11-21USOC/S530-A2/TR8

EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 1206 Package Chip LEDs with Inner Lens 11-21USOC/S530-XX/TR8 Features ˙Package in 8mm tape on 7〞diameter reel. ˙Compatible with automatic placement equipment. ˙Compatible with infrared and vapor phase reflow solder process. ˙Mono-color type. Descriptions ˙The 11-21 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ˙Besides, lightweight makes them ideal for miniature applications. etc. Applications ˙Automotive: backlighting in dashboard and switch. ˙Telecommunication: indicator and backlighting in telephone and fax. ˙Flat backlight for LCD, switch and symbol. ˙General use. Device Selection Guide Chip Material Emitted Color AlGaInP Super Sunset Orange Everlight Electronics Co., Ltd. Device No. : DSE-111-031 Lens Color Water Clear http://www.everlight.com ECN : Rev. 1.1 Page: 1 of 7 EVERLIGHT ELECTRONICS CO.,LTD. 11-21USOC/S530-XX/TR8 Package Outline Dimensions Notes: Tolerances Unless Dimension ± 0.1mm , Angle± 0.5° ,Unit = mm Absolute Maximum Ratings (Ta=25℃ ℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Soldering Temperature Tsol Electrostatic Discharge ESD 2000 V Power Dissipation Pd 60 mW IF 160 mA Peak Forward Current (Duty 1/10 @1KHz) Everlight Electronics Co., Ltd. Device No. : DSE-111-031 260 (for 5 second) http://www.everlight.com ECN : ℃ Rev. 1.1 Page: 2 of 7 EVERLIGHT ELECTRONICS CO.,LTD. 11-21USOC/S530-XX/TR8 Electro-Optical Characteristics (Ta=25℃ ℃) Parameter Symbol *Chip Rank Min. Typ. Max. 29 68 97 116 145 --------- 73 106 145 184 223 60 621 ----------------------------- Unit Condition mcd IF=20 mA deg IF=20mA nm IF=20mA Luminous Intensity Iv Viewing Angle 2θ1/2 Peak Wavelength λp A2 A3 A4 A5 A6 --------- Dominant Wavelength λd ----- ----- 615 ----- nm IF=20mA Spectrum Radiation Bandwidth △λ ----- ----- 20 ----- nm IF=20mA Forward Voltage VF ----- ----- 2.0 2.4 V IF=20mA Reverse Current IR ----- ----- ----- 10 μA VR=5V *11-21USOC/S530-XX/TR8 Chip Rank Reel & Carrier Tape Dimensions Loaded quantity per reel 2000 PCS/reel Notes: Tolerances Unless Dimension ± 0.1mm , Angle± 0.5° ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-111-031 http://www.everlight.com ECN : Rev. 1.1 Page: 3 of 7 EVERLIGHT ELECTRONICS CO.,LTD. 11-21USOC/S530-XX/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. : DSE-111-031 http://www.everlight.com ECN : Rev. 1.1 Page: 4 of 7 EVERLIGHT ELECTRONICS CO.,LTD. 11-21USOC/S530-XX/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level : 90 % LTPD : 10 % Test Sample No. Items Test Condition Hours/Cycles Size Temp. : 240℃± 5℃ 6 min. 1 Reflow 22 Pcs. Min. 5 sec. H : +85℃ 30min. 50 Cycles 22 Pcs. 2 Temperature Cycle ∫ 5 min. L : -55℃ 30min. 3 4 5 Thermal Shock High Temperature Storage Low Temperature Storage Ac/Rc 0/1 0/1 H : +100℃ 5min. ∫ 10 sec. L : -10℃ 5min. 50 Cycles 22 Pcs. 0/1 Temp. : 100℃ 1000 Hrs. 22 Pcs. 0/1 Temp. : -55℃ 1000 Hrs. 22 Pcs. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 Pcs. 0/1 7 High Temperature / High Humidity 85℃/R.H85% 1000 Hrs. 22 Pcs. 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-111-031 http://www.everlight.com ECN : Rev. 1.1 Page: 5 of 7 EVERLIGHT ELECTRONICS CO.,LTD. 11-21USOC/S530-XX/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage time 2.1 The operation of Temperature and RH are : 5℃~35℃, RH60%. 2.2 Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life , we suggest our customers to use our products within a year(from production date). 2.3 If opened more than one week in an atmosphere 5℃~35℃, RH 60%, they should be treated at 60℃± 5℃for 15hrs. 2.4 When you discover that the desiccant in the package has a pink color (Normal = blue) , you should treat them in the same conditions as 2.3. Soldering heat Reflow Temp / Time Soldering Iron Basic spec is ≦5 sec when 260℃.If temperature is higher, time should be shorter (+10℃→ -1sec). Power dissipation of Iron should be smaller than 15 W , and temperature should be controllable. Surface temperature of the device should be under 230 ℃. Everlight Electronics Co., Ltd. Device No. : DSE-111-031 http://www.everlight.com ECN : Rev. 1.1 Page: 6 of 7 EVERLIGHT ELECTRONICS CO.,LTD. 11-21USOC/S530-XX/TR8 Rework 1. Customer must finish rework within 5 sec under 245℃. 2. The head of iron can not touch copper foil. 3. Twin-head type is preferred. ○ × EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. : DSE-111-031 Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com ECN : Rev. 1.1 Page: 7 of 7