17-21/GHC-XS1T2M/3T

SMD  B 17-21/GHC-XS1T2M/3T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Description ․The 17-21 SMD LED is much smaller than lead frame type components, thus enable smaller board ize, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. 1 Copyright Revision :2 © LifecyclePhase: 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0009337 Rev.2 Release Date:2013-08-02 14:09:29.0 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 17-21/GHC-XS1T2M/3T ․General use. Device Selection Guide Chip Emitted Color Resin Color Brilliant Water Clear Materials InGaN Green Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 20 mA IFP 100 mA Power Dissipation Pd 75 mW Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Electrostatic Discharge ESDHBM 2000 V Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) 2 Copyright Revision :2 © LifecyclePhase: Release Date:2013-08-02 14:09:29.0 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0009337 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 17-21/GHC-XS1T2M/3T Parameter Symbol Min. Typ. Max. Unit Luminous Intensity Iv 180 ----- 450 mcd Viewing Angle 2θ1/2 ----- 140 ----- deg Peak Wavelength λp ----- 518 ----- nm Dominant Wavelength λd 515 ----- 530 nm Spectrum Radiation Bandwidth △λ ----- 35 ----- nm Forward Voltage VF 2.75 ----- 3.95 V Reverse Current IR ----- ----- 50 μA Condition IF=20mA VR=5V Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3.Tolerance of Forward Voltage ±0.1V Bin Range of Luminous Intensity Bin Code Min. Max. S1 180 225 S2 225 285 T1 285 360 T2 360 450 Unit Condition mcd IF =20mA Unit Condition Note: Tolerance of Luminous Intensity: ±11% Bin Range of Dominant Wavelength Group X 3 Copyright Revision :2 © LifecyclePhase: Bin Min. Max. W 515 520 X 520 525 Y 525 530 nm IF =20mA Release Date:2013-08-02 14:09:29.0 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0009337 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 17-21/GHC-XS1T2M/3T Notes: Tolerance of Dominant Wavelength: ±1nm Bin Range Of Forward Voltage Group Bin Min. Max. 5 2.75 3.05 6 3.05 3.35 7 3.35 3.65 8 3.65 3.95 M Unit V Condition IF =20mA Note: Tolerance of Forward Voltage ±0.1V 4 Copyright Revision :2 © LifecyclePhase: Release Date:2013-08-02 14:09:29.0 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0009337 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 17-21/GHC-XS1T2M/3T Typical Electro-Optical Characteristics Curves 5 Copyright Revision :2 © LifecyclePhase: Release Date:2013-08-02 14:09:29.0 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0009337 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 17-21/GHC-XS1T2M/3T Package Dimension Note: Tolerances unless mentioned ±0.1mm. Unit = mm 6 Copyright Revision :2 © LifecyclePhase: Release Date:2013-08-02 14:09:29.0 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0009337 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 17-21/GHC-XS1T2M/3T Moisture Resistant Packing Materials Label Explanation ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Chromaticity Coordinates & Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm 7 Copyright Revision :2 © LifecyclePhase: Release Date:2013-08-02 14:09:29.0 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0009337 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 17-21/GHC-XS1T2M/3T Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging 8 Copyright Revision :2 © LifecyclePhase: Release Date:2013-08-02 14:09:29.0 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0009337 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 17-21/GHC-XS1T2M/3T Aluminum moisture-proof bag Label Desiccant Label Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 9 Copyright Revision :2 © LifecyclePhase: Release Date:2013-08-02 14:09:29.0 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0009337 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 17-21/GHC-XS1T2M/3T 3.1 Pb-free solder temperature profile 2 6 0 °C M a x . 10sec. M ax. A b o v e 2 5 5 °C 3 0 s e c .M a x . 3 °C /s e c .M a x . 6 °C /s e c .M a x . P r e - h e a tin g A b o v e 2 1 7 °C 60~ 150sec. 1 5 0 ~ 2 0 0 °C 6 0~ 12 0sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 10 Copyright Revision :2 © LifecyclePhase: Release Date:2013-08-02 14:09:29.0 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0009337 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 17-21/GHC-XS1T2M/3T EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, 11 Copyright Revision :2 © LifecyclePhase: Release Date:2013-08-02 14:09:29.0 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0009337 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 17-21/GHC-XS1T2M/3T and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. 12 Copyright Revision :2 © LifecyclePhase: Release Date:2013-08-02 14:09:29.0 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0009337 Rev.2 www.everlight.com Expired Period: Forever