16-219A-T2D-AR2T1QY-3T

Technical Data Sheet 0402 Package Chip LED (0.2mm Height) 16-219A/T2D-AR2T1QY/3T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. ․The maximum height is 0.25mm Descriptions ․The 16-219A SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․ Besides, lightweight makes them ideal for miniature applications. etc Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General Device Selection Guide Chip Part No. Material 16-219A/T2D-AR2T1QY/3T InGaN Emitted Color Pure White Yellow Diffused Resin Color Everlight Electronics Co., Ltd. Device No. : DSE-0001281 http://www.everlight.com Prepared date:15-Dec-2009 Rev.2 Page: 1 of 12 Prepared by: Esther Yan Revision :2 Release Date:2009-12-16 17:08:11.0 Expired Period: Forever LifecyclePhase: 16-219A/T2D-AR2T1QY/3T Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0001281 http://www.everlight.com Prepared date:15-Dec-2009 Rev.2 Page: 2 of 12 Prepared by: Esther Yan Revision :2 Release Date:2009-12-16 17:08:11.0 Expired Period: Forever LifecyclePhase: 16-219A/T2D-AR2T1QY/3T Absolute Maximum Ratings (Ta=25℃) Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 10 20 30 150 -40 ~ +85 -40 ~ +90 Unit V mA mA mW V ℃ ℃ Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Viewing Angle Forward Voltage Reverse Current Symbol Min. Typ. Max. Unit mcd deg V μA VR=5V IF=5mA Condition Iv 2θ1/2 VF IR 140 ---2.7 ---- ---130 ------- 360 ---3.2 50 Note : 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Forward Voltage ±0.05V Everlight Electronics Co., Ltd. Device No. : DSE-0001281 http://www.everlight.com Prepared date:15-Dec-2009 Rev.2 Page: 3 of 12 Prepared by: Esther Yan Revision :2 Release Date:2009-12-16 17:08:11.0 Expired Period: Forever LifecyclePhase: 16-219A/T2D-AR2T1QY/3T Bin Range Of Luminous Intensity Bin R2 S1 S2 T1 Min 140 180 225 285 Max 180 225 285 360 mcd IF=5mA Unit Condition Bin Range Of Forward Voltage Group Bin 29 30 Q 31 32 33 Min 2.70 2.80 2.90 3.00 3.10 Max 2.80 2.90 3.00 3.10 3.20 V IF=5mA Unit Condition 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Forward Voltage ±0.05V Everlight Electronics Co., Ltd. Device No. : DSE-0001281 http://www.everlight.com Prepared date:15-Dec-2009 Rev.2 Page: 4 of 12 Prepared by: Esther Yan Revision :2 Release Date:2009-12-16 17:08:11.0 Expired Period: Forever LifecyclePhase: 16-219A/T2D-AR2T1QY/3T Chromaticity Coordinates Specifications for Bin Grading Group Bin Code 1 CIE_x 0.274 0.274 0.294 0.294 0.274 0.274 0.294 0.294 0.294 0.294 0.314 0.314 0.294 0.294 0.314 0.314 0.314 0.314 0.334 0.334 0.314 0.314 0.334 0.334 CIE_y 0.226 0.258 0.286 0.254 0.258 0.291 0.319 0.286 0.254 0.286 0.315 0.282 0.286 0.319 0.347 0.315 0.282 0.315 0.343 0.311 0.315 0.347 0.376 0.343 Condition 2 3 A 4 IF=5mA 5 6 Notes: 1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01). 2.The products are sensitive to static electricity and care must be fully taken when handling products. Everlight Electronics Co., Ltd. Device No. : DSE-0001281 http://www.everlight.com Prepared date:15-Dec-2009 Rev.2 Page: 5 of 12 Prepared by: Esther Yan Revision :2 Release Date:2009-12-16 17:08:11.0 Expired Period: Forever LifecyclePhase: 16-219A/T2D-AR2T1QY/3T CIE Chromaticity Diagram Everlight Electronics Co., Ltd. Device No. : DSE-0001281 http://www.everlight.com Prepared date:15-Dec-2009 Rev.2 Page: 6 of 12 Prepared by: Esther Yan Revision :2 Release Date:2009-12-16 17:08:11.0 Expired Period: Forever LifecyclePhase: 16-219A/T2D-AR2T1QY/3T Typical Electro-Optical Characteristics Curves Spectrum Distribution Ta=25°C Relative luminous intensity (%) Forward Current FI (mA) Forward Current vs. Forward Voltage Ta=25°C Wavelength λ (nm) Luminous Intensity vs. Ambient Temperature Relative luminous intensity ( ) % Relative luminous intensity ( ) % Forward Voltage VF (V) Luminous Intensity vs. Forward Current Ta=25°C Ambient Temperature Ta (°C) Forward Current Derating Curve Forward Current FI (mA) Forward Current Radiation Diagram F I (mA) Ta=25°C Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. Device No. : DSE-0001281 http://www.everlight.com Prepared date:15-Dec-2009 Rev.2 Page: 7 of 12 Prepared by: Esther Yan Revision :2 Release Date:2009-12-16 17:08:11.0 Expired Period: Forever LifecyclePhase: 16-219A/T2D-AR2T1QY/3T Label Explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Pb EVERLIGHT RoHS CAT : XXX HUE : XXX REF : XXX CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0001281 http://www.everlight.com Prepared date:15-Dec-2009 Rev.2 Page: 8 of 12 Prepared by: Esther Yan Revision :2 Release Date:2009-12-16 17:08:11.0 Expired Period: Forever LifecyclePhase: 16-219A/T2D-AR2T1QY/3T Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No. : DSE-0001281 http://www.everlight.com Prepared date:15-Dec-2009 Rev.2 Page: 9 of 12 Prepared by: Esther Yan Revision :2 Release Date:2009-12-16 17:08:11.0 Expired Period: Forever LifecyclePhase: 16-219A/T2D-AR2T1QY/3T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Temp. : 260℃±5℃ Min. 10sec. Test Sample Ac/Re Hours/Cycles Size 1 Reflow Soldering 6 Min. 22 PCS. 0/1 2 H : +100℃ 15min Temperature Cycle ∫ 5 min 300 Cycles L : -40℃ 15min Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ 22 PCS. 0/1 3 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Low Temperature Storage 1000 Hrs. 22 PCS. 0/1 5 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-0001281 http://www.everlight.com Prepared date:15-Dec-2009 Rev.2 Page: 10 of 12 Prepared by: Esther Yan Revision :2 Release Date:2009-12-16 17:08:11.0 Expired Period: Forever LifecyclePhase: 16-219A/T2D-AR2T1QY/3T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile A b o ve2 5 5°C 30 se c.M ax . 2 6 0°C M ax . 1 0sec. M ax . 6°C /sec.M ax. 3 °C /sec.M ax. A b o v e 2 1 7 °C 6 0~ 1 5 0 sec. P re-h eatin g 1 5 0 ~ 2 0 0 °C 6 0 ~ 1 2 0 sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No. : DSE-0001281 http://www.everlight.com Prepared date:15-Dec-2009 Rev.2 Page: 11 of 12 Prepared by: Esther Yan Revision :2 Release Date:2009-12-16 17:08:11.0 Expired Period: Forever LifecyclePhase: 16-219A/T2D-AR2T1QY/3T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : DSE-0001281 http://www.everlight.com Prepared date:15-Dec-2009 Rev.2 Page: 12 of 12 Prepared by: Esther Yan Revision :2 Release Date:2009-12-16 17:08:11.0 Expired Period: Forever LifecyclePhase: