) Parameter Symbol Values Min. Typ. Max. Unit Note or Test Condition Number Output voltage VQ 4.9 5.0 5.1 V 5 mA ≤ IQ ≤ 100 mA 6 V ≤ VI ≤ 28 V P_5.1.1 Output current limitation IQ 120 160 – mA – P_5.1.2 Current consumption Iq = II - IQ Iq – – 400 µA IQ = 1 mA P_5.1.3 Current consumption Iq = II - IQ Iq – 9 15 mA IQ = 100 mA P_5.1.4 Drop voltage Vdr – 0.25 0.5 V 1) IQ = 100 mA P_5.1.5 Load regulation ∆VQ – – 40 mV IQ = 5 to 100 mA VI = 6 V P_5.1.6 Line regulation ∆VQ – 15 30 mV VI = 6 to 28 V IQ = 5 mA P_5.1.7 Power supply ripple rejection PSRR – 54 – dB fr = 100 Hz Vr = 0.5 Vpp P_5.1.8 1) Drop voltage = VI - VQ (measured where VQ has dropped 100 mV from the nominal value obtained at VI = 13.5 V). Datasheet 8 Rev. 1.1 2023-05-22 OPTIREG™ linear TLE42344G Low-dropout linear voltage regulator Typical performance characteristics voltage regulator 6 Typical performance characteristics voltage regulator Dropout voltage VDR versus output current IQ VDR Current consumption Iq versus input voltage VI AED01978 800 mV 700 AED01979 15 I q mA 600 10 500 R L = 50 Ω T j = 125 C 400 300 5 200 R L = 100 Ω T j = 25 C 100 0 25 75 50 100 125 0 175 mA 10 0 20 30 IQ VI Current consumption Iq versus output current IQ Current consumption Iq versus output current IQ AED01980 12 40 V 50 AED01981 3.0 Iq mA I q mA 10 2.5 8 2.0 V i = 13.5 V 6 1.5 4 1.0 V i = 13.5 V 2 0 0.5 0 50 100 mA 0 150 IQ Datasheet 9 0 5 10 15 20 30 mA IQ Rev. 1.1 2023-05-22 OPTIREG™ linear TLE42344G Low-dropout linear voltage regulator Typical performance characteristics voltage regulator Output voltage VQ versus temperature Tj Output current IQ versus input voltage VI AED01982 5.20 VQ AED01983 200 I Q mA V 5.10 V i = 13.5 V 150 5.00 T j = 25 C 100 4.90 T j = 125 C 4.80 50 4.70 4.60 -40 0 40 80 0 120 C 160 Tj 0 10 20 30 40 V 50 VI Output voltage VQ versus input voltage VI AED01984 6 VQ V R L = 50 Ω 5 4 3 2 1 0 0 2 4 6 8 V 10 VI Datasheet 10 Rev. 1.1 2023-05-22 OPTIREG™ linear TLE42344G Low-dropout linear voltage regulator Application information 7 Application information Note: The following information is given as a hint for the implementation of the device only and shall not be regarded as a description or warranty of a certain functionality, condition or quality of the device. 1 Input 5.5 V to 45 V Ci 3 TLE42344G Output 10 μF 2, 4 TLE42344G Figure 3 Application diagram Note: This is a very simplified example of an application circuit. The function must be verified in the real application. 7.1 Further application information For further information you may contact https://www.infineon.com/ Datasheet 11 Rev. 1.1 2023-05-22 OPTIREG™ linear TLE42344G Low-dropout linear voltage regulator Package information Package information  “  “ PD[   DFFWR ',1    PLQ %  “  “  “ $ ÛPD[ 8   “   “   Figure 4 0  $ 0 % PG-SOT223-4 (plastic small-outline transistor)1) Green Product (RoHS compliant) To meet the world-wide customer requirements for environmentally friendly products and to be compliant with government regulations the device is available as a Green Product. Green Products are RoHS compliant (Pb-free finish on leads and suitable for Pb-free soldering according to IPC/JEDEC J-STD-020). Further information on packages https://www.infineon.com/packages 1) Dimensions in mm Datasheet 12 Rev. 1.1 2023-05-22 OPTIREG™ linear TLE42344G Low-dropout linear voltage regulator Revision history 9 Revision history Revision Date Changes Rev. 1.1 2023-05-22 Editorial changes Rev. 1.0 2010-02-08 Initial datasheet Datasheet 13 Rev. 1.1 2023-05-22 Trademarks All referenced product or service names and trademarks are the property of their respective owners. Edition 2023-05-22 Published by Infineon Technologies AG 81726 Munich, Germany © 2023 Infineon Technologies AG. All Rights Reserved. Do you have a question about any aspect of this document? Email: erratum@infineon.com Document reference Z8F55246830 IMPORTANT NOTICE The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics ("Beschaffenheitsgarantie"). With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer's compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer's products and any use of the product of Infineon Technologies in customer's applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer's technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). WARNINGS Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.