CX-1VS-SM232.768C

CX MINIATURE CRYSTALS 10kHz to 600kHz MINIATURE SMD CRYSTAL FOR PIERCE OSCILLATORS EURO QUARTZ Telephone: +44(0)1460 230000 Fax: +44(0)1460 230001 Email: sales@euroquartz.co.uk Web: www.euroquartz.co.uk CX-1V-SM CX-1V-SM Page 1 of 2 General Description The miniature CX-1V-SM quartz crystal is a high quality tuningfork resonator for use in Pierce (single inverter) oscillators. The CX1V-SM is hermetically sealed in a rugged, leadless ceramic package. The crystal has been designed for surface-mounting on printed circuit boards or hybrid circuits. The CX-1-SM crystal is manufactured using a photo-lithographic process, yielding consistently high quality production parts.        Miniature tuning-fork design High shock resistance Designed for low-power applications Compatible with hybrid or PC board packaging Low ageing Full military environmental testing available Ideal for battery operated applications Specification Frequency Range: Calibration Tolerance*: Motional Resistance (R): Motional Capacitance (C): Quality Factor (Q): 10kHz to 600kHz A, B or C (see table) Figure 1 Max.: 10 ~ 169.9kHz, 2x typ. 170~600kHz, 2.5x typ. Figure 2 Figure 3 Min. is 0.25x typ. 2.0pF max. 10~24.98kHz 1.5µW max. 25~600kHz 1.0µW max. Figure 4 -0.035ppm/°C ±5ppm max. 1000g 1ms, ½ sine 20g rms, 10-2,000Hz random -10°~+70°C (commercial) -40°~+85°C (industrial) -55°~+125°C (military) -55°C~+125°C 260°C for 20 seconds D (TOP) A E D B C E Outline CX-1-SM Package Dimensions Dimension Typical (mm) Maximum (mm) Shunt Capacitance (C): Drive Level: Turning Point (T)**: Temperature Coefficient: Ageing, first year: Shock, survival***: Vibration, survival***: Operating Temperature: Storage Temperature: Process Temperature: A B C D E Dimension “C” 8.00 3.56 1.14 1.52 Glass Lid (mm max.) 8.38 3.94 see below 1.40 1.78 Ceramic Lid (mm max.) Specifications are typical at 25°C unless otherwise indicated. * ** *** Tighter frequency calibration available Other turning point available Higher shock and vibration version available SM1 SM2 SM3 1.65 1.70 1.78 1.78 1.83 1.90 CX-1V-SM Crystal Calibration Tolerance at 25°C Calibration Frequency Range (kHz) 10~74.9 75~169.9 170~249.9 250~600 A Equivalent Circuit L1 R1 ±0.003% ±0.01% ±0.1% ±0.005% ±0.01% ±0.1% ±0.01% ±0.02% ±0.2% ±0.02% ±0.05% ±0.5% B C 1 C1 C0 2 Solder Pad Layout 1.78 4.06 6.86 L 1 Motional Inductance C 1 Motional Capacitance C0 Shunt Capacitance R 1 Motional Resistance CX MINIATURE CRYSTALS 10kHz to 600kHz MINIATURE SMD CRYSTAL FOR PIERCE OSCILLATORS EURO QUARTZ Telephone: +44(0)1460 230000 Fax: +44(0)1460 230001 Email: sales@euroquartz.co.uk Web: www.euroquartz.co.uk CX-1V-SM Page 2 of 2 Figure 2 - CX-1V Typical Motional Capacitance (C) 5 Circuit Design Conventional HCMOS Pierce Oscillator Circuit Rf Amplifier C1 (fF) 2 1.0 0.5 Buffer Osc. Freq. (Fo) 10 50 100 200 600 Frequency (kHz) CS RA Figure 3 - CX-1V Typical Quality Factor (Q) 300 200 C1 CX-1 C2 100 in '000s 50 Figure 1 - CX-1V Typical Motional Resistance (R) 300 200 100 50 R1 (k 20 10 50 100 200 600 Frequency (kH z) 9) 20 10 5 Figure 4 - CX-1V Typical Turning Point Temp. (°C) +80 +70 +60 10 50 100 200 600 +50 +40 To(°C) +30 +20 + 10 0 - 10 -20 18 50 100 200 600 2 Frequency (kHz) Frequency (kHz) Terminations Packaging CX-1V-SM - Bulk Pack (Standard) - 16mm tape, 178mm or 330mm reels (Optional) per EIA 481 - Tray Pack (Optional) Designation Termination SM1 SM2 SM3 Gold Plated Nickel, Solder Plated Nickel, Solder Plated and Solder Dipped Order Code CX-1V C = Ceramic Lid Blank = Glass Lid Frequency -SM1 32.768kHz SM1 SM2 SM3 (A / I ) “S” if special or custom design Blank if standard Calibration Tolerance* @ 25°C A, B, C *For other calibration tolerances enter figure in ppm Temperature Range: C = Commercial I = Industrial M = Military S = Specify