EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Right Angle Lens Chip LEDs with Bi-Color (Multi-Color)
12-22/G6R8C-A30/2C
Features
․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Multi-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version.
Descriptions
․ The 12-22 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc.
Applications
․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use.
Device Selection Guide
Chip Type G6 R8 Material AlGaInP AlGaInP Emitted Color Brilliant Yellow Green Resin Color Water Clear
Deep Red
Everlight Electronics Co., Ltd. Device No: SZDSE-122-A24
http://www.everlight.com Prepared date:10-Nov-2007
Rev: 1
Page: 1 of 12
Prepared by: LeiHui
Revision
:1
Release Date:2008-09-20 00:16:09.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
12-22/G6R8C-A30/2C
Package Outline Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev: 1
Page: 2 of 12
Revision
:1 Device No: SZDSE-122-A24
Release Prepared date:10-Nov-2007
Date:2008-09-20 00:16:09.0 Prepared by: LeiHui
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
12-22/G6R8C-A30/2C
Absolute Maximum Ratings (Ta=25℃)
Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Symbol VR IF Rating 5 G6:25 R8:25 G6:60 R8:60 G6:60 R8:60 G6:2000 R8:2000 -40 ~ +85 -40~ +90 Unit V mA
IFP Pd
mA mW
Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature
ESD Topr Tstg Tsol
V ℃ ℃
Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev: 1
Page: 3 of 12
Revision
:1 Device No: SZDSE-122-A24
Release Prepared date:10-Nov-2007
Date:2008-09-20 00:16:09.0 Prepared by: LeiHui
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
12-22/G6R8C-A30/2C
Electro-Optical Characteristics (Ta=25℃)
Parameter
Luminous Intensity
R8
Symbol Iv
G6
Min. 28.5 28.5 ---------------------
Typ. --------120 575 650 573 639 20
Max. 72.0 72.0 -------------
Unit mcd deg nm
Condition
Viewing Angle Peak Wavelength
2θ1/2 Λp
G6 R8
λd
Dominant Wavelength
G6 R8
nm --------20 1.7 1.7 ----2.0 2.0 ----2.4 2.4 10 10 μA V nm △λ
G6 R8
IF=20mA
Spectrum Radiation Bandwidth
Forward Voltage
VF
G6 R8
Reverse Current
IR
G6 R8
VR=5V
Notes:
1.Tolerance of Luminous Intensity ±11%
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev: 1
Page: 4 of 12
Revision
:1 Device No: SZDSE-122-A24
Release Prepared date:10-Nov-2007
Date:2008-09-20 00:16:09.0 Prepared by: LeiHui
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
12-22/G6R8C-A30/2C
Bin Range Of Luminous Intensity G6
Bin N P Min 28.5 45.0 Max 45.0 72.0 Unit mcd Condition IF=20mA
R8
Bin N P Min 28.5 45.0 Max 45.0 72.0 Unit mcd Condition IF=20mA
Notes:
1.Tolerance of Luminous Intensity ±11%
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev: 1
Page: 5 of 12
Revision
:1 Device No: SZDSE-122-A24
Release Prepared date:10-Nov-2007
Date:2008-09-20 00:16:09.0 Prepared by: LeiHui
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
12-22/G6R8C-A30/2C
Typical Electro-Optical Characteristics Curves
G6
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev: 1
Page: 6 of 12
Revision
:1 Device No: SZDSE-122-A24
Release Prepared date:10-Nov-2007
Date:2008-09-20 00:16:09.0 Prepared by: LeiHui
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
12-22/G6R8C-A30/2C
Typical Electro-Optical Characteristics Curves
R8
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev: 1
Page: 7 of 12
Revision
:1 Device No: SZDSE-122-A24
Release Prepared date:10-Nov-2007
Date:2008-09-20 00:16:09.0 Prepared by: LeiHui
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
12-22/G6R8C-A30/2C
Label explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev: 1
Page: 8 of 12
Revision
:1 Device No: SZDSE-122-A24
Release Prepared date:10-Nov-2007
Date:2008-09-20 00:16:09.0 Prepared by: LeiHui
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
12-22/G6R8C-A30/2C
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev: 1
Page: 9 of 12
Revision
:1 Device No: SZDSE-122-A24
Release Prepared date:10-Nov-2007
Date:2008-09-20 00:16:09.0 Prepared by: LeiHui
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
12-22/G6R8C-A30/2C
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level:90% LTPD:10%
No. 1
Items Reflow Soldering
Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ IF = 20 mA 85℃/ 85%RH
Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS.
Ac/Re 0/1
2
Temperature Cycle
22 PCS.
0/1
3
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
300 Cycles
22 PCS.
0/1
4 5 6 7
1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS. 22 PCS. 22 PCS. 22 PCS.
0/1 0/1 0/1 0/1
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev: 1
Page: 10 of 12
Revision
:1 Device No: SZDSE-122-A24
Release Prepared date:10-Nov-2007
Date:2008-09-20 00:16:09.0 Prepared by: LeiHui
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
12-22/G6R8C-A30/2C
Precautions For Use
1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 ℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev: 1
Page: 11 of 12
Revision
:1 Device No: SZDSE-122-A24
Release Prepared date:10-Nov-2007
Date:2008-09-20 00:16:09.0 Prepared by: LeiHui
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
12-22/G6R8C-A30/2C
4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev: 1
Page: 12 of 12
Revision
:1 Device No: SZDSE-122-A24
Release Prepared date:10-Nov-2007
Date:2008-09-20 00:16:09.0 Prepared by: LeiHui
LifecyclePhase:
Expired Period: Forever