11-22-R6SGAC-A30-2T

EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Chip LED with Bi-Color(Multi-Color) 11-22/R6SGAC-A30/2T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Multi-color type. ․Pb-Free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 11-22 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Type R6S GA Material AlGaInP InGaN Emitted Color Brilliant Red Brilliant Green Resin Color Water Clear Everlight Electronics Co., Ltd. Device No:SZDSE-112-A02 http://www.everlight.com Prepared date: 12-Jul-2007 Rev 1 Page: 1 of 12 Prepared by:Yuan Shaoxiang Revision :1 Release Date:2008-09-20 00:16:09.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T Package Outline Dimensions Notes: Tolerances Unless Dimension ±0.1mm, Unit = mm Everlight Electronics Co., Ltd. Device No:SZDSE-112-A02 http://www.everlight.com Prepared date: 12-Jul-2007 Rev 1 Page: 2 of 12 Prepared by:Yuan Shaoxiang Revision :1 Release Date:2008-09-20 00:16:09.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T Absolute Maximum Ratings (Ta=25℃) Parameter Reverse Voltage Forward Current Power Dissipation Peak Forward Current (Duty 1/10 @1KHz) Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR Rating 5 R6S:50 GA:25 R6S:100 GA:100 R6S:120 GA:110 R6S:2000 GA:150 -40 ~ +85 Unit V IF mA Pd mW IFP mA ESD V Topr ℃ Tstg -40~ +90 ℃ Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. Device No:SZDSE-112-A02 http://www.everlight.com Prepared date: 12-Jul-2007 Rev 1 Page: 3 of 12 Prepared by:Yuan Shaoxiang Revision :1 Release Date:2008-09-20 00:16:09.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Iv R6S GA Min. 450 715 ----- Typ. --------60 632 518 624 525 20 35 2.0 3.3 ----- Max. 1120 1800 ----- Unit Condition Luminous Intensity mcd Viewing Angle 2θ1/2 deg Peak Wavelength Dominant Wavelength λp R6S GA ----------------1.7 2.7 ----- ----------------2.4 3.7 10 50 nm IF=20mA λd R6S GA nm Spectrum Radiation △λ R6S Bandwidth Forward Voltage VF GA nm R6S GA V Reverse Current IR R6S GA μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±11% Everlight Electronics Co., Ltd. Device No:SZDSE-112-A02 http://www.everlight.com Prepared date: 12-Jul-2007 Rev 1 Page: 4 of 12 Prepared by:Yuan Shaoxiang Revision :1 Release Date:2008-09-20 00:16:09.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T Bin Range Of Luminous Intensity R6S Bin Min U 450 V 715 GA Bin V W Min 715 1120 Max 1120 1800 Unit mcd Condition IF =20mA Max 715 1120 Unit mcd Condition IF =20mA Notes: 1.Tolerance of Luminous Intensity ±11% Everlight Electronics Co., Ltd. Device No:SZDSE-112-A02 http://www.everlight.com Prepared date: 12-Jul-2007 Rev 1 Page: 5 of 12 Prepared by:Yuan Shaoxiang Revision :1 Release Date:2008-09-20 00:16:09.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T Typical Electro-Optical Characteristics Curves R6S Spectrum Distribution Relative luminous intensity (%) 100 75 Ta=25°C I (mA) 50 40 30 25 20 10 0 1.2 1.6 2.0 2.4 2.8 3.0 Forward Voltage V F (V) Luminous Intensity vs Forward Current Ta=25°C Forward Current vs. Forward Voltage Ta=25°C 50 25 0 500 550 600 650 Wavelength λ (nm) L uminous Intensity vs. 700 Relative luminous intensity (%) Ambient Temperature Ta (°C) Forward Current Derating Curve 50 IF(mA) 40 30 20 10 0 0 20 Relative luminous intensity (%) Ambient Temperature Forward Current F Forward Current IF(mA) Radiation Diagram Ta=25°C Forward Current 40 60 85 100 Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. Device No:SZDSE-112-A02 http://www.everlight.com Prepared date: 12-Jul-2007 Rev 1 Page: 6 of 12 Prepared by:Yuan Shaoxiang Revision :1 Release Date:2008-09-20 00:16:09.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T Typical Electro-Optical Characteristics Curves GA Ta=25°C Relative luminous intensity ( % ) I (mA) Ta=25°C Wavelength λ(nm) Forward Current Forward Voltage VF (V) Ta=25°C Relative luminous intensity ( % ) Relative luminous intensity ( %) Ambient Temperature Ta (°C ) Forward Current I (mA) Ta=25°C I (mA) Forward Current Ambient Temperature Ta (°C ) Everlight Electronics Co., Ltd. Device No:SZDSE-112-A02 http://www.everlight.com Prepared date: 12-Jul-2007 Rev 1 Page: 7 of 12 Prepared by:Yuan Shaoxiang Revision :1 Release Date:2008-09-20 00:16:09.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank xxxxxx xxxxxx RoHS xxxxxxxxxxxx xxxx xxxxxxxx Reel Dimensions Note: Tolerances Unless Dimension ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. Device No:SZDSE-112-A02 http://www.everlight.com Prepared date: 12-Jul-2007 Rev 1 Page: 8 of 12 Prepared by:Yuan Shaoxiang Revision :1 Release Date:2008-09-20 00:16:09.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: Tolerances Unless Dimension ±0.1mm , Unit = mm Moisture Resistant Packaging Label Aluminum moistue-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No:SZDSE-112-A02 http://www.everlight.com Prepared date: 12-Jul-2007 Rev 1 Page: 9 of 12 Prepared by:Yuan Shaoxiang Revision :1 Release Date:2008-09-20 00:16:09.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. 1 2 Items Reflow Soldering Temperature Cycle Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ IF = 20 mA 85℃/ 85%RH Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS. 22 PCS. Ac/Re 0/1 0/1 3 4 5 6 7 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No:SZDSE-112-A02 http://www.everlight.com Prepared date: 12-Jul-2007 Rev 1 Page: 10 of 12 Prepared by:Yuan Shaoxiang Revision :1 Release Date:2008-09-20 00:16:09.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 ℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 ℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No:SZDSE-112-A02 http://www.everlight.com Prepared date: 12-Jul-2007 Rev 1 Page: 11 of 12 Prepared by:Yuan Shaoxiang Revision :1 Release Date:2008-09-20 00:16:09.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No:SZDSE-112-A02 http://www.everlight.com Prepared date: 12-Jul-2007 Rev 1 Page: 12 of 12 Prepared by:Yuan Shaoxiang Revision :1 Release Date:2008-09-20 00:16:09.0 Expired Period: Forever LifecyclePhase: