EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Chip LED with Bi-Color (Multi-Color)
15-22/R6G6C-A32/2T
Features
․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Multi-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version.
Descriptions
․The 15-22 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc.
Applications
․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use.
Device Selection Guide
Chip Type R6 G6 Material AlGaInP AlGaInP
Emitted Color Brilliant Red Brilliant Yellow Green
Resin Color
Water Clear
Everlight Electronics Co., Ltd. Device No:DSE-0000333
http://www.everlight.com Prepared date: 31-Oct-2008
Rev 1 Page: 1 of 12 Prepared by: Qilong Chen
EVERLIGHT ELECTRONICS CO.,LTD.
15-22/R6G6C-A32/2T
Package Outline Dimensions
Note: The tolerances unless mentioned is ±0.1mm,Unit = mm
Everlight Electronics Co., Ltd. Device No:DSE-0000333
http://www.everlight.com Prepared date: 31-Oct-2008
Rev 1 Page: 2 of 12 Prepared by: Qilong Chen
EVERLIGHT ELECTRONICS CO.,LTD.
15-22/R6G6C-A32/2T
Absolute Maximum Ratings (Ta=25℃)
Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 R6:25 G6:25 R6:60 G6:60 R6:60 G6:60 R6:2000 G6:2000 -40 ~ +85 -40~ +90 Unit V mA mA mW V ℃ ℃
Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec.
Everlight Electronics Co., Ltd. Device No:DSE-0000333
http://www.everlight.com Prepared date: 31-Oct-2008
Rev 1 Page: 3 of 12 Prepared by: Qilong Chen
EVERLIGHT ELECTRONICS CO.,LTD.
15-22/R6G6C-A32/2T
Electro-Optical Characteristics (Ta=25℃) Parameter
Luminous Intensity Viewing Angle Peak Wavelength λp Iv Symbol
R6 G6
Min. 28.5 28.5 --------617.5 567.5
Typ. ---140 632 575 --------20 20 2.0 2.0
Max. 72.0 72.0 --------633.5 577.5 ----2.4 2.4 10 10
Unit mcd deg nm
Condition
2θ1/2
R6 G6
Dominant Wavelength Spectrum Radiation Bandwidth
λd
R6 G6
nm
IF=20mA
△λ
R6 G6
----1.7 1.7
nm
Forward Voltage
VF
R6 G6
V
Reverse Current
IR
R6 G6
-----
-----
µA
VR=5V
Notes:
1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm
Everlight Electronics Co., Ltd. Device No:DSE-0000333
http://www.everlight.com Prepared date: 31-Oct-2008
Rev 1 Page: 4 of 12 Prepared by: Qilong Chen
EVERLIGHT ELECTRONICS CO.,LTD.
15-22/R6G6C-A32/2T
Bin Range Of Luminous Intensity R6
Bin N P Min 28.5 45.0 Max 45.0 72.0 Unit mcd Condition IF =20mA
G6
Bin N P Min 28.5 45.0 Max 45.0 72.0 Unit mcd Condition IF =20mA
Notes:
1.Tolerance of Luminous Intensity ±11%
Everlight Electronics Co., Ltd. Device No:DSE-0000333
http://www.everlight.com Prepared date: 31-Oct-2008
Rev 1 Page: 5 of 12 Prepared by: Qilong Chen
EVERLIGHT ELECTRONICS CO.,LTD.
15-22/R6G6C-A32/2T
Typical Electro-Optical Characteristics Curves
R6
Everlight Electronics Co., Ltd. Device No:DSE-0000333
http://www.everlight.com Prepared date: 31-Oct-2008
Rev 1 Page: 6 of 12 Prepared by: Qilong Chen
EVERLIGHT ELECTRONICS CO.,LTD.
15-22/R6G6C-A32/2T
Typical Electro-Optical Characteristics Curves
G6
Everlight Electronics Co., Ltd. Device No:DSE-0000333
http://www.everlight.com Prepared date: 31-Oct-2008
Rev 1 Page: 7 of 12 Prepared by: Qilong Chen
EVERLIGHT ELECTRONICS CO.,LTD.
15-22/R6G6C-A32/2T
Label explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
xxxxxx xxxxxx
RoHS
xxxxxxxxxxxx xxxx xxxxxxxx
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No:DSE-0000333
http://www.everlight.com Prepared date: 31-Oct-2008
Rev 1 Page: 8 of 12 Prepared by: Qilong Chen
EVERLIGHT ELECTRONICS CO.,LTD.
15-22/R6G6C-A32/2T
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: Tolerances Unless Dimension ±0.1mm, Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd. Device No:DSE-0000333
http://www.everlight.com Prepared date: 31-Oct-2008
Rev 1 Page: 9 of 12 Prepared by: Qilong Chen
EVERLIGHT ELECTRONICS CO.,LTD.
15-22/R6G6C-A32/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10%
No. 1 2
Items Reflow Soldering Temperature Cycle
Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ IF = 20 mA 85℃/ 85%RH
Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS. 22 PCS.
Ac/Re 0/1 0/1
3 4 5 6 7
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS.
0/1 0/1 0/1 0/1 0/1
Everlight Electronics Co., Ltd. Device No:DSE-0000333
http://www.everlight.com Prepared date: 31-Oct-2008
Rev 1 Page: 10 of 12 Prepared by: Qilong Chen
EVERLIGHT ELECTRONICS CO.,LTD.
15-22/R6G6C-A32/2T
Precautions For Use
1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. Device No:DSE-0000333
http://www.everlight.com Prepared date: 31-Oct-2008
Rev 1 Page: 11 of 12 Prepared by: Qilong Chen
EVERLIGHT ELECTRONICS CO.,LTD.
15-22/R6G6C-A32/2T
4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Everlight Electronics Co., Ltd. Device No:DSE-0000333
http://www.everlight.com Prepared date: 31-Oct-2008
Rev 1 Page: 12 of 12 Prepared by: Qilong Chen
