17-223/R6G6C-D30/3C

SMD  B 17-223/R6G6C-D30/3C Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Description ․The 17-223 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. 1 Copyright Revision :1 © LifecyclePhase: Date:2013-08-15 09:41:20.0 2010, Everlight All Rights Reserved. Release Date : Aug.6.2013 Issue No:Release DSE-0009416 Rev.1 www.everlight.com Expired Period: Forever DATASHEET SMD  B 17-223/R6G6C-D30/3C Device Selection Guide Chip Code Emitted Color Materials R6 AlGaInP Resin Color Brilliant Red Water Clear G6 AlGaInP Brilliant Yellow Green Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Reverse Voltage VR Code R6 Forward Current Rating Unit 5 V 25 IF eak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge mA G6 25 R6 60 mA IFP G6 60 R6 60 G6 60 R6 2000 Pd mW ESDHBM V G6 2000 Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol 2 Copyright Revision :1 © LifecyclePhase: Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Date:2013-08-15 09:41:20.0 2010, Everlight All Rights Reserved. Release Date : Aug.6.2013 Issue No:Release DSE-0009416 Rev.1 www.everlight.com Expired Period: Forever DATASHEET SMD  B 17-223/R6G6C-D30/3C Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Luminous Intensity Code Min. Typ. Max. R6 5.8 ----- 14.5 2θ1/2 R6 Peak Wavelength Dominant Spectrum 2.3 ----- 5.8 ----- 130 ----- ----- 632 ----- λp Radiation Bandwidth Forward Voltage Reverse Current deg nm G6 ----- 575 ----- R6 617.5 ----- 633.5 λd Wavelength Condition mcd Iv G6 Viewing Angle Unit IF=2mA nm G6 567.5 ----- 575.5 R6 ----- 20 ----- △λ nm G6 ----- 20 ----- R6 1.55 ------ 2.15 V VF G6 1.55 ------ 2.15 R6 ----- ----- 10 μA IR G6 ----- ----- VR=5V 10 Note: 1.Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 3 Copyright Revision :1 © LifecyclePhase: Date:2013-08-15 09:41:20.0 2010, Everlight All Rights Reserved. Release Date : Aug.6.2013 Issue No:Release DSE-0009416 Rev.1 www.everlight.com Expired Period: Forever DATASHEET SMD  B 17-223/R6G6C-D30/3C R6 Bin Range of Luminous Intensity Bin Code Min. Max. JA 5.80 9.00 KA 9.00 14.5 Unit Condition mcd IF =2mA Unit Condition mcd IF =2mA Unit Condition nm IF =2mA Unit Condition nm IF =2mA G6 Bin Range of Luminous Intensity Bin Code Min. Max. GA 2.30 3.60 HA 3.60 5.80 R6 Bin Range of Dominant Wavelength Bin Code Min. Max. E4 617.5 621.5 E5 621.5 625.5 E6 625.5 629.5 E7 629.5 633.5 G6 Bin Range of Dominant Wavelength Bin Code Min. Max. C15 567.5 569.5 C16 569.5 571.5 C17 571.5 573.5 C18 573.5 575.5 4 Copyright Revision :1 © LifecyclePhase: Date:2013-08-15 09:41:20.0 2010, Everlight All Rights Reserved. Release Date : Aug.6.2013 Issue No:Release DSE-0009416 Rev.1 www.everlight.com Expired Period: Forever DATASHEET SMD  B 17-223/R6G6C-D30/3C R6 Bin Range Of Forward Voltage Bin Code Min. Max. 00 1.55 1.75 0 1.75 1.95 1 1.95 2.15 Unit Condition V IF =2mA Unit Condition V IF =2mA G6 Bin Range Of Forward Voltage Bin Code Min. Max. 00 1.55 1.75 0 1.75 1.95 1 1.95 2.15 Note: 1.Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 5 Copyright Revision :1 © LifecyclePhase: Date:2013-08-15 09:41:20.0 2010, Everlight All Rights Reserved. Release Date : Aug.6.2013 Issue No:Release DSE-0009416 Rev.1 www.everlight.com Expired Period: Forever DATASHEET SMD  B 17-223/R6G6C-D30/3C Typical Electro-Optical Characteristics Curves R6 6 Copyright Revision :1 © LifecyclePhase: Date:2013-08-15 09:41:20.0 2010, Everlight All Rights Reserved. Release Date : Aug.6.2013 Issue No:Release DSE-0009416 Rev.1 www.everlight.com Expired Period: Forever DATASHEET SMD  B 17-223/R6G6C-D30/3C Typical Electro-Optical Characteristics Curves G6 7 Copyright Revision :1 © LifecyclePhase: Date:2013-08-15 09:41:20.0 2010, Everlight All Rights Reserved. Release Date : Aug.6.2013 Issue No:Release DSE-0009416 Rev.1 www.everlight.com Expired Period: Forever DATASHEET SMD  B 17-223/R6G6C-D30/3C Package Dimension Note: Tolerances unless mentioned ±0.1mm. Unit = mm 8 Copyright Revision :1 © LifecyclePhase: Date:2013-08-15 09:41:20.0 2010, Everlight All Rights Reserved. Release Date : Aug.6.2013 Issue No:Release DSE-0009416 Rev.1 www.everlight.com Expired Period: Forever DATASHEET SMD  B 17-223/R6G6C-D30/3C Label Explanation Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Chromaticity Coordinates & Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm 9 Copyright Revision :1 © LifecyclePhase: Date:2013-08-15 09:41:20.0 2010, Everlight All Rights Reserved. Release Date : Aug.6.2013 Issue No:Release DSE-0009416 Rev.1 www.everlight.com Expired Period: Forever DATASHEET SMD  B 17-223/R6G6C-D30/3C Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label 10 Copyright Revision :1 © LifecyclePhase: Aluminum moisture-proof bag Desiccant Label Date:2013-08-15 09:41:20.0 2010, Everlight All Rights Reserved. Release Date : Aug.6.2013 Issue No:Release DSE-0009416 Rev.1 www.everlight.com Expired Period: Forever DATASHEET SMD  B 17-223/R6G6C-D30/3C Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 26 0°C M ax. 10 sec. M ax. A bo ve2 55 °C 30 sec.M ax. 3 °C /sec.M ax. 6°C /sec.M ax . P re-heating A bo ve 2 17 °C 60 ~ 15 0sec. 1 50~ 20 0°C 6 0~ 12 0sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 11 Copyright Revision :1 © LifecyclePhase: Date:2013-08-15 09:41:20.0 2010, Everlight All Rights Reserved. Release Date : Aug.6.2013 Issue No:Release DSE-0009416 Rev.1 www.everlight.com Expired Period: Forever DATASHEET SMD  B 17-223/R6G6C-D30/3C Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. 12 Copyright Revision :1 © LifecyclePhase: Date:2013-08-15 09:41:20.0 2010, Everlight All Rights Reserved. Release Date : Aug.6.2013 Issue No:Release DSE-0009416 Rev.1 www.everlight.com Expired Period: Forever