16-213/BHC-ZL1M2B6Y/3T

EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 0402 Package Chip LED (0.45mm Height) 16-213/BHC-ZL1M2B6Y/3T Features ԦPackage in 8mm tape on 7ϛdiameter reel. ԦCompatible with automatic placement equipment. ԦCompatible with infrared and vapor phase reflow solder process. ԦMono-color type. ԦPb-free. ԦThe product itself will remain within RoHS compliant version. Descriptions ԦThe 16-213 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ԦBesides, lightweight makes them ideal for miniature applications. etc. Applications ԦBacklighting in dashboard and switch. ԦTelecommunication: indicator and backlighting in telephone and fax. ԦFlat backlight for LCD, switch and symbol. ԦGeneral use. Device Selection Guide Part No. 16-213/BHC-ZL1M2B6Y/3T Chip Material Emitted Color InGaN Blue Resin Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 1 of 11 Device No. : DSE-163-B06 Prepared date: 01-Aug-2007 Prepared by: Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 16-213/BHC-ZL1M2B6Y/3T Package Outline Dimensions Note: The tolerances unless mentioned is ²0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 2 of 11 Device No. : DSE-163-B06 Prepared date: 01-Aug-2007 Prepared by: Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 16-213/BHC-ZL1M2B6Y/3T Absolute Maximum Ratings (Ta=25к) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA IFP 100 mA Power Dissipation Pd 110 mW Electrostatic Discharge(HBM) ESD 150 V Operating Temperature Topr -40 ~ +85 к Storage Temperature Tstg -40 ~ +90 к Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 к for 10 sec. Hand Soldering : 350 к for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 3 of 11 Device No. : DSE-163-B06 Prepared date: 01-Aug-2007 Prepared by: Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 16-213/BHC-ZL1M2B6Y/3T Electro-Optical Characteristics (Ta=25к) Parameter Symbol Min. Typ. Max. Unit Luminous Intensity Iv 11.5 ---- 28.5 mcd Viewing Angle 2Ӱ1/2 ---- 120 ---- deg Peak Wavelength ӳp ---- 468 ---- nm ---- 475 nm Condition IF=5mA Dominant Wavelength Spectrum Radiation Bandwidth ӳd 465 Ϧӳ ---- 35 ---- nm Forward Voltage VF 2.7 ---- 3.0 V Reverse Current IR ---- ---- 50 ӴA VR=5V Notes: 1.Tolerance of Luminous Intensity ²11% 2.Tolerance of Dominant Wavelength ²1nm 3.Tolerance of Forward Voltage ²0.05V Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 4 of 11 Device No. : DSE-163-B06 Prepared date: 01-Aug-2007 Prepared by: Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 16-213/BHC-ZL1M2B6Y/3T Bin Range Of Dom. Wavelength Group Z Bin Min Max X 465 470 Y 470 475 Unit Condition nm IF=5mA Bin Range Of Luminous Intensity Bin Min Max L1 11.5 14.5 L2 14.5 18.0 M1 18.0 22.5 M2 22.5 28.5 Unit Condition mcd IF=5mA Bin Range Of Forward Voltage Group B6 Bin Min Max 29 2.7 2.8 30 2.8 2.9 31 2.9 3.0 Unit Condition V IF=5mA Notes: 1.Tolerance of Luminous Intensity ²11% 2.Tolerance of Dominant Wavelength ²1nm 3.Tolerance of Forward Voltage ²0.05V Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 5 of 11 Device No. : DSE-163-B06 Prepared date: 01-Aug-2007 Prepared by: Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 16-213/BHC-ZL1M2B6Y/3T Typical Electro-Optical Characteristics Curves Forward Current vs. Forward Voltage 75 50 25 0 450 400 500 550 50 40 30 25 20 10 0 2.6 600 3.0 3.4 3.8 4.2 Luminous Intensity vs. Luminous Intensity vs. Ambient Temperature Forward Current 1000 100 10 1 -60 -40 -20 0 4.5 Forward Voltage VF (V) Relative luminous intensity (%) Relative luminous intensity (%) Wavelength Ȝ (nm) Ta=25°C 1000 f=1KHz Duty=1/10 100 10 1 10 20 40 60 80 100 2 1 10 10 Forward Current IF (mA) Ambient Temperature Ta (°C) Radiation Diagram 0° 10° Forward Current Derating Curve Forward Current IF (mA) Ta=25°C Ta=25°C 100 Forward Current IF (mA) Relative luminous intensity (%) Spectrum Distribution 50 Ta=25°C 20° 30° 40 40° 1.0 30 25 20 10 0 0.9 50° 0.8 60° 70° 0.7 0 20 40 60 85 100 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (°C) ! Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 6 of 11 Device No. : DSE-163-B06 Prepared date: 01-Aug-2007 Prepared by: Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 16-213/BHC-ZL1M2B6Y/3T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ²0.1mm , Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 7 of 11 Device No. : DSE-163-B06 Prepared date: 01-Aug-2007 Prepared by: Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 16-213/BHC-ZL1M2B6Y/3T Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ²0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 8 of 11 Device No. : DSE-163-B06 Prepared date: 01-Aug-2007 Prepared by: Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 16-213/BHC-ZL1M2B6Y/3T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence levelΚ90% LTPDΚ10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260к²5к Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100к 15min Н 5 min L : -40к 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100к 5min Н 10 sec L : -10к 5min 300 Cycles 22 PCS. 0/1 Temp. : 100к 1000 Hrs. 22 PCS. 0/1 Temp. : -40к 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85к/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 9 of 11 Device No. : DSE-163-B06 Prepared date: 01-Aug-2007 Prepared by: Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 16-213/BHC-ZL1M2B6Y/3T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30к or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30к or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60²5к for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 10 of 11 Device No. : DSE-163-B06 Prepared date: 01-Aug-2007 Prepared by: Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 16-213/BHC-ZL1M2B6Y/3T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350к for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 11 of 11 Device No. : DSE-163-B06 Prepared date: 01-Aug-2007 Prepared by: Ashley Kuo