CX-6OTC-SM132B

CX MINIATURE CRYSTALS 9.6MHz to 160MHz ULTRA-LOW PROFILE MINIATURE SMD CRYSTAL EURO QUARTZ Telephone: +44(0)1460 230000 Fax: +44(0)1460 230001 Email: sales@euroquartz.co.uk Web: www.euroquartz.co.uk CX-6-SM CX-6-SM Page 1 of 2 General Description The CX-6-SM AT-cut quartz crystals are leadless devices designed for surface mounting on printed circuit boards or hybrid substrates. The crystals are intended for use in Pierce oscillators. Hermetically sealed in a miniature ceramic package, the crystals are produced utilizing a photo-lithographic process ensuring consistent high quality production units.         Ultra-low profile (1mm) Ideal for use with microprocessors Designed for low power applications Compatible with hybrid or PCB packaging High shock and vibration resistance Low ageing Full military environmental testing available Custom designs available Specification Frequency Range: Motional Resistance (R): Motional Capacitance (C): Quality Factor (Q): Shunt Capacitance (C): D (TO P) A D Calibration Tolerance*: Outline B C Load Capacitance: Drive Level: Temperature Stability**: CX-6-SM Package Dimensions Dimension Typical (mm) Maximum (mm) Ageing, first year: Shock, survival***: Vibration, survival: Operating Temperature: A B C D Dimension “C” 6.73 2.62 1.27 Glass Lid (mm max.) 7.11 2.90 see below 1.52 Ceramic Lid (mm max.) Storage Temperature: Process Temperature: 9.6MHz to 70MHz Fundamental 70MHz to 160MHz 3rd O/T see table see table see table see table A ±0.01% (±100ppm) B ±0.1% C ±1.0% 20pF (or other as specified) 500mW max. -10° to +70°C from ±10ppm -40° to +85°C from ±20ppm -55° to +125°C from ±30ppm ±5ppm max. 3000g peak, 0.3ms, ½ sine 20g rms 10-2,000Hz random -10°~+70°C (commercial) -40°~+85°C (industrial) -55°~+125°C (military) -55°C~+125°C 260°C for 20 sec. Specifications are typical at 25°C unless otherwise indicated. Note: the frequency stability characteristics follow that of AT-cut thickness-shear mode. * ** *** Closer calibration available, from ±5ppm Does not include calibration tolerance Higher shock version available SM1 SM2 SM3 0.99 1.04 1.12 1.35 1.40 1.47 Equivalent Circuit L R 1 C C 2 R  Motional Resistance L  Motional Inductance C  Motional Capacitance C Shunt Capacitance CX MINIATURE CRYSTALS 9.6MHz to 160MHz ULTRA-LOW PROFILE MINIATURE SMD CRYSTAL EURO QUARTZ Telephone: +44(0)1460 230000 Fax: +44(0)1460 230001 Email: sales@euroquartz.co.uk Web: www.euroquartz.co.uk CX-6-SM Page 2 of 2 Circuit Design Conventional HCMOS Pierce Oscillator Circuit RB Amplifier Buffer Osc. Freq. (Fo) C5 R) C CX-2 C Solder Pad Layout 1.78 3.05 5.46 Terminations Designation Termination Packaging CX-6-SM - Bulk Pack (Standard) - 16mm tape, 178mm or 330mm reels (Optional) per EIA 481 - Tray Pack (Optional) SM1 SM2 SM3 Gold Plated Nickel, Solder Plated Nickel, Solder Plated and Solder Dipped Order Code O.T.=3rd O.T. Mode Frequency Total Frequency Tolerance CX-6 Blank = Fundamental -SM1 32MHz SM3 (A Calibration Tolerance* @ 25°C A, B, C / 25ppm / 50ppm / I Frequency Stability over Temperature Range Range: ) “S” if special C = Ceramic Lid SM1 or custom design Blank = Glass Lid SM2 Blank if standard Temperature C = Commercial I = Industrial M = Military S = Specify *For other calibration tolerances enter figure in ppm