19-22-G6R6C-A31-2T

EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Chip LED with Bi-Color(Multi-Color) 19-22/G6R6C-A31/2T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Multi-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․ The 19-22 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Type G6 R6 Material AlGaInP AlGaInP Emitted Color Brilliant Yellow Green Brilliant Red Resin Color Water Clear Everlight Electronics Co., Ltd. Device No. : DSE-0000153 http://www.everlight.com Prepared date: 28-Sep-2008 Rev. 1 Page: 1 of 11 Prepared by:Cheng Dejiang EVERLIGHT ELECTRONICS CO.,LTD. 19-22/G6R6C-A31/2T Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0000153 http://www.everlight.com Prepared date: 28-Sep-2008 Rev. 1 Page: 2 of 11 Prepared by:Cheng Dejiang EVERLIGHT ELECTRONICS CO.,LTD. 19-22/G6R6C-A31/2T Absolute Maximum Ratings (Ta=25℃) Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 G6:25 R6:25 G6:60 R6:60 G6:60 R6:60 G6:2000 R6:2000 -40 ~ +85 -40 ~ +90 Unit V mA mA mW V ℃ ℃ Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : Typ. ----130 575 632 573 624 20 20 2.0 2.0 ----Max. 57.0 90.0 ------------350 ℃ for 3 sec. Unit mcd deg nm nm IF=20mA Condition Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Symbol Iv G6 R6 Min. 22.5 45.0 ------------- 2θ1/2 λp λd G6 R6 G6 R6 △λ G6 R6 ----1.7 1.7 ----- ----2.4 2.4 10 10 nm Forward Voltage VF G6 R6 V VR=5V Reverse Current IR G6 R6 μA Notes: 1.Tolerance of Luminous Intensity ±11% Everlight Electronics Co., Ltd. Device No. : DSE-0000153 http://www.everlight.com Prepared date: 28-Sep-2008 Rev. 1 Page: 3 of 11 Prepared by:Cheng Dejiang EVERLIGHT ELECTRONICS CO.,LTD. 19-22/G6R6C-A31/2T Bin Range Of Luminous Intensity G6 Bin M2 N1 N2 P1 Min 22.5 28.5 36.0 45.0 Max 28.5 36.0 45.0 57.0 mcd IF =20mA Unit Condition R6 Bin P1 P2 Q1 Min 45.0 57.0 72.0 Max 57.0 72.0 90.0 mcd IF =20mA Unit Condition Notes: 1.Tolerance of Luminous Intensity ±11% Everlight Electronics Co., Ltd. Device No. : DSE-0000153 http://www.everlight.com Prepared date: 28-Sep-2008 Rev. 1 Page: 4 of 11 Prepared by:Cheng Dejiang EVERLIGHT ELECTRONICS CO.,LTD. 19-22/G6R6C-A31/2T Typical Electro-Optical Characteristics Curves G6 Ta=25°C Relative luminous intensity ( % ) I (mA) Ta=25°C Wavelength λ(nm) Forward Current Forward Voltage VF (V) Ta=25°C Relative luminous intensity ( % ) Relative luminous intensity ( %) Ambient Temperature Ta(°C ) Forward Current I (mA) Ta=25°C I (mA) Forward Current Ambient Temperature Ta (°C ) Everlight Electronics Co., Ltd. Device No. : DSE-0000153 http://www.everlight.com Prepared date: 28-Sep-2008 Rev. 1 Page: 5 of 11 Prepared by:Cheng Dejiang EVERLIGHT ELECTRONICS CO.,LTD. 19-22/G6R6C-A31/2T Typical Electro-Optical Characteristics Curves R6 Relative luminous intensity (%) 100 75 Spectrum Distribution Ta=25°C Ta=25°C I (mA) 50 25 0 500 550 600 650 700 Forward Current Wavelength λ (nm) Forward Voltage VF (V) Ta=25°C Relative luminous intensity ( % ) Relative luminous intensity ( %) Ambient Temperature Ta(°C ) Forward Current I (mA) Ta=25°C Forward Current I (mA) Ambient Temperature Ta (°C ) Everlight Electronics Co., Ltd. Device No. : DSE-0000153 http://www.everlight.com Prepared date: 28-Sep-2008 Rev. 1 Page: 6 of 11 Prepared by:Cheng Dejiang EVERLIGHT ELECTRONICS CO.,LTD. 19-22/G6R6C-A31/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank XXXXXXXXXXXXX QTY : XXX CAT : XXX HUE : XXX REF : XXX Pb EVERLIGHT RoHS CPN : P N : XXXXXXXXXXXXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0000153 http://www.everlight.com Prepared date: 28-Sep-2008 Rev. 1 Page: 7 of 11 Prepared by:Cheng Dejiang EVERLIGHT ELECTRONICS CO.,LTD. 19-22/G6R6C-A31/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No. : DSE-0000153 http://www.everlight.com Prepared date: 28-Sep-2008 Rev. 1 Page: 8 of 11 Prepared by:Cheng Dejiang EVERLIGHT ELECTRONICS CO.,LTD. 19-22/G6R6C-A31/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. 1 2 Items Reflow Soldering Temperature Cycle Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ IF = 20 mA 85℃/ 85%RH Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS. 22 PCS. Ac/Re 0/1 0/1 3 4 5 6 7 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-0000153 http://www.everlight.com Prepared date: 28-Sep-2008 Rev. 1 Page: 9 of 11 Prepared by:Cheng Dejiang EVERLIGHT ELECTRONICS CO.,LTD. 19-22/G6R6C-A31/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No. : DSE-0000153 http://www.everlight.com Prepared date: 28-Sep-2008 Rev. 1 Page: 10 of 11 Prepared by:Cheng Dejiang EVERLIGHT ELECTRONICS CO.,LTD. 19-22/G6R6C-A31/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : DSE-0000153 http://www.everlight.com Prepared date: 28-Sep-2008 Rev. 1 Page: 11 of 11 Prepared by:Cheng Dejiang