19-213/Y2C-CQ2R2L/3T(CY)

Technical Data Sheet 0603 Package Chip LED (0.6mm Height) 19-213/Y2C-CQ2R2L/3T(CY) Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 19-213 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. ․Indoor signboard use. Device Selection Guide Part No. 19-213/Y2C-CQ2R2L/3T(CY) Revision Chip Material AlGaInP Emitted Color Resin Color Brilliant Yellow Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Device No.: DSE-0008402 Prepared date:2-3-2013 Prepared by:Perfect :1 LifecyclePhase: Page: 1 of 10 Release Date:2013-03-07 16:31:52.0 Expired Period: Forever 19-213/Y2C- CQ2R2L/3T(CY) Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Device No. : DSE-0008402 Prepared date:2-3-2013 Prepared by:Perfect :1 LifecyclePhase: Page: 2 of 10 Release Date:2013-03-07 16:31:52.0 Expired Period: Forever 19-213/Y2C- CQ2R2L/3T(CY) Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA IFP 60 mA Pd 60 mW Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature ESD 2000 V Topr -40 ~ +85 ℃ Storage Temperature Tstg Soldering Temperature Tsol ℃ -40 ~ +90 Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. 90 Typ. Max. Unit ----- 180 mcd Luminous Intensity IV Viewing Angle 2θ1/2 ---- 120 ---- deg Peak Wavelength λp ---- 591 ---- nm Dominant Wavelength λd 585.5 ---- 591.5 nm Spectrum Radiation Bandwidth △λ ---- 15 ---- nm Forward Voltage VF 1.70 --- 2.30 V Reverse Current IR ---- ---- 10 μA Condition IF =20mA VR=5V Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.05 Revision Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Device No. : DSE-0008402 Prepared date:2-3-2013 Prepared by:Perfect :1 LifecyclePhase: Page: 3 of 10 Release Date:2013-03-07 16:31:52.0 Expired Period: Forever 19-213/Y2C- CQ2R2L/3T(CY) Bin Range Of Luminous Intensity Bin Min Max Q2 90 112 R1 112 140 R2 140 180 Unit Condition mcd IF =20mA Unit Condition nm IF =20mA Unit Condition V IF=20mA Bin Range Of Dom. Wavelength Group Bin Min Max D3 585.5 588.5 D4 588.5 591.5 Bin Min Max 19 1.70 1.80 20 1.80 1.90 21 1.90 2.00 22 2.00 2.10 23 2.10 2.20 24 2.20 2.30 C Bin Rang Of Forward Voltage Groups L Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.05 Revision Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Device No. : DSE-0008402 Prepared date:2-3-2013 Prepared by:Perfect :1 LifecyclePhase: Page: 4 of 10 Release Date:2013-03-07 16:31:52.0 Expired Period: Forever 19-213/Y2C- CQ2R2L/3T(CY) Typical Electro-Optical Characteristics Curves Revision Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Device No. : DSE-0008402 Prepared date:2-3-2013 Prepared by:Perfect :1 LifecyclePhase: Page: 5 of 10 Release Date:2013-03-07 16:31:52.0 Expired Period: Forever 19-213/Y2C- CQ2R2L/3T(CY) Label explanation Pb CAT: Luminous Intensity Rank EVERLIGHT CPN : P N : XXXXXXXXXXXXX HUE: Dom. Wavelength Rank RoHS XXXXXXXXXXXXX REF: Forward Voltage Rank CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Device No. : DSE-0008402 Prepared date:2-3-2013 Prepared by:Perfect :1 LifecyclePhase: Page: 6 of 10 Release Date:2013-03-07 16:31:52.0 Expired Period: Forever 19-213/Y2C- CQ2R2L/3T(CY) Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Revision Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Device No. : DSE-0008402 Prepared date:2-3-2013 Prepared by:Perfect :1 LifecyclePhase: Page: 7 of 10 Release Date:2013-03-07 16:31:52.0 Expired Period: Forever 19-213/Y2C- CQ2R2L/3T(CY) Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Ac/Re Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 High Temperature Storage Low Temperature Storage 4 5 Revision Test Sample Hours/Cycles Size No. 6 DC Operating Life IF =20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Device No. : DSE-0008402 Prepared date:2-3-2013 Prepared by:Perfect :1 LifecyclePhase: Page: 8 of 10 Release Date:2013-03-07 16:31:52.0 Expired Period: Forever 19-213/Y2C- CQ2R2L/3T(CY) Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Revision Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Device No. : DSE-0008402 Prepared date:2-3-2013 Prepared by:Perfect :1 LifecyclePhase: Page: 9 of 10 Release Date:2013-03-07 16:31:52.0 Expired Period: Forever 19-213/Y2C- CQ2R2L/3T(CY) 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Revision Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Device No. : DSE-0008402 Prepared date:2-3-2013 Prepared by:Perfect :1 LifecyclePhase: Page: 10 of 10 Release Date:2013-03-07 16:31:52.0 Expired Period: Forever