19-237/R6GHBHC-D01/2T

Technical Data Sheet Full Color Chip LED 19-237/R6GHBHC-D01/2T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Multi-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 19-237 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Type Material Emitted Color R6 AlGaInP Brilliant Red GH InGaN Brilliant Green BH InGaN Blue Resin Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 1 of 13 Device No. : DSE-0004282 Prepared date: 31-Dec-2010 Prepared by : Ashley Kuo 19-237/R6GHBHC-D01/2T Package Outline Dimensions 1.6 Green Blue 3 1 4 1.6 2 Anode mark Red 1.1 0.35 1.0 0.8 For reflow soldering (propose) 2 3 0.55 0.55 0.35 0.55 4 0.55 1 0.8 2.4 Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 2 of 13 Device No. : DSE-0004282 Prepared date: 31-Dec-2010 Prepared by : Ashley Kuo 19-237/R6GHBHC-D01/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V R6:25 Forward Current IF mA GH:25 BH:25 Peak Forward Current (Duty 1/10 @1KHz) R6:60 IFP mA GH:100 BH:100 R6:60 Power Dissipation Pd mW GH:95 BH:95 R6:2000 Electrostatic Discharge(HBM) ESD V GH:150 BH:150 Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 3 of 13 Device No. : DSE-0004282 Prepared date: 31-Dec-2010 Prepared by : Ashley Kuo 19-237/R6GHBHC-D01/2T Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Viewing Angle Symbol Iv Min. R6 5.8 GH 28.5 BH 5.8 2θ1/2 ----- λp GH ----- λd R6 618 GH 520 BH 465 △λ GH ----- VF 72.0 120 ----- deg 518 ----- nm 628 ----- 535 IR IF=2mA 20 ----- 35 ----- nm 25 R6 1.6 GH 2.6 BH 2.6 GH nm 475 2.0 ----- 3.0 V 3.0 10 R6 Reverse Current mcd 14.5 BH Forward Voltage Condition 14.5 R6 Spectrum Radiation Bandwidth Unit 468 BH Dominant Wavelength Max. 632 R6 Peak Wavelength Typ. ----- ----- 50 μA VR=5V 50 BH Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.05V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 4 of 13 Device No. : DSE-0004282 Prepared date: 31-Dec-2010 Prepared by : Ashley Kuo 19-237/R6GHBHC-D01/2T R6 Bin Range Of Luminous Intensity Bin Min Max JA 5.8 9.0 KA 9.0 14.5 Unit Condition mcd IF=2mA Unit Condition mcd IF =2mA Unit Condition nm IF=2mA Unit Condition mcd IF=2mA Unit Condition nm IF=2mA GH Bin Range Of Luminous Intensity Bin Min Max N 28.5 45.0 P 45.0 72.0 Bin Range Of Dom. Wavelength Bin Min Max X 520 525 Y 525 530 Z 530 535 BH Bin Range Of Luminous Intensity Bin Min Max JA 5.8 9.0 KA 9.0 14.5 Bin Range Of Dom. Wavelength Bin Min Max X 465 470 Y 470 475 Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 5 of 13 Device No. : DSE-0004282 Prepared date: 31-Dec-2010 Prepared by : Ashley Kuo 19-237/R6GHBHC-D01/2T Typical Electro-Optical Characteristics Curves R6 Forward Current vs. Forward Voltage Ta=25°C Forward Current IF (mA) 100 75 50 25 0 500 1000 550 600 650 Wavelength λ (nm) 40 30 25 20 10 1.6 2.0 2.4 2.8 3.0 Forward Voltage V F (V) Luminous Intensity vs. Luminous Intensity vs. Ambient Temperature Forward Current 100 10 1 -60 -40 -20 0 20 40 60 80 100 Ta=25°C 1000 100 10 1 0 10 10 1 10 2 Forward Current IF (mA) Ambient Temperature Ta (°C) Radiation Diagram Forward Current Derating Curve Forward Current IF (mA) Ta=25°C 50 0 1.2 700 Relative luminous intensity (%) Relative luminous intensity (%) Relative luminous intensity (%) Spectrum Distribution 0° 50 10° Ta=25°C 20° 30° 40 40° 30 25 1.0 0.9 20 50° 0.8 60° 10 0.7 0 0 20 40 60 85 100 0.5 0.3 0.1 0.2 0.4 0.6 70° 80° 90° Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 6 of 13 Device No. : DSE-0004282 Prepared date: 31-Dec-2010 Prepared by : Ashley Kuo 19-237/R6GHBHC-D01/2T Typical Electro-Optical Characteristics Curves GH Spectrum Distribution I (mA) 40 F 75 Forward Current vs. Forward Voltage Ta=25°C 50 100 30 Forward Current Relative luminous intensity (%) Ta=25° 50 25 0 400 450 500 550 25 20 10 0 2.6 600 3.0 Relative luminous intensity (%) Relative luminous intensity (%) Ambient Temperature 100 10 0 1000 10 1 10 20 40 60 80 100 10 10 Forward Current IF(mA) Radiation Diagram Forward Current Derating Curve Ta=25°C 0° 50 IF(mA) 4.5 100 Ambient Temperature Ta (°C) Forward Current 4.2 Luminous Intensity vs Forward Current Ta=25°C Luminous Intensity vs. 1 -60 -40 -20 3.8 Forward Voltage VF (V) Wavelength λ (nm) 1000 3.4 10° 20° 30° 40 30 25 20 10 0 40° 1.0 0.9 50° 0.8 60° 70° 0.7 20 0 40 60 85 100 Ambient Temperature Ta (°C) 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 7 of 13 Device No. : DSE-0004282 Prepared date: 31-Dec-2010 Prepared by : Ashley Kuo 19-237/R6GHBHC-D01/2T Typical Electro-Optical Characteristics Curves BH Forward Current vs. Forward Voltage Ta=25°C 100 Forward Current IF (mA) Relative luminous intensity (%) Spectrum Distribution 75 50 25 0 400 450 500 550 40 30 25 20 10 0 2.6 600 3.4 3.8 4.2 Luminous Intensity vs. Luminous Intensity vs. Ambient Temperature Forward Current 100 10 1 -60 -40 -20 0 4.5 20 40 60 80 100 Ta=25°C 1000 100 10 1 10 2 1 10 10 Forward Current IF (mA) Ambient Temperature Ta (°C) Radiation Diagram 0° 10° Forward Current Derating Curve Forward Current IF (mA) 3.0 Forward Voltage VF (V) Relative luminous intensity (%) Relative luminous intensity (%) Wavelength λ (nm) 1000 Ta=25°C 50 50 Ta=25°C 20° 30° 40 30 25 1.0 20 0.8 0.9 10 0 40° 50° 60° 70° 0.7 0 20 40 60 85 100 Ambient Temperature Ta (°C) 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 8 of 13 Device No. : DSE-0004282 Prepared date: 31-Dec-2010 Prepared by : Ashley Kuo 19-237/R6GHBHC-D01/2T Label Explanation CAT: Luminous Intensity Rank Pb HUE: Dom. Wavelength Rank CPN : P N : XXXXXXXXXXXXX REF: Forward Voltage Rank EVERLIGHT RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm , Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 9 of 13 Device No. : DSE-0004282 Prepared date: 31-Dec-2010 Prepared by : Ashley Kuo 19-237/R6GHBHC-D01/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 10 of 13 Device No. : DSE-0004282 Prepared date: 31-Dec-2010 Prepared by : Ashley Kuo 19-237/R6GHBHC-D01/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Hours/Cycles Size Ac/Re No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Max. 10sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 11 of 13 Device No. : DSE-0004282 Prepared date: 31-Dec-2010 Prepared by : Ashley Kuo 19-237/R6GHBHC-D01/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 26 0°C M ax . 10 sec. M ax. A bo ve25 5°C 3 0sec.M ax . 3°C /sec.M ax . 6°C /sec.M ax . P re-h eatin g A b o v e 2 1 7 °C 6 0~ 1 5 0sec. 1 50 ~ 20 0 °C 6 0 ~ 1 2 0 sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 12 of 13 Device No. : DSE-0004282 Prepared date: 31-Dec-2010 Prepared by : Ashley Kuo 19-237/R6GHBHC-D01/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 13 of 13 Device No. : DSE-0004282 Prepared date: 31-Dec-2010 Prepared by : Ashley Kuo