EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Chip LED with Bi-Color (Multi-Color)
18-225/S2G6C-A01/3T
Features
․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Multi-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version.
Descriptions
․The 18-225 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․ Besides, lightweight makes them ideal for miniature applications. etc.
Applications
․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use.
Device Selection Guide
Chip Type S2 G6 Material AlGaInP AlGaInP Emitted Color Brilliant Orange Brilliant Yellow Green
Resin Color Water Clear
Everlight Electronics Co., Ltd. Device No: DSE-0000520
http://www.everlight.com Prepared date: 09-Dec-2008
Rev 2
Page: 1 of 11
Prepared by: Esther Yan
EVERLIGHT ELECTRONICS CO.,LTD.
18-225/S2G6C-A01/3T
Package Outline Dimensions
1.6
4 2
Orange
0.8
43-
UYO SYG
+2 +1
Yellow Green
3
1
Polarity
0.5
For Reflow Soldering(Propose)
0.7
0.8
0.3 0.4 0.5 0.5 0.4
Cathode Mark
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No: DSE-0000520
http://www.everlight.com Prepared date: 09-Dec-2008
Rev 2
Page: 2 of 11
Prepared by: Esther Yan
EVERLIGHT ELECTRONICS CO.,LTD.
18-225/S2G6C-A01/3T
Absolute Maximum Ratings (Ta=25℃)
Parameter Symbol Rating Unit
Reverse Voltage
VR
5 S2:25
V
Forward Current Peak Forward Current
IF
G6:25 S2:60
mA
IFP (Duty 1/10 @1KHz) Power Dissipation Pd
G6:60 S2:60 G6:60 2000
mA
mW
Electrostatic Discharge(HBM)
ESD
V
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +90
℃
Reflow Soldering : 260 ℃ for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 ℃ for 3 sec.
Everlight Electronics Co., Ltd. Device No: DSE-0000520
http://www.everlight.com Prepared date: 09-Dec-2008
Rev 2
Page: 3 of 11
Prepared by: Esther Yan
EVERLIGHT ELECTRONICS CO.,LTD.
18-225/S2G6C-A01/3T
Electro-Optical Characteristics (Ta=25℃)
Parameter Symbol IV S2 G6 Viewing Angle 2θ1/2 λp Min. Typ. Max. Unit Condition
Luminous Intensity
32.0 16.0
48.0 24.0
-----
mcd
IF=20mA
-----
120
-----
deg
IF=20mA
Peak Wavelength
S2 G6
-----
611 575 605 573 17 20 2.0 2.0
-----
nm
IF=20mA
Dominant Wavelength
Λd
S2 G6
-----
-----
nm
IF=20mA
Spectrum Radiation Bandwidth
△λ
S2 G6
----1.7 1.7
----2.4 2.4
nm
IF=20mA
Forward Voltage
VF
S2 G6
V
IF=20mA
Reverse Current
IR
-----
-----
10
μA
VR=5V
Everlight Electronics Co., Ltd. Device No: DSE-0000520
http://www.everlight.com Prepared date: 09-Dec-2008
Rev 2
Page: 4 of 11
Prepared by: Esther Yan
EVERLIGHT ELECTRONICS CO.,LTD.
18-225/S2G6C-A01/3T
Typical Electro-Optical Characteristics Curves S2
Spectrum Distribution Ta=25°C Relative luminous intensity (%) I F(mA) Forward Current vs. Forward Voltage Ta=25°C
Wavelength λ (nm)
Forward Current
Forward Voltage VF (V) Luminous Intensity vs. Forward Current Ta=25°C Relative luminous intensity ( ) %
Luminous Intensity vs. Ambient Temperature Relative luminous intensity ( ) %
Ambient Temperature Ta (°C) Forward Current Derating Curve
Forward Current I F (mA) Radiation Diagram Ta=25°C
Forward Current
IF(mA)
Ambient Temperature Ta (°C)
Everlight Electronics Co., Ltd. Device No: DSE-0000520
http://www.everlight.com Prepared date: 09-Dec-2008
Rev 2
Page: 5 of 11
Prepared by: Esther Yan
EVERLIGHT ELECTRONICS CO.,LTD.
18-225/S2G6C-A01/3T
Typical Electro-Optical Characteristics Curves G6
Spectrum Distribution Ta=25°C Relative luminous intensity (%) IF(mA) Forward Current vs. Forward Voltage Ta=25°C
Forward Current
Wavelength λ (nm) Luminous Intensity vs. Ambient Temperature Relative luminous intensity ( ) % Relative luminous intensity ( ) %
Forward Voltage VF (V) Luminous Intensity vs. Forward Current Ta=25°C
Ambient Temperature Ta (°C) Forward Current Derating Curve
Forward Current Radiation Diagram
IF(mA) Ta=25°C
Forward Current
IF(mA)
Ambient Temperature Ta (°C)
Everlight Electronics Co., Ltd. Device No: DSE-0000520
http://www.everlight.com Prepared date: 09-Dec-2008
Rev 2
Page: 6 of 11
Prepared by: Esther Yan
EVERLIGHT ELECTRONICS CO.,LTD.
18-225/S2G6C-A01/3T
Label Explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
Pb
EVERLIGHT
RoHS
CAT : XXX HUE : XXX REF : XXX
CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
MADE IN TAIWAN
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No: DSE-0000520
http://www.everlight.com Prepared date: 09-Dec-2008
Rev 2
Page: 7 of 11
Prepared by: Esther Yan
EVERLIGHT ELECTRONICS CO.,LTD.
18-225/S2G6C-A01/3T
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
-
Note: The tolerances unless mentioned is ±0.1mm,Unit = mm
Moisture Resistant Packaging
Label
Everlight Electronics Co., Ltd. Device No: DSE-0000520
+
+
Aluminum moisture-proof bag Desiccant Label
http://www.everlight.com Prepared date: 09-Dec-2008 Rev 2 Page: 8 of 11 Prepared by: Esther Yan
EVERLIGHT ELECTRONICS CO.,LTD.
18-225/S2G6C-A01/3T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level:90% LTPD:10%
No. 1
Items Reflow Soldering
Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ IF = 20 mA 85℃/ 85%RH
Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS.
Ac/Re 0/1
2
Temperature Cycle
22 PCS.
0/1
3
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS.
0/1
4 5 6 7
22 PCS. 22 PCS. 22 PCS. 22 PCS.
0/1 0/1 0/1 0/1
Everlight Electronics Co., Ltd. Device No: DSE-0000520
http://www.everlight.com Prepared date: 09-Dec-2008
Rev 2
Page: 9 of 11
Prepared by: Esther Yan
EVERLIGHT ELECTRONICS CO.,LTD.
18-225/S2G6C-A01/3T
Precautions For Use
1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. Device No: DSE-0000520
http://www.everlight.com Prepared date: 09-Dec-2008
Rev 2
Page: 10 of 11
Prepared by: Esther Yan
EVERLIGHT ELECTRONICS CO.,LTD.
18-225/S2G6C-A01/3T
4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Everlight Electronics Co., Ltd. Device No: DSE-0000520
http://www.everlight.com Prepared date: 09-Dec-2008
Rev 2
Page: 11 of 11
Prepared by: Esther Yan