16.000XO95025UMPA

SURFACE-MOUNT OSCILLATORS XO95 SERIES 6.5mm x 5.0mm High-Specification Oscillator DESCRIPTION Euroquartz XO95 series oscillators consist of a TTL/CMOS compatible hybrid circuit and a miniature quartz crystal packaged in a low-profile ceramic package. Full military testing is available making this an ideal crystal for defence and aerospace applications requiring a highly reliable source of clock signals. OUTLINES AND DIMENSIONS FEATURES · · · · · · · · · Suitable for Vapour-Phase, Infrared or Epoxy mount techniques TTL or CMOS compatible Low power consumption Optional Tristate or Standby functions Low EMI emission Supply Voltage 3.3 Volts or 5.0 Volts High shock resistance Full military testing available Hermetically sealed ceramic package PAD CONNECTIONS 1: 2: 3: 4: Output Enable INH (Tristate) or NC Ground Output Vdd POWER DOWN vs. TRISTATE Output Condition Power Down LOW Tristate HIGH SPECIFICATION Frequency Range: Supply Voltage: Calibration Tolerance* A: B: C: Frequency stability** Temp. Range 0° ~ +50°C: -10°~+70°C: -40°~+85°C: -55°~+125°C: Supply Current Frequency 50MHz 40MHz 30MHz 24MHz Output Load CMOS: TTL: Start-up Time: Rise/Fall Time: Ageing: Shock, survival***: Vibration, survival: Operating Temperature: 1.25MHz to 120MHz +3.3 Volts or +5.0 Volts ±0.01% (±100ppm) ±0.1% ±1.0% Stability from ±5ppm to ±30ppm from ±10ppm to ±50ppm from ±20ppm to ±100ppm from ±30ppm to ±100ppm 3.3 Volts 10mA 8mA 6mA 4mA 5.0 Volts 14mA 12mA 10mA 8mA Current consumption when Pad 1 is LOW Output recovery delay when Pad 1 changes from LOW(0) to HIGH(1) DELAYED IMMEDIATE Power Down: When Pad 1 is LOW (0) the oscillator stops oscillation. Tristate; When Pad 1 is LOW the oscillator continues to run but the output buffer amplifier stops functioning; output is high impedance (Z). PACKAGING 1: 2: Tray pack (Standard) 16mm tape, 175mm or 325mm reels (optional) (As per EIA 481) Frequency XO95 - series designation 030 ±30ppm 050 ±50ppm 100 ±100ppm UCMOS/TTL o/p MMilitary Temp. * Tighter tolerance available IIndustrial Temp. ** Does not include calibration tolerance CCommercial Temp. *** High shock version available Tristate Note: All parameters are measured at ambient temperature withW 10MT a PPower Down and 10pF load at 5.0 Volts. Blank - 5.0 Volts A3.3 Volts MILITARY TESTING Cal.A - Calibration A Testing to Mil. specifications is available. To detail testing required Cal.B - Calibration B see separate Mil. Testing specification or contact Euroquartz Cal.C - Calibration C Technical Sales. Cal.x - Special cal. in ppm (Where ‘x’ is the agreed calibration tol.) 15pF (