16-216/S3W-AM1N2BY/3T

EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 0402 Package Chip LED (0.35mm Height) 16-216/S3W-AM1N2BY/3T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․Component solderable surface finish material is gold. ․The product itself will remain within RoHS compliant version. Descriptions ․The 16-216 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. ․Indoor signboard use. Device Selection Guide Part No. 16-216/S3W-AM1N2BY/3T Chip Resin Color Material Emitted Color AlGaInP Brilliant Orange White Diffused Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 1 of 10 Device No. : DSE-166-S01 Prepared date: 21-Aug-2007 Prepared by: Esther Yan EVERLIGHT ELECTRONICS CO.,LTD. 16-216/S3W-AM1N2BY/3T Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 2 of 10 Device No. : DSE-166-S01 Prepared date: 21-Aug-2007 Prepared by: Esther Yan EVERLIGHT ELECTRONICS CO.,LTD. 16-216/S3W-AM1N2BY/3T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 60 mA Power Dissipation Pd 60 mW Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Luminous Intensity Iv 18.0 ---- 45.0 mcd Viewing Angle 2θ1/2 ---- 130 ---- deg Peak Wavelength λp ---- 621 ---- nm 615.0 625.5 nm Condition IF=5mA Dominant Wavelength Spectrum Radiation Bandwidth λd 605.5 △λ ---- 18 ---- nm Forward Voltage VF 1.75 ---- 2.35 V Reverse Current IR ---- ---- 10 μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 3 of 10 Device No. : DSE-166-S01 Prepared date: 21-Aug-2007 Prepared by: Esther Yan EVERLIGHT ELECTRONICS CO.,LTD. 16-216/S3W-AM1N2BY/3T Bin Range Of Dom. Wavelength Group A Bin Min Max E1 605.5 609.5 E2 609.5 613.5 E3 613.5 617.5 E4 617.5 621.5 E5 621.5 625.5 Unit Condition nm IF=5mA Unit Condition mcd IF=5mA Unit Condition V IF=5mA Bin Range Of Luminous Intensity Bin Min Max M1 18.0 22.5 M2 22.5 28.5 N1 28.5 36.0 N2 36.0 45.0 Bin Range Of Forward Voltage Group B Bin Min Max 0 1.75 1.95 1 1.95 2.15 2 2.15 2.35 Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 4 of 10 Device No. : DSE-166-S01 Prepared date: 21-Aug-2007 Prepared by: Esther Yan EVERLIGHT ELECTRONICS CO.,LTD. 16-216/S3W-AM1N2BY/3T Typical Electro-Optical Characteristics Curves Forward Current vs. Forward Voltage Ta=25°C Ta=25°C 50 I (mA) 100 40 F 75 30 Forward Current Relative luminous intensity (%) Spectrum Distribution 50 25 0 500 550 600 650 25 20 10 0 1.2 700 2.0 2.8 3.0 Luminous Intensity vs Luminous Intensity vs. Forward Current 1000 100 10 1 -60 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta (°C) Relative luminous intensity (%) Ambient Temperature 1000 Ta=25°C f=1KHz Duty=1/10 100 10 1 10 10 10 Forward Current IF(mA) Radiation Diagram Forward Current Derating Curve 0° 50 Ta=25°C 20° 10° 30° 40 Forward Current F I (mA) 2.4 Forward Voltage VF (V) Wavelength λ (nm) Relative luminous intensity (%) 1.6 30 25 20 10 0 40° 1.0 0.9 50° 0.8 60° 70° 0.7 20 0 40 60 85 100 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 5 of 10 Device No. : DSE-166-S01 Prepared date: 21-Aug-2007 Prepared by: Esther Yan EVERLIGHT ELECTRONICS CO.,LTD. 16-216/S3W-AM1N2BY/3T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm , Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 6 of 10 Device No. : DSE-166-S01 Prepared date: 21-Aug-2007 Prepared by: Esther Yan EVERLIGHT ELECTRONICS CO.,LTD. 16-216/S3W-AM1N2BY/3T Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 7 of 10 Device No. : DSE-166-S01 Prepared date: 21-Aug-2007 Prepared by: Esther Yan EVERLIGHT ELECTRONICS CO.,LTD. 16-216/S3W-AM1N2BY/3T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 Thermal Shock 4 5 6 7 High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity Test Condition Test Sample Hours/Cycles Size Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ Ac/Re 6 Min. 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 22 PCS. 0/1 22 PCS. 0/1 1000 Hrs. 1000 Hrs. IF = 20 mA 1000 Hrs. 22 PCS. 0/1 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 8 of 10 Device No. : DSE-166-S01 Prepared date: 21-Aug-2007 Prepared by: Esther Yan EVERLIGHT ELECTRONICS CO.,LTD. 16-216/S3W-AM1N2BY/3T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 9 of 10 Device No. : DSE-166-S01 Prepared date: 21-Aug-2007 Prepared by: Esther Yan EVERLIGHT ELECTRONICS CO.,LTD. 16-216/S3W-AM1N2BY/3T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 10 of 10 Device No. : DSE-166-S01 Prepared date: 21-Aug-2007 Prepared by: Esther Yan