19-223/S2T1D-C30/2T

SMD  B 19-223/S2T1D-C30/2T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Multi-color type. ․Pb-free. ․ESD Protection. ․The product itself will remain within RoHS compliant version. Description ․The 19-223 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. 1 Copyright Revision :2 © LifecyclePhase: Release Date:2014-01-22 14:24:30.0 2010, Everlight All Rights Reserved. Release Date : 20-Jan-2014. Issue No: DSE-0010617 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  B 19-223/S2T1D-C30/2T Device Selection Guide Chip Code Emitted Color Materials S2 AlGaInP Brilliant Resin Color Orange Yellow Diffused T1 InGaN Pure White Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge Code Rating Unit VR 5 V IF 25 mA S2 60 T1 100 S2 60 mA IFP Pd mW T1 95 S2 2000 ESDHBM V T1 150 Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol 2 Copyright Revision :2 © LifecyclePhase: Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Release Date:2014-01-22 14:24:30.0 2010, Everlight All Rights Reserved. Release Date : 20-Jan-2014. Issue No: DSE-0010617 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  B 19-223/S2T1D-C30/2T Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Luminous Intensity Code Min. Typ. Max. S2 18.0 ----- 45.0 T1 2θ1/2 Peak Wavelength λp S2 45.0 ----- 112 ----- 140 ----- deg ----- 611 ----- nm IF=5mA Dominant Wavelength Spectrum Condition mcd Iv Viewing Angle Unit Radiation Bandwidth Forward Voltage Reverse Current λd S2 600.5 ----- 609.5 nm △λ S2 ----- 17 ----- nm S2 1.70 ---- 2.40 V VF T1 2.70 ---- 3.70 S2 ----- ----- 10 μA IR T1 ----- ----- VR=5V 50 Note: 1.Tolerance of Luminous Intensity: ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage: ±0.10V 3 Copyright Revision :2 © LifecyclePhase: Release Date:2014-01-22 14:24:30.0 2010, Everlight All Rights Reserved. Release Date : 20-Jan-2014. Issue No: DSE-0010617 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  B 19-223/S2T1D-C30/2T Bin Range of Luminous Intensity S2 Bin Code Min. Max. Unit Condition M N 18.0 28.5 28.5 45.0 mcd IF =5mA Bin Range of Luminous Intensity T1 Bin Code Min. Max. Unit Condition P Q 45.0 72.0 72.0 112 mcd IF =5mA Note: 1. Tolerance of Luminous Intensity: ±11% 4 Copyright Revision :2 © LifecyclePhase: Release Date:2014-01-22 14:24:30.0 2010, Everlight All Rights Reserved. Release Date : 20-Jan-2014. Issue No: DSE-0010617 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  B 19-223/S2T1D-C30/2T Chromaticity Coordinates Specifications for Bin Grading T1 Bin Code 1 2 3 4 CIE_x CIE_y 0.274 0.226 0.274 0.258 0.294 0.286 0.294 0.254 0.274 0.258 0.274 0.291 0.294 0.319 0.294 0.286 0.294 0.254 0.294 0.286 0.314 0.315 0.314 0.282 0.294 0.286 0.294 0.319 0.314 0.347 0.314 0.315 Condition IF =5mA Notes: 1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01 ). 2.The products are sensitive to static electricity and care must be fully taken when handling products. 5 Copyright Revision :2 © LifecyclePhase: Release Date:2014-01-22 14:24:30.0 2010, Everlight All Rights Reserved. Release Date : 20-Jan-2014. Issue No: DSE-0010617 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  B 19-223/S2T1D-C30/2T CIE Chromaticity Diagram T1 6 Copyright Revision :2 © LifecyclePhase: Release Date:2014-01-22 14:24:30.0 2010, Everlight All Rights Reserved. Release Date : 20-Jan-2014. Issue No: DSE-0010617 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  B 19-223/S2T1D-C30/2T Typical Electro-Optical Characteristics Curves S2 Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C Forward Current I F(mA) Ta=25°C Forward Voltage VF (V) Wavelength λ (nm) Luminous Intensity vs. Forward Current Ta=25°C Luminous Intensity vs. Relative luminous intensity (% ) Relative luminous intensity (% ) Ambient Temperature Ambient Temperature Ta (°C) Radiation Diagram Ta=25°C Forward Current IF(mA) Forward Current Derating Curve Forward Current I F (mA) Ambient Temperature Ta (°C) 7 Copyright Revision :2 © LifecyclePhase: Release Date:2014-01-22 14:24:30.0 2010, Everlight All Rights Reserved. Release Date : 20-Jan-2014. Issue No: DSE-0010617 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  B 19-223/S2T1D-C30/2T Typical Electro-Optical Characteristics Curves T1 Forward Current vs. Forward Voltage Ta=25°C 100 Ta=25°C Forward Current IF (mA) Relative luminous intensity (%) Spectrum Distribution 75 50 25 0 400 500 600 700 800 Forward Voltage VF (V) Wavelength λ (nm) Luminous Intensity vs. Luminous Intensity vs. Forward Current Ta=25°C Relative luminous intensity (% ) Relative luminous intensity (% ) Ambient Temperature Ambient Temperature Ta (°C) Radiation Diagram Ta=25°C Forward Current I F (mA) Forward Current Derating Curve Forward Current I F (mA) Ambient Temperature Ta (°C) 8 Copyright Revision :2 © LifecyclePhase: Release Date:2014-01-22 14:24:30.0 2010, Everlight All Rights Reserved. Release Date : 20-Jan-2014. Issue No: DSE-0010617 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  B 19-223/S2T1D-C30/2T Package Dimension Suggested pad dimension is just for reference only. Please modify the pad dimension based on individual need. Note: Tolerances unless mentioned ±0.1mm. Unit = mm 9 Copyright Revision :2 © LifecyclePhase: Release Date:2014-01-22 14:24:30.0 2010, Everlight All Rights Reserved. Release Date : 20-Jan-2014. Issue No: DSE-0010617 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  B 19-223/S2T1D-C30/2T Moisture Resistant Packing Materials Label Explanation Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Chromaticity Coordinates & Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm 10 Copyright Revision :2 © LifecyclePhase: Release Date:2014-01-22 14:24:30.0 2010, Everlight All Rights Reserved. Release Date : 20-Jan-2014. Issue No: DSE-0010617 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  B 19-223/S2T1D-C30/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label 11 Copyright Revision :2 © LifecyclePhase: Aluminum moisture-proof bag Desiccant Label Release Date:2014-01-22 14:24:30.0 2010, Everlight All Rights Reserved. Release Date : 20-Jan-2014. Issue No: DSE-0010617 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  B 19-223/S2T1D-C30/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 26 0°C M ax. 10 sec. M ax. A bo ve2 55 °C 30 sec.M ax. 3 °C /sec.M ax. 6°C /sec.M ax . P re-heating A bo ve 2 17 °C 60 ~ 15 0sec. 1 50~ 20 0°C 6 0~ 12 0sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 12 Copyright Revision :2 © LifecyclePhase: Release Date:2014-01-22 14:24:30.0 2010, Everlight All Rights Reserved. Release Date : 20-Jan-2014. Issue No: DSE-0010617 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD  B 19-223/S2T1D-C30/2T Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. 13 Copyright Revision :2 © LifecyclePhase: Release Date:2014-01-22 14:24:30.0 2010, Everlight All Rights Reserved. Release Date : 20-Jan-2014. Issue No: DSE-0010617 Rev.2 www.everlight.com Expired Period: Forever