0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
25HPA5762-D-250.000

25HPA5762-D-250.000

  • 厂商:

    EUROQUARTZ

  • 封装:

  • 描述:

    25HPA5762-D-250.000 - 7x5mm SMD 6 pad - EUROQUARTZ limited

  • 详情介绍
  • 数据手册
  • 价格&库存
25HPA5762-D-250.000 数据手册
EURO QUARTZ DESCRIPTION HPA576 series LVPECL output oscillators cover the frequency range 60MHz to 320MHz. The part utilizes a crystal operating in third overtone mode (Non-PLL) SPECIFICATION Frequency Range: Output Logic Phase Noise: Frequency Stability: Operating Temp Range Commercial: Industrial: Input Voltage: Output Voltage High '1': Low '0': Rise/Fall Times: Current Consumption: Load: Start-up Time: Duty Cycle: Input Static Discharge Prot: Storage Temperature Range: Ageing: Enable/Disable No connection: Disable: HPA576 LVPECL OSCILLATORS 7x5mm SMD 6 pad 60.0MHz to 320.0MHz LVPECL See table See table -10° to +70°C -40° to +85°C +2.5VDC or +3.3VDC ±5% Vdd -1.025V min. Vdd -1.620V max. (RL = 50W to Vdd -2.0V) 0.25ns typical (20% Vdd to 80% Vdd) 75mA max. at 212.50MHz 50W into Vdd-2.0V 5ms typ., 10ms max. 50%±5% (at Vdd -1.3V) 2kV min. -55°C to +150°C ±3ppm per year max., ±2ppm thereafter. At T amb +25°C OUTLINE & DIMENSIONS Both outputs enabled Both outputs are disabled when control pad is taken below 0.3V referenced to ground. Oscillator is always 'on'. (Special request oscillator is off when disabled.) Enable: Both Outputs are enabled when control pad is taken above 0.7 Vcc referenced to ground. ABSOLUTE MAXIMUM RATINGS (Permanent damage may be caused if operated beyond these limits.) Supply Voltage Vdd: +4.6V max. Input Voltage Vi: Vss -0.5 min., VDD +0.5V max. Input Voltage Vo: Vss -0.5 min., Vdd +0.5V max. PHASE NOISE (155.250MHz) Offset 10Hz 100Hz 1kHz 10kHz 100kHz 1MHz 10MHz dBc/Hz -65 -95 -120 -128 -122 -120 -140 STABILITY OVER TEMPERATURE RANGE Stability ±ppm 25 50 100 25 50 100 Temperature Range Order Code °C -10 to +70 -10 to +70 -10 to +70 -40 to +85 -40 to +85 -40 to +85 A B C D E F PART NUMBERS HPA576 oscillator part numbers are derived as follows: Example: Supply Voltage 3 = 3.3VDC 25 = 2.5VDC Series Designation Package Style 5761 or 5762 Stability Code (See table) Frequency 3HPA5762-A-250.000 JITTER Integrated Phase Jitter: 0.25ps typical at 155.520MHz (12kHz to 20MHz) Period Jitter (RMS): 3.0ps typical at 155.520MHz Period Jitter (peak to peak): 21ps typical at 155.520MHz EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: info@euroquartz.co.uk www.euroquartz.co.uk
25HPA5762-D-250.000
物料型号 - 型号:HPA576系列

器件简介 - HPA576系列LVPECL输出晶振覆盖60MHz至320MHz的频率范围。该器件使用在第三泛音模式下工作的晶体(非PLL)。

引脚分配 - HP_5761: 1(Enable/Disable),2(未连接),3(地),4(输出),5(互补输出),6(Vcc) - HP_5762: 1(Enable/Disable),2(地),3(输出),4(互补输出),5(Vcc)

参数特性 - 频率范围:60.0MHz至320.0MHz - 输出逻辑:LVPECL - 相位噪声:详见表格 - 频率稳定性:详见表格 - 工作温度范围:商业级 -10°C至+70°C,工业级 -40°C至+85°C - 输入电压:+2.5VDC或+3.3VDC±5% - 输出电压:高'1'至少Vdd-1.025V,低'0'至多Vdd-1.620V(RL=50至Vdd-2.0V) - 上升/下降时间:典型0.25ns(20% Vdd至80% Vdd) - 电流消耗:在212.50MHz时最大75mA - 负载:50欧姆至Vdd-2.0V - 启动时间:典型5ms,最大10ms - 占空比:50%±5%(在Vdd-1.3V时) - 输入静电放电保护:至少2kV - 存储温度范围:-55°C至+150°C - 老化:每年最多±3ppm,之后每年最多±2ppm,在环境温度+25°C时

功能详解 - 使能/禁用功能:无连接时两个输出均启用;禁用时,控制引脚低于0.3V时两个输出均禁用;使能时,控制引脚高于0.7Vcc时两个输出均启用。

应用信息 - 适用于需要精确时钟源的高速通信和数据传输应用。

封装信息 - 封装类型:7x5mm表面贴装6引脚
25HPA5762-D-250.000 价格&库存

很抱歉,暂时无法提供与“25HPA5762-D-250.000”相匹配的价格&库存,您可以联系我们找货

免费人工找货