19-218-T1D-CQ2R2TY-3T

Technical Data Sheet 0603 Package Chip LED (0.3mm Height) 19-218/T1D-CQ2R2TY/3T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 19-218 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Part No. Material 19-218/T1D-CQ2R2TY/3T InGaN Pure White Yellow Diffused Emitted Color Resin Color Everlight Electronics Co., Ltd. Device No. : DSE-0002212 http://www.everlight.com Prepared date:02-Sep-2009 Rev.1 Page: 1 of 12 Prepared by: Esther Yan Revision :1 Release Date:2009-09-03 11:55:19.0 Expired Period: Forever LifecyclePhase: 19-218/T1D-CQ2R2TY/3T Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0002212 http://www.everlight.com Prepared date: 02-Sep-2009 Rev.1 Page: 2 of 12 Prepared by: Esther Yan Revision :1 Release Date:2009-09-03 11:55:19.0 Expired Period: Forever LifecyclePhase: 19-218/T1D-CQ2R2TY/3T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current Peak Forward Current IF 25 mA IFP (Duty 1/10 @1KHz) Power Dissipation Pd 100 mA 110 mW Electrostatic Discharge(HBM) ESD 150 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Reflow Soldering : 260 ℃ for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. Device No. : DSE-0002212 http://www.everlight.com Prepared date: 02-Sep-2009 Rev.1 Page: 3 of 12 Prepared by: Esther Yan Revision :1 Release Date:2009-09-03 11:55:19.0 Expired Period: Forever LifecyclePhase: 19-218/T1D-CQ2R2TY/3T Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Viewing Angle Forward Voltage Reverse Current Symbol Iv 2θ1/2 VF IR Min. 90.0 ----2.60 ----- Typ. ----130 --------- Max. 180 ----3.00 50 Unit mcd deg V μA Condition IF=5mA VR=5V Bin Range Of Luminous Intensity & Forward Voltage Symbol Bin Code Q2 IV R1 R2 28 VF 29 30 31 Min. 90.0 112 140 2.60 2.70 2.80 2.90 Max. 112 140 180 2.70 2.80 2.90 3.00 V IF=5mA mcd IF=5mA Unit Condition Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Forward Voltage ±0.05V Everlight Electronics Co., Ltd. Device No. : DSE-0002212 http://www.everlight.com Prepared date: 02-Sep-2009 Rev.1 Page: 4 of 12 Prepared by: Esther Yan Revision :1 Release Date:2009-09-03 11:55:19.0 Expired Period: Forever LifecyclePhase: 19-218/T1D-CQ2R2TY/3T Chromaticity Coordinates Specifications for Bin Grading Group Bin Code CIE_x 0.274 0.274 0.294 0.294 0.274 0.274 0.294 0.294 0.294 0.294 0.314 0.314 0.294 0.294 0.314 0.314 CIE_y 0.226 0.258 0.286 0.254 0.258 0.291 0.319 0.286 0.254 0.286 0.315 0.282 0.286 0.319 0.347 0.315 Condition 1 2 C 3 IF= 5mA 4 Notes: 1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01). 2.The products are sensitive to static electricity and care must be fully taken when handling products. Everlight Electronics Co., Ltd. Device No. : DSE-0002212 http://www.everlight.com Prepared date: 02-Sep-2009 Rev.1 Page: 5 of 12 Prepared by: Esther Yan Revision :1 Release Date:2009-09-03 11:55:19.0 Expired Period: Forever LifecyclePhase: 19-218/T1D-CQ2R2TY/3T CIE Chromaticity Diagram Everlight Electronics Co., Ltd. Device No. : DSE-0002212 http://www.everlight.com Prepared date: 02-Sep-2009 Rev.1 Page: 6 of 12 Prepared by: Esther Yan Revision :1 Release Date:2009-09-03 11:55:19.0 Expired Period: Forever LifecyclePhase: 19-218/T1D-CQ2R2TY/3T Typical Electro-Optical Characteristics Curves Spectrum Distribution Relative luminous intensity (%) 100 75 50 25 Ta=25°C Forward Current IF (mA) Forward Current vs. Forward Voltage Ta=25°C 0 400 500 600 700 800 Forward Voltage VF (V) Luminous Intensity vs. Forward Current Ta=25°C Relative luminous intensity ( ) % Wavelength λ (nm) Luminous Intensity vs. Ambient Temperature Relative luminous intensity ( ) % Ambient Temperature Ta (°C) Forward Current I F (mA) Radiation Diagram Forward Current Derating Curve Ta=25°C Forward Current I F (mA) Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. Device No. : DSE-0002212 http://www.everlight.com Prepared date: 02-Sep-2009 Rev.1 Page: 7 of 12 Prepared by: Esther Yan Revision :1 Release Date:2009-09-03 11:55:19.0 Expired Period: Forever LifecyclePhase: 19-218/T1D-CQ2R2TY/3T Label Explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Pb EVERLIGHT RoHS CAT : XXX HUE : XXX REF : XXX CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0002212 http://www.everlight.com Prepared date: 02-Sep-2009 Rev.1 Page: 8 of 12 Prepared by: Esther Yan Revision :1 Release Date:2009-09-03 11:55:19.0 Expired Period: Forever LifecyclePhase: 19-218/T1D-CQ2R2TY/3T Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No. : DSE-0002212 http://www.everlight.com Prepared date: 02-Sep-2009 Rev.1 Page: 9 of 12 Prepared by: Esther Yan Revision :1 Release Date:2009-09-03 11:55:19.0 Expired Period: Forever LifecyclePhase: 19-218/T1D-CQ2R2TY/3T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. 1 Items Reflow Soldering Test Condition Temp. : 260℃±5℃ Max. 10sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ IF = 20 mA 85℃/ 85%RH Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS. Ac/Re 0/1 2 Temperature Cycle 22 PCS. 0/1 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 22 PCS. 0/1 4 5 6 7 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-0002212 http://www.everlight.com Prepared date: 02-Sep-2009 Rev.1 Page: 10 of 12 Prepared by: Esther Yan Revision :1 Release Date:2009-09-03 11:55:19.0 Expired Period: Forever LifecyclePhase: 19-218/T1D-CQ2R2TY/3T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile A bo ve25 5°C 3 0sec.M ax . 2 60°C M ax. 1 0sec. M ax . 6°C /sec.M ax. 3° C /sec.M ax. P re-heating 1 50~ 200°C 60~ 120sec. A bove 217°C 60~ 15 0sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No. : DSE-0002212 http://www.everlight.com Prepared date: 02-Sep-2009 Rev.1 Page: 11 of 12 Prepared by: Esther Yan Revision :1 Release Date:2009-09-03 11:55:19.0 Expired Period: Forever LifecyclePhase: 19-218/T1D-CQ2R2TY/3T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : DSE-0002212 http://www.everlight.com Prepared date: 02-Sep-2009 Rev.1 Page: 12 of 12 Prepared by: Esther Yan Revision :1 Release Date:2009-09-03 11:55:19.0 Expired Period: Forever LifecyclePhase: