12-23C/R6GHBHC-A01/2C

SMD  B 12-23C/R6GHBHC-A01/2C Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Multi-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Description ․The 12-23C SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. 1 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0005517 Rev.6 www.everlight.com DATASHEET SMD  B 12-23C/R6GHBHC-A01/2C Device Selection Guide Code Chip Materials Emitted Color R6 AlGaInP Brilliant Red GH InGaN Brilliant Green BH InGaN Blue 2 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0005517 Rev.6 Resin Color Water Clear www.everlight.com DATASHEET SMD  B 12-23C/R6GHBHC-A01/2C Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Rating Unit VR 5 V IF 25 mA IFP Pd ESD Code R6 60 GH 100 BH 100 R6 60 GH 95 BH 95 R6 2000 GH 150 BH 150 mA mW V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol 3 Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0005517 Rev.6 www.everlight.com DATASHEET SMD  B 12-23C/R6GHBHC-A01/2C Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Luminous Intensity Viewing Angle Iv Code Min. Typ. R6 63 90 GH 125 180 BH 32 50 ----- 100 2θ1/2 R6 Peak Wavelength GH Unit ----- mcd ----- Deg ------ nm ----- nm ----- nm Condition 632 ----- 518 BH 468 R6 624 IF=20mA Dominant λ d Wavelength Spectrum λ p Max. Radiation Bandwidth Forward Voltage △λ VF GH ----- 525 BH 470 R6 20 GH ----- 35 BH 25 R6 2.0 2.4 3.3 3.9 3.3 3.9 GH ----- BH R6 Reverse Current IR GH BH V 10 ----- ----- 50 μA VR=5V 50 Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Forward Voltage: ±0.1V 4 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0005517 Rev.6 www.everlight.com DATASHEET SMD  B 12-23C/R6GHBHC-A01/2C Typical Electro-Optical Characteristics Curves R6 5 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0005517 Rev.6 www.everlight.com DATASHEET SMD  B 12-23C/R6GHBHC-A01/2C Typical Electro-Optical Characteristics Curves GH 6 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0005517 Rev.6 www.everlight.com DATASHEET SMD  B 12-23C/R6GHBHC-A01/2C Typical Electro-Optical Characteristics Curves BH 7 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0005517 Rev.6 www.everlight.com DATASHEET SMD  B 12-23C/R6GHBHC-A01/2C Package Dimension Suggested pad dimension is just for reference only. Please modify the pad dimension based on individual need. Note: Tolerances unless mentioned ±0.1mm. Unit = mm 8 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0005517 Rev.6 www.everlight.com DATASHEET SMD  B 12-23C/R6GHBHC-A01/2C Moisture Resistant Packing Materials Label Explanation Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Chromaticity Coordinates & Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm 9 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0005517 Rev.6 www.everlight.com DATASHEET SMD  B 12-23C/R6GHBHC-A01/2C Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label 10 Aluminum moisture-proof bag Desiccant Label Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0005517 Rev.6 www.everlight.com DATASHEET SMD  B 12-23C/R6GHBHC-A01/2C Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 260°C Max. 10sec. Max. Above255°C 30sec.Max. 3°C/sec.Max. 6°C/sec.Max. Pre-heating Above 217°C 60~150sec. 150~200°C 60~120sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 11 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0005517 Rev.6 www.everlight.com DATASHEET SMD  B 12-23C/R6GHBHC-A01/2C Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. 12 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0005517 Rev.6 www.everlight.com