TLE4266GHTMA1

OPTIREG™ Linear TLE4266G 5 V /10 V low drop voltage regulator Features • Output voltage 5 V or 10 V • Output voltage tolerance ≤ ±2% • 120 mA current capability • Very low current consumption • Low-drop voltage • Overtemperature protection • Reverse polarity proof • Wide temperature range • Suitable for use in automotive electronics • Inhibit • Green Product (RoHS compliant) Potential applications General automotive applications. Product validation Qualified for automotive applications. Product validation according to AEC-Q100/101. Description The OPTIREG™ Linear TLE4266G is a low-drop voltage regulator for 5 V or 10 V supply in a PG-SOT223-4 SMD package. The IC regulates an input voltage VI in the range of 5.5 V/10.5 V < VI < 45 V to VQ,nom = 5 V/10 V. The maximum output current is more than 120 mA. The IC can be switched off via the inhibit input, which causes the current consumption to drop below 10 µA. The IC is shortcircuit-proof and incorporates a temperature protection which turns off the IC at overtemperature. Choosing external components The input capacitor CI is necessary for compensating line influences. Using a resistor of approx. 1 Ω in series with CI, the oscillating of input line inductivity and input capacitance can be clamped. The output capacitor CQ is necessary for the stability of the regulating circuit. Stability is guaranteed at values CQ ≥ 10 µF and an ESR ≤ 10 Ω within the whole operating temperature range. Datasheet www.infineon.com/OPTIREG-Linear 1 Rev. 2.61 2019-06-03 OPTIREG™ Linear TLE4266G 5 V/10 V low drop voltage regulator Type Package Marking TLE4266G PG-SOT223-4 4266 G TLE4266GSV10 PG-SOT223-4 66GV10 Datasheet 2 Rev. 2.61 2019-06-03 OPTIREG™ Linear TLE4266G 5 V/10 V low drop voltage regulator Table of contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Potential applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Product validation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2 2.1 2.2 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Pin assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Pin definitions and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 3.1 General product characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 4.1 4.2 4.3 Functional description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Circuit description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Typical performance characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Datasheet 3 Rev. 2.61 2019-06-03 OPTIREG™ Linear TLE4266G 5 V/10 V low drop voltage regulator Block diagram 1 Block diagram Saturation Control and Protection Circuit Temperature Sensor Ι 1 3 Control Amplifier Adjustment Q Buffer Bandgap Reference 2 INH 4 GND AEB01725 Figure 1 Datasheet Block diagram 4 Rev. 2.61 2019-06-03 OPTIREG™ Linear TLE4266G 5 V/10 V low drop voltage regulator Pin configuration 2 Pin configuration 2.1 Pin assignment GND 4 1 2 Ι INH 3 Q AEP01734 Figure 2 Pin configuration (top view) 2.2 Pin definitions and functions Table 1 Pin definitions and functions Pin Symbol Function 1 I Input voltage Block to ground directly at the IC with a ceramic capacitor. 2 INH Inhibit input Low-active input. 3 Q Output voltage Block to ground with a capacitor CQ ≥ 10 µF. 4 GND Ground Datasheet 5 Rev. 2.61 2019-06-03 OPTIREG™ Linear TLE4266G 5 V/10 V low drop voltage regulator General product characteristics 3 General product characteristics 3.1 Absolute maximum ratings Table 2 Absolute maximum ratings (TLE4266G, TLE4266GSV10) -40°C ≤ Tj ≤ 150°C Parameter Symbol Values Min. Typ. Max. Unit Note or Test Condition Input I Voltage VI -42 – 45 V – Current II – – – – Internally limited VINH -42 – 45 V – Voltage VQ -1 – 32 V – Current IQ – – – – Internally limited IGND 50 – – mA – Junction temperature Tj – – 150 °C – Storage temperature TS -50 – 150 °C – Input voltage VI 5.5 – 45 V – Junction temperature Tj -40 – 150 °C – Inhibit INH Voltage Output Q GND Current Temperature Operating range (TLE4266G) Operating range (TLE4266GSV10) Input voltage VI 10.5 – 45 V – Junction temperature Tj -40 – 150 °C – Junction ambient Rthj-a – – 165 K/W 1) Junction case Rthj-pin – – 17 K/W Measured to pin 4 Thermal resistance 1) Package mounted on PCB 80 × 80 × 1.5 mm3; 35 µm Cu; 5 µm Sn; Footprint only; zero airflow. Datasheet 6 Rev. 2.61 2019-06-03 OPTIREG™ Linear TLE4266G 5 V/10 V low drop voltage regulator Functional description 4 Functional description The device includes a precise reference voltage, which is very accurate due to resistor adjustment. A control amplifier compares the divided output voltage to this reference voltage and drives the base of the PNP series transistor through a buffer. Saturation control as a function of the load current prevents any oversaturation of the power element. The IC also incorporates a number of protection circuitry for: • Overload • Overtemperature • Reverse polarity 4.1 Electrical characteristics Table 3 Electrical characteristics (TLE4266G) VI = 13.5 V; -40°C ≤ Tj ≤ 125°C (unless otherwise specified) Parameter Symbol Values Min. Typ. Max. Unit Note or Test Condition Output voltage VQ 4.9 5 5.1 V 5 mA ≤ IQ ≤ 100 mA; 6 V ≤ Vi ≤ 28 V Output-current limitation IQ 120 150 – mA – Current consumption Iq = Ii - IQ Iq – – 10 µA VINH = 0 V; Tj ≤ 100°C Current consumption Iq = Ii - IQ Iq – – 400 µA IQ = 1 mA Inhibit ON Current consumption Iq = Ii - IQ Iq – 10 15 mA IQ = 100 mA Inhibit ON Drop voltage VDr – 0.25 0.5 V IQ = 100 mA1) Load regulation ∆VQ,lo – – 40 mV IQ = 5 to 100 mA; Vi = 6 V Line regulation ∆VQ,li – 15 30 mV VI = 6 V to 28 V; IQ = 5 mA Power supply ripple rejection PSRR – 54 – dB ƒr = 100 Hz; Vr = 0.5 Vpp Inhibit on voltage VINH, on 3.5 – – V – Inhibit off voltage VINH, off – – 0.8 V – Inhibit current IINH 5 15 25 µA VINH = 5 V Inhibit 1) Drop voltage VDr = Vi - VQ (measured when the output voltage VQ has dropped 100 mV from the nominal value obtained at Vi = 13.5 V). Datasheet 7 Rev. 2.61 2019-06-03 OPTIREG™ Linear TLE4266G 5 V/10 V low drop voltage regulator Functional description Table 4 Electrical characteristics (TLE4266GSV10) VI = 13.5 V; -40°C ≤ Tj ≤ 125°C Parameter Symbol Values Min. Typ. Max. Unit Note or Test Condition Output voltage VQ 9.8 10 10.2 V 5 mA ≤ IQ ≤ 100 mA; 11 V ≤ VI ≤ 21 V Output voltage VQ 9.8 10 10.2 V 1 mA ≤ IQ ≤ 50 mA; 11 V ≤ VI ≤ 28 V Output-current limitation IQ 120 150 200 mA – Current consumption Iq = II - IQ Iq,off – – 10 µA VINH = 0 V; Tj ≤ 100°C Current consumption Iq = II - IQ Iq – 350 500 µA IQ < 1 mA Inhibit ON Current consumption Iq = II - IQ Iq – 7 15 mA IQ < 100 mA Inhibit ON Drop voltage VDr – 0.28 0.5 V IQ = 100 mA1) Load regulation ∆VQ,Lo -80 – 80 mV IQ = 5 to 100 mA; VI = 11 V Line regulation ∆VQ,Li -30 5 30 mV VI = 11 V to 28 V; IQ = 5 mA Power supply ripple rejection PSRR – 54 – dB ƒr = 100 Hz; Vr = 0.5 Vpp Inhibit on voltage VINH, on 3.5 – – V – Inhibit off voltage VINH, off – – 0.8 V – Inhibit current IINH 5 12 25 µA VINH = 5 V Inhibit 1) Drop voltage = VI - VQ measured when the output voltage VQ has dropped 100 mV from the nominal value. Datasheet 8 Rev. 2.61 2019-06-03 OPTIREG™ Linear TLE4266G 5 V/10 V low drop voltage regulator Functional description 4.2 Circuit description Input 5.5 V/10.5 V to 45 V Ι ΙΙ 470 µF Output Q ΙQ 22 µF 100 nF TLE 4266G VΙ VINH INH Ιe VQ GND AES01726 Figure 3 Measuring circuit (TLE4266G, TLE4266GSV10) Input 5.5 V/10.5 V to 45 V Ι CΙ e.g. Kl. 15 Q TLE 4266G INH Output CQ 22 µF GND AES01727 Figure 4 Datasheet Application circuit (TLE4266G, TLE4266GSV10) 9 Rev. 2.61 2019-06-03 OPTIREG™ Linear TLE4266G 5 V/10 V low drop voltage regulator Functional description 4.3 Typical performance characteristics Drop voltage VDr versus output current IQ (5 V, 10 V) Current consumption Iq versus output current IQ (5 V) AED01978 800 V DR mV 700 AED01980 12 Ι q mA 10 600 8 500 Vi = 13.5 V Tj = 125 C 6 400 300 4 200 Tj = 25 C 2 100 0 25 50 75 100 125 mA 0 175 0 50 100 Current consumption Iq versus output current IQ (5 V version) AED01981 AED01981 3.0 Ι q mA Ι q mA 2.5 2.5 2.0 2.0 1.5 1.5 1.0 1.0 Vi = 13.5 V Vi = 13.5 V 0.5 Datasheet 150 Current consumption Iq versus output current IQ (10 V version) 3.0 0 mA ΙQ ΙQ 0.5 0 5 10 15 20 0 30 mA ΙQ 10 0 5 10 15 20 30 mA ΙQ Rev. 2.61 2019-06-03 OPTIREG™ Linear TLE4266G 5 V/10 V low drop voltage regulator Functional description Current consumption Iq versus input voltage VI (5 V version) Current consumption Iq versus input voltage VI (10 V version) AED03013 15 AED02733 15 Ι q mA Ι q mA R L = 50 Ω 10 10 R L = 100 Ω 5 5 R L = 200 Ω R L = 100 Ω 0 0 10 20 30 0 40 V 50 0 10 20 30 VΙ VΙ Output voltage VQ versus temperature Tj (5 V version) Output voltage VQ versus temperature Tj (10 V version) AED03014 5.20 VQ AED02735 10.40 V VQ 5.10 V 10.20 Vi = 13.5 V Datasheet Vi = 13.5 V 5.00 10.00 4.90 9.80 4.80 9.60 4.70 9.40 4.60 -40 40 V 50 0 40 80 9.20 -40 120 C 160 Tj 11 0 40 80 120 C 160 Tj Rev. 2.61 2019-06-03 OPTIREG™ Linear TLE4266G 5 V/10 V low drop voltage regulator Functional description Output voltage VQ versus input voltage VI (5 V version) Output voltage VQ versus input voltage VI (10 V version) AED01984 6 VQ VQ R L = 50 Ω V 5 10 4 8 3 6 2 4 1 2 0 0 0 2 8 6 4 AED02736 12 V V 10 R L = 50 Ω 0 8 4 16 V 20 12 VΙ VΙ Output voltage VQ versus inhibit voltage VINH (5 V version) Output voltage VQ versus inhibit voltage VINH (10 V version) AED02014 6 VQ AED02734 12 VQ V V 10 5 V Ι = 13.5 V V Ι = 13.5 V 8 4 V Ι = VINH V Ι = VINH 3 6 2 4 1 2 0 0 1 2 3 4 0 5 V 6 2 4 6 8 10 V 12 VINH VINH Datasheet 0 12 Rev. 2.61 2019-06-03 OPTIREG™ Linear TLE4266G 5 V/10 V low drop voltage regulator Functional description Output current IQ versus input voltage VI (5 V version) Output current IQ versus input voltage VI (10 V version) AED03015 200 AED02751 200 Ι Q mA Ι Q mA 150 150 Tj = 25 C Tj = 25 C 100 100 Tj = 125 C Tj = 125 C 50 50 0 0 10 20 30 0 40 V 50 10 20 30 40 V 50 VΙ VΙ Datasheet 0 13 Rev. 2.61 2019-06-03 OPTIREG™ Linear TLE4266G 5 V/10 V low drop voltage regulator Package information Package information 1.6 ±0.1 6.5 ±0.2 0.1 max 4 +0.2 acc. to DIN 6784 1 2 0.5 min B 7 ±0.3 3 ±0.1 3.5 ±0.2 A 15˚max 5 3 0.28 ±0.04 2.3 0.7 ±0.1 4.6 0.25 Figure 5 M 0.25 A M B PG-SOT223-4 (plastic small outline transistor)1) Green Product (RoHS compliant) To meet the world-wide customer requirements for environmentally friendly products and to be compliant with government regulations the device is available as a green product. Green products are RoHS-Compliant (i.e Pb-free finish on leads and suitable for Pb-free soldering according to IPC/JEDEC J-STD-020). Further information on packages https://www.infineon.com/packages 1) Dimensions in mm Datasheet 14 Rev. 2.61 2019-06-03 OPTIREG™ Linear TLE4266G 5 V/10 V low drop voltage regulator Revision history 6 Revision history Revision Date Changes 2.61 2019-06-03 Editorial change, added marking 2.6 2019-02-15 Updated layout and structure. Editorial changes. 2.5 2008-03-10 Simplified package name to PG-SOT223-4. No modification of released product. 2.4 2007-03-20 Initial version of RoHS-compliant derivate of TLE4266. AEC certified statement added. RoHS compliance statement and Green product feature added. Package changed to RoHS compliant version. Legal Disclaimer updated. Datasheet 15 Rev. 2.61 2019-06-03 Trademarks All referenced product or service names and trademarks are the property of their respective owners. Edition 2019-06-03 Published by Infineon Technologies AG 81726 Munich, Germany © 2019 Infineon Technologies AG. All Rights Reserved. Do you have a question about any aspect of this document? Email: erratum@infineon.com Document reference Z8F55276374 IMPORTANT NOTICE The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics ("Beschaffenheitsgarantie"). With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer's compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer's products and any use of the product of Infineon Technologies in customer's applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer's technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). WARNINGS Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.